[PATCH 08/10] hpsa: eliminate 8 external target limitation
From: Stephen M. Cameron
Date: Thu Jan 19 2012 - 15:02:13 EST
From: Scott Teel <scott.teel@xxxxxx>
Driver limits SAS external target IDs to range 1-8.
Need to increase limit and clean up overlapping concepts of targets and paths
in the code.
There are several defined constants that control this:
HPSA_MAX_TARGETS_PER_CTLR 16
MAX_MSA2XXX_ENCLOSURES 32
HPSA_MAX_PATHS 8
We can condense this to one constant:
MAX_EXT_TARGETS 32
SAS switches allow for 8 connections, and there is capacity for 4 switches per
enclosure in largest blade enclosure type.
Signed-off-by: Scott Teel <scott.teel@xxxxxx>
Signed-off-by: Stephen M. Cameron <scameron@xxxxxxxxxxxxxxxxxx>
---
drivers/scsi/hpsa.c | 16 ++++++++--------
drivers/scsi/hpsa_cmd.h | 5 ++---
2 files changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index ea9b685..39ac161 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1692,9 +1692,9 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h,
if (is_scsi_rev_5(h))
return 0; /* p1210m doesn't need to do this. */
- if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) {
- dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX "
- "enclosures exceeded. Check your hardware "
+ if (*nmsa2xxx_enclosures >= MAX_EXT_TARGETS) {
+ dev_warn(&h->pdev->dev, "Maximum number of external "
+ "target devices exceeded. Check your hardware "
"configuration.");
return 0;
}
@@ -1800,7 +1800,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 8;
int i, nmsa2xxx_enclosures, ndevs_to_allocate;
int raid_ctlr_position;
- DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR);
+ DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS);
currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_DEVICES, GFP_KERNEL);
physdev_list = kzalloc(reportlunsize, GFP_KERNEL);
@@ -1817,11 +1817,11 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
logdev_list, &nlogicals))
goto out;
- /* We might see up to 32 MSA2xxx enclosures, actually 8 of them
- * but each of them 4 times through different paths. The plus 1
- * is for the RAID controller.
+ /* We might see up to the maximum number of logical and physical disks
+ * plus external target devices, and a device for the local RAID
+ * controller.
*/
- ndevs_to_allocate = nphysicals + nlogicals + MAX_MSA2XXX_ENCLOSURES + 1;
+ ndevs_to_allocate = nphysicals + nlogicals + MAX_EXT_TARGETS + 1;
/* Allocate the per device structures */
for (i = 0; i < ndevs_to_allocate; i++) {
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index 516d6e5..8049815 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -122,12 +122,11 @@ union u64bit {
};
/* FIXME this is a per controller value (barf!) */
-#define HPSA_MAX_TARGETS_PER_CTLR 16
#define HPSA_MAX_LUN 1024
#define HPSA_MAX_PHYS_LUN 1024
-#define MAX_MSA2XXX_ENCLOSURES 32
+#define MAX_EXT_TARGETS 32
#define HPSA_MAX_DEVICES (HPSA_MAX_PHYS_LUN + HPSA_MAX_LUN + \
- MAX_MSA2XXX_ENCLOSURES + 1) /* + 1 is for the controller itself */
+ MAX_EXT_TARGETS + 1) /* + 1 is for the controller itself */
/* SCSI-3 Commands */
#pragma pack(1)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/