Re: [RFC PATCH v2 8/8] [SCSI] sr: check and enable Zero-power ODDsupport

From: Aaron Lu
Date: Mon Mar 12 2012 - 00:54:50 EST


On Mon, Mar 12, 2012 at 10:49:58AM +0800, Lin Ming wrote:
>
> Would you like the draft incremental patch below?
> I have not tested it yet.

Yes, this patch looks good to me, feel free to add my acked-by next time
you post it, thanks.

-Aaron

>
> ---
> drivers/ata/libata-core.c | 3 +++
> drivers/ata/libata-scsi.c | 2 ++
> drivers/scsi/sr.c | 16 +++++++---------
> drivers/scsi/sr.h | 1 -
> include/linux/ata.h | 1 +
> include/linux/libata.h | 2 ++
> include/scsi/scsi_device.h | 1 +
> 7 files changed, 16 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
> index 6742cc4..2a10701 100644
> --- a/drivers/ata/libata-core.c
> +++ b/drivers/ata/libata-core.c
> @@ -2368,6 +2368,9 @@ int ata_dev_configure(struct ata_device *dev)
> dma_dir_string = ", DMADIR";
> }
>
> + if (atapi_id_has_da(dev->id))
> + dev->flags |= ATA_DFLAG_DA;
> +
> /* print device info to dmesg */
> if (ata_msg_drv(ap) && print_info)
> ata_dev_info(dev,
> diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
> index 231c3ec..0bfbe41 100644
> --- a/drivers/ata/libata-scsi.c
> +++ b/drivers/ata/libata-scsi.c
> @@ -3445,6 +3445,8 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync)
> dev->sdev = sdev;
> scsi_device_put(sdev);
> ata_acpi_bind(dev);
> + if (dev->flags & ATA_DFLAG_DA)
> + sdev->power_off = 1;
> } else {
> dev->sdev = NULL;
> }
> diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
> index 7cd0489..0a75613 100644
> --- a/drivers/scsi/sr.c
> +++ b/drivers/scsi/sr.c
> @@ -87,7 +87,7 @@ static int sr_suspend(struct device *dev, pm_message_t mesg)
> struct scsi_cd *cd;
>
> cd = dev_get_drvdata(dev);
> - if (cd->zpodd)
> + if (cd->device->power_off)
> dev->power.subsys_data->can_power_off = true;
>
> return 0;
> @@ -98,7 +98,7 @@ static int sr_resume(struct device *dev)
> struct scsi_cd *cd;
>
> cd = dev_get_drvdata(dev);
> - if (cd->zpodd) {
> + if (cd->device->power_off) {
> dev->power.subsys_data->can_power_off = false;
> cd->zpodd_event = 0;
> }
> @@ -245,7 +245,8 @@ static unsigned int sr_check_events(struct cdrom_device_info *cdi,
> int ret;
>
> /* Not necessary to check events if enter ZPODD state */
> - if (cd->zpodd && pm_runtime_suspended(&cd->device->sdev_gendev))
> + if (cd->device->power_off &&
> + pm_runtime_suspended(&cd->device->sdev_gendev))
> return 0;
>
> /* no changer support */
> @@ -292,7 +293,7 @@ static unsigned int sr_check_events(struct cdrom_device_info *cdi,
> cd->media_present = scsi_status_is_good(ret) ||
> (scsi_sense_valid(&sshdr) && sshdr.asc != 0x3a);
>
> - if (!cd->media_present && cd->zpodd && !cd->zpodd_event) {
> + if (!cd->media_present && cd->device->power_off && !cd->zpodd_event) {
> scsi_autopm_put_device(cd->device);
> cd->zpodd_event = 1;
> }
> @@ -753,11 +754,8 @@ static int sr_probe(struct device *dev)
> disk->flags |= GENHD_FL_REMOVABLE;
> add_disk(disk);
>
> - /* TODO: add device attention bit check for ZPODD */
> - if (device_run_wake(dev)) {
> - cd->zpodd = 1;
> + if (sdev->power_off)
> dev_pm_get_subsys_data(dev);
> - }
>
> sdev_printk(KERN_DEBUG, sdev,
> "Attached scsi CD-ROM %s\n", cd->cdi.name);
> @@ -1015,7 +1013,7 @@ static int sr_remove(struct device *dev)
> kref_put(&cd->kref, sr_kref_release);
> mutex_unlock(&sr_ref_mutex);
>
> - if (cd->zpodd)
> + if (cd->device->power_off)
> dev_pm_put_subsys_data(dev);
>
> return 0;
> diff --git a/drivers/scsi/sr.h b/drivers/scsi/sr.h
> index 39b3d8c..e81da64 100644
> --- a/drivers/scsi/sr.h
> +++ b/drivers/scsi/sr.h
> @@ -42,7 +42,6 @@ typedef struct scsi_cd {
> unsigned readcd_cdda:1; /* reading audio data using READ_CD */
> unsigned media_present:1; /* media is present */
>
> - unsigned zpodd:1; /* is ZPODD supported */
> unsigned zpodd_event:1;
>
> /* GET_EVENT spurious event handling, blk layer guarantees exclusion */
> diff --git a/include/linux/ata.h b/include/linux/ata.h
> index 32df2b6..6ee41cc 100644
> --- a/include/linux/ata.h
> +++ b/include/linux/ata.h
> @@ -578,6 +578,7 @@ static inline int ata_is_data(u8 prot)
> ((u64) (id)[(n) + 0]) )
>
> #define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
> +#define atapi_id_has_da(id) ((id)[77] & (1 << 4))
>
> static inline bool ata_id_has_hipm(const u16 *id)
> {
> diff --git a/include/linux/libata.h b/include/linux/libata.h
> index 36970c6..3085bdc 100644
> --- a/include/linux/libata.h
> +++ b/include/linux/libata.h
> @@ -161,6 +161,8 @@ enum {
> ATA_DFLAG_DETACH = (1 << 24),
> ATA_DFLAG_DETACHED = (1 << 25),
>
> + ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */
> +
> ATA_DEV_UNKNOWN = 0, /* unknown device */
> ATA_DEV_ATA = 1, /* ATA device */
> ATA_DEV_ATA_UNSUP = 2, /* ATA device (unsupported) */
> diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
> index 8b6c247..4805d5a 100644
> --- a/include/scsi/scsi_device.h
> +++ b/include/scsi/scsi_device.h
> @@ -151,6 +151,7 @@ struct scsi_device {
> unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
> unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
> unsigned is_visible:1; /* is the device visible in sysfs */
> + unsigned power_off:1; /* Device supports runtime power off */
>
> DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
> struct list_head event_list; /* asserted events */
>
>
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/