[PATCH 10/10] MTD/GPMI : change the code for new DMA interface

[Huang Shijie]

Please read more comment in the mxs-dma.h.

In the new GPMI version(0x05010000 used by MX6Q/MX50), we should
set the WAIT4END bit in the middle one of this chain,
which enables the BCH module and reads out the NAND page.
If we do not do this, a DMA timeout occurs. This bug has been
catched in the MX6Q board.

We have changed the DMA interface to fix the bug, now use the new
interface.

Signed-off-by: Huang Shijie <b32955@xxxxxxxxxxxxx>
---
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c |   20 ++++++++++++++------
 1 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 5b73ae5..84abd49 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -842,7 +842,7 @@ int gpmi_send_command(struct gpmi_nand_data *this)
 	sg_init_one(sgl, this->cmd_buffer, this->command_length);
 	dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
 	desc = channel->device->device_prep_slave_sg(channel,
-					sgl, 1, DMA_MEM_TO_DEV, 1);
+				sgl, 1, DMA_MEM_TO_DEV, MXS_DMA_F_LASTONE);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -884,7 +884,7 @@ int gpmi_send_data(struct gpmi_nand_data *this)
 	/* [2] send DMA request */
 	prepare_data_dma(this, DMA_TO_DEVICE);
 	desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
-						1, DMA_MEM_TO_DEV, 1);
+					1, DMA_MEM_TO_DEV, MXS_DMA_F_LASTONE);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -920,7 +920,7 @@ int gpmi_read_data(struct gpmi_nand_data *this)
 	/* [2] : send DMA request */
 	prepare_data_dma(this, DMA_FROM_DEVICE);
 	desc = channel->device->device_prep_slave_sg(channel, &this->data_sgl,
-						1, DMA_DEV_TO_MEM, 1);
+					1, DMA_DEV_TO_MEM, MXS_DMA_F_LASTONE);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -967,7 +967,8 @@ int gpmi_send_page(struct gpmi_nand_data *this,
 
 	desc = channel->device->device_prep_slave_sg(channel,
 					(struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
+					ARRAY_SIZE(pio), DMA_TRANS_NONE,
+					MXS_DMA_F_WAIT4END);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -987,6 +988,7 @@ int gpmi_read_page(struct gpmi_nand_data *this,
 	struct dma_async_tx_descriptor *desc;
 	struct dma_chan *channel = get_dma_chan(this);
 	int chip = this->current_chip;
+	unsigned long flags;
 	u32 pio[6];
 
 	/* [1] Wait for the chip to report ready. */
@@ -1029,9 +1031,14 @@ int gpmi_read_page(struct gpmi_nand_data *this,
 	pio[3] = geo->page_size;
 	pio[4] = payload;
 	pio[5] = auxiliary;
+
+	/* If the GPMI is new version, set MXS_DMA_F_WAIT4END here. */
+	flags = MXS_DMA_F_APPEND;
+	if (this->gpmi_version == GPMI_VERSION_0501)
+		flags |= MXS_DMA_F_WAIT4END;
 	desc = channel->device->device_prep_slave_sg(channel,
 					(struct scatterlist *)pio,
-					ARRAY_SIZE(pio), DMA_TRANS_NONE, 1);
+					ARRAY_SIZE(pio), DMA_TRANS_NONE, flags);
 	if (!desc) {
 		pr_err("step 2 error\n");
 		return -1;
@@ -1048,9 +1055,10 @@ int gpmi_read_page(struct gpmi_nand_data *this,
 		| BF_GPMI_CTRL0_ADDRESS(address)
 		| BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
 	pio[1] = 0;
+	pio[2] = 0;
 	desc = channel->device->device_prep_slave_sg(channel,
 				(struct scatterlist *)pio, 2,
-				DMA_TRANS_NONE, 1);
+				DMA_TRANS_NONE, MXS_DMA_F_LASTONE);
 	if (!desc) {
 		pr_err("step 3 error\n");
 		return -1;
-- 
1.7.0.4


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/