Re: I.MX35 PDK

[Fabio Estevam]

On 3/12/12, Alex Gershgorin <alexg@xxxxxxxxxxxxxx> wrote:

> 1. Back resistor 172 to the default value.
>
> 2. Removed the resistor 146, through which a voltage was applied from a PMIC
> (EXT_3V) on "CMOS_VIO".
>
> 3. Connecting a resistor 147 which supplies power from the LDO_3V3 on
> "CMOS_VIO".

The camera on the FSL BSP works fine with no hardware modification on
the mx35pdk.

As I suggested previously you should control the power rails, i2c pad
settings, etc from software so that the camera can also work in
mainline without the need of changing the hardware.

> On my display I see snow flickering and unfortunately not a live video from
> camera.

Do you have this patch applied?

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=f910fb8fcd1c97788f2291c8646597bcd87ee061

Also, try to isolate the display from this issue. Capture the image to
a file and try to play it on a PC.

Regards,

Fabio Estevam
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/