Re: [PATCH] xen/acpi-processor: C and P-state driver thatuploads said data to hypervisor.

[Jan Beulich]

>>> On 10.03.12 at 17:05, Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> wrote:
> [v7: Made it a semi-cpufreq scaling type driver suggested by Jan Beulich 

I don't see any registration or other hooking up that would match this
piece of the description.

> --- a/drivers/xen/Kconfig
> +++ b/drivers/xen/Kconfig
> @@ -178,4 +178,21 @@ config XEN_PRIVCMD
>  	depends on XEN
>  	default m
>  
> +config XEN_ACPI_PROCESSOR
> +	tristate "Xen ACPI processor"
> +	depends on XEN && X86 && ACPI_PROCESSOR
> +	default y if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)
> +	default m if (X86_ACPI_CPUFREQ = m || X86_POWERNOW_K8 = m)

I don't think the code itself has any dependencies on this, and as long
as you interface directly with the "normal" ACPI processor driver there
also shouldn't be any implicit dependency. Is this hence may just a
leftover?

> +	help
> +          This ACPI processor uploads Power Management information to the Xen hypervisor.
> +
> +	  To do that the driver parses the Power Management data and uploads said
> +	  information to the Xen hypervisor. Then the Xen hypervisor can select the
> +          proper Cx and Pxx states. It also registers itslef as the SMM so that
> +          other drivers (such as ACPI cpufreq scaling driver) will not load.
> +
> +          To compile this driver as a module, choose M here: the
> +          module will be called xen_acpi_processor  If you do not know what to choose,
> +          select M here. If the CPUFREQ drivers are built in, select Y here.
> +
>  endmenu
> --- /dev/null
> +++ b/drivers/xen/xen-acpi-processor.c
> +#define NR_ACPI_CPUS	NR_CPUS
> +#define MAX_ACPI_BITS	(BITS_TO_LONGS(NR_ACPI_CPUS))

Rather than arbitrarily limiting this, you could call into Xen at startup
and scan over all CPUs' ACPI IDs to find the maximum. I think that
would even cover statically declared hotplug ones, but adding some
slack may still be necessary to cover dynamic hotplug ones (implying
that pCPU hotplug patches will make it in at some point).

>...
> +static int __init check_acpi_ids(struct acpi_processor *pr_backup)
> +{
> +	if (!pr_backup)
> +		return -ENODEV;
> +
> +	/* All online CPUs have been processed at this stage. Now verify
> +	 * whether in fact "online CPUs" == physical CPUs.
> +	 */
> +	acpi_id_present = kcalloc(MAX_ACPI_BITS, sizeof(unsigned long), GFP_KERNEL);
> +	if (!acpi_id_present)
> +		return -ENOMEM;
> +
> +	memset(acpi_id_present, 0, MAX_ACPI_BITS * sizeof(unsigned long));

kcalloc() already clears the allocated memory.

> +
> +	acpi_id_cst_present = kcalloc(MAX_ACPI_BITS, sizeof(unsigned long), GFP_KERNEL);
> +	if (!acpi_id_cst_present) {
> +		kfree(acpi_id_present);
> +		return -ENOMEM;
> +	}
> +	memset(acpi_id_cst_present, 0, MAX_ACPI_BITS * sizeof(unsigned long));

Same here.

> +
> +	acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
> +			    ACPI_UINT32_MAX,
> +			    read_acpi_id, NULL, NULL, NULL);
> +	acpi_get_devices("ACPI0007", read_acpi_id, NULL, NULL);
> +
> +	if (!bitmap_equal(acpi_id_present, acpi_ids_done, MAX_ACPI_BITS)) {
> +		unsigned int i;
> +
> +		for_each_set_bit(i, acpi_id_present, MAX_ACPI_BITS) {
> +			pr_backup->acpi_id = i;
> +			/* Mask out C-states if there are no _CST */
> +			pr_backup->flags.power = test_bit(i, acpi_id_cst_present);
> +			(void)upload_pm_data(pr_backup);
> +		}
> +	}
> +	kfree(acpi_id_present);
> +	acpi_id_present = NULL;
> +	kfree(acpi_id_cst_present);
> +	acpi_id_cst_present = NULL;
> +	return 0;
> +}
> +static int __init check_prereq(void)
> +{
> +	struct cpuinfo_x86 *c = &cpu_data(0);
> +
> +	if (!xen_initial_domain())
> +		return -ENODEV;
> +
> +	if (!acpi_gbl_FADT.smi_command)
> +		return -ENODEV;
> +
> +	if (c->x86_vendor == X86_VENDOR_INTEL) {
> +		if (!cpu_has(c, X86_FEATURE_EST))
> +			return -ENODEV;
> +
> +		return 0;
> +	}
> +	if (c->x86_vendor == X86_VENDOR_AMD) {
> +		/* Copied from powernow-k8.h, can't include ../xen-acpi-processor/powernow
> +		 * as we get compile warnings for the static functions.
> +		 */

