[PATCH] PCI: Fix device class print out

From: Yinghai Lu
Date: Sun Feb 19 2012 - 17:50:45 EST


Found debug print out about class is shifted.

| pci 0000:f8:15.2: [8086:2b56] type 0 class 0x000600

code is trying to print class with 6 digits, but use shifted class with 4 digits
valid value as variable.

Change to original dev->class directly.

also remove not needed calculating of local variable class, because it will be
updated after pci_fixup_device(pci_fixup_early...)

Also unify type print out when class and header is not matched.

Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>

---
drivers/pci/probe.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)

Index: linux-2.6/drivers/pci/probe.c
===================================================================
--- linux-2.6.orig/drivers/pci/probe.c
+++ linux-2.6/drivers/pci/probe.c
@@ -1125,12 +1125,10 @@ int pci_setup_device(struct pci_dev *dev

pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
dev->revision = class & 0xff;
- class >>= 8; /* upper 3 bytes */
- dev->class = class;
- class >>= 8;
+ dev->class = class >> 8; /* upper 3 bytes */

- dev_printk(KERN_DEBUG, &dev->dev, "[%04x:%04x] type %d class %#08x\n",
- dev->vendor, dev->device, dev->hdr_type, class);
+ dev_printk(KERN_DEBUG, &dev->dev, "[%04x:%04x] type %02x class %#08x\n",
+ dev->vendor, dev->device, dev->hdr_type, dev->class);

/* need to have dev->class ready */
dev->cfg_size = pci_cfg_space_size(dev);
@@ -1212,8 +1210,8 @@ int pci_setup_device(struct pci_dev *dev
return -EIO;

bad:
- dev_err(&dev->dev, "ignoring class %02x (doesn't match header "
- "type %02x)\n", class, dev->hdr_type);
+ dev_err(&dev->dev, "ignoring class %#08x (doesn't match header "
+ "type %02x)\n", dev->class, dev->hdr_type);
dev->class = PCI_CLASS_NOT_DEFINED;
}

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/