If drivers/cpufreq/powernow-k[78].h are supposed to be useful at all
(which they currently aren't as both get included in just a single place),
those static function declarations should be removed from the latter.

> +#define CPUID_FREQ_VOLT_CAPABILITIES    0x80000007
> +#define USE_HW_PSTATE                   0x00000080
> +		u32 eax, ebx, ecx, edx;
> +		cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
> +		if ((edx & USE_HW_PSTATE) != USE_HW_PSTATE)
> +			return -ENODEV;
> +		return 0;
> +	}
> +	return -ENODEV;
> +}
>...
> +static int __init xen_acpi_processor_init(void)
> +{
> +	struct acpi_processor *pr_backup = NULL;
> +	unsigned int i;
> +	int rc = check_prereq();
> +
> +	if (rc)
> +		return rc;
> +
> +	acpi_ids_done = kcalloc(MAX_ACPI_BITS, sizeof(unsigned long), GFP_KERNEL);
> +	if (!acpi_ids_done)
> +		return -ENOMEM;
> +
> +	memset(acpi_ids_done, 0, MAX_ACPI_BITS * sizeof(unsigned long));

Pointless kcalloc() + memset() again.

> +
> +	acpi_perf_data = alloc_percpu(struct acpi_processor_performance);
> +	if (!acpi_perf_data) {
> +		pr_debug(DRV_NAME "Memory allocation error for acpi_perf_data.\n");
> +		kfree(acpi_ids_done);
> +		return -ENOMEM;
> +	}
> +	for_each_possible_cpu(i) {
> +		if (!zalloc_cpumask_var_node(
> +			&per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map,
> +			GFP_KERNEL, cpu_to_node(i))) {
> +			rc = -ENOMEM;
> +			goto err_out;
> +		}
> +	}
> +
> +	/* Do initialization in ACPI core */
> +	rc = acpi_processor_preregister_performance(acpi_perf_data);
> +	if (WARN_ON(rc))
> +		goto err_out;
> +
> +	for_each_possible_cpu(i) {
> +		struct acpi_processor_performance *perf;
> +
> +		perf = per_cpu_ptr(acpi_perf_data, i);
> +		rc = acpi_processor_register_performance(perf, i);
> +		if (WARN_ON(rc))
> +			goto err_out;
> +	}
> +	rc = acpi_processor_notify_smm(THIS_MODULE);
> +	if (WARN_ON(rc))
> +		goto err_unregister;
> +
> +	for_each_possible_cpu(i) {
> +		struct acpi_processor *_pr;
> +		_pr = per_cpu(processors, i /* APIC ID */);
> +		if (!_pr)
> +			continue;
> +
> +		if (!pr_backup) {
> +			pr_backup = kzalloc(sizeof(struct acpi_processor), GFP_KERNEL);
> +			memcpy(pr_backup, _pr, sizeof(struct acpi_processor));
> +		}
> +		(void)upload_pm_data(_pr);
> +	}
> +	rc = check_acpi_ids(pr_backup);
> +	if (rc)
> +		goto err_unregister;
> +
> +	kfree(pr_backup);
> +	register_hotcpu_notifier(&xen_cpu_notifier);

This is pointless - you'd get notified of vCPU-s arrival/departure only.
Without pCPU hotplug code in place, there's just nothing you can (and
need to) do here.

> +
> +	return 0;
> +err_unregister:
> +	for_each_possible_cpu(i) {
> +		struct acpi_processor_performance *perf;
> +		perf = per_cpu_ptr(acpi_perf_data, i);
> +		acpi_processor_unregister_performance(perf, i);
> +	}
> +err_out:
> +	/* Freeing a NULL pointer is OK: alloc_percpu zeroes. */
> +	free_acpi_perf_data();
> +	kfree(acpi_ids_done);
> +	return rc;
> +}

Overall this version looks a lot better to me than the previous ones.

Jan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/