Re: [PATCH] Added backlight driver for Acer Aspire 4736

From: joeyli
Date: Thu Mar 15 2012 - 04:07:36 EST


Hi Pradeep,

æ äï2012-03-14 æ 11:47 +0530ïPradeep Subrahmanion æåï
> On Wed, Mar 14, 2012 at 11:21 AM, joeyli <jlee@xxxxxxxx> wrote:
> > æ äï2012-03-14 æ 08:13 +0530ïPradeep Subrahmanion æåï
> >> Hi Joey ,
> >>
> >> > Per my understood, EC firmware should change brightness but didn't do
> >> > that, another
> >> > way is touch i915 register in _BCM.
> >>
> >> how do we do this ? you mean change the _BCM implementation ?
> >
> > "BIOS guy" should do something like this:
> >
> > Method (AINT, 2, NotSerialized)
> > {
> > ...
> > If (LEqual (Arg0, One))
> > {
> > Store (Divide (Multiply (Arg1, 0xFF), 0x64, ), BCLP)
> > Or (BCLP, 0x80000000, BCLP) <=== touch BCLP register
> > Store (0x02, ASLC)
> > }
> >
> > Method (_BCM, 1, NotSerialized)
> > {
> > If (LAnd (LGreaterEqual (Arg0, Zero), LLessEqual (Arg0, 0x64)))
> > {
> > AINT (One, Arg0) <=== call AINT method
> > Store (Arg0, BRTL)
> > }
> > }
> >
> >
> > Just for reference, they should do that when EC didn't wire to
> > backlight.
> >
> >> >
> >> > Acer machine provide a broken _BCM implementation and they didn't test
> >> > it.
> >> >
> >> > > > > By ' ACPI interface' , I mean 'acpi_video0' inside the
> >> > > > > /sys/class/backlight. I havn't tried the /sys/class/backlight interface
> >> > > > > directly . I will try that also.
> >> > > >
> >> > > > So writing values into /sys/class/backlight/acpi_video0/brightness does
> >> > > > nothing?
> >> > >
> >> > >
> >> > > No change in value when writing
> >> > > to /sys/class/backlight/acpi_video0/brightness.
> >> > >
> >> > > Another thing is that when i did boot with acpi_backlight = 'acer_wmi' ,
> >> > > in new kernel (3.3.0-rc7) , it shows following messages ,
> >> > >
> >> > > [ 8.350825] wmi: Mapper loaded
> >> > > [ 10.363975] acer_wmi: Acer Laptop ACPI-WMI Extras
> >> > > [ 10.396186] acer_wmi: Function bitmap for Communication Device: 0x91
> >> > > [ 10.396385] acer_wmi: Brightness must be controlled by generic video
> >> > > driver
> >> > >
> >> > > Also there was no interface inside /sys/class/backlight for acer_wmi.
> >> > >
> >> >
> >> > Yes, acer_wmi support backlight control with AMW0 interface, your
> >> > machine didn't have AMW0 interface.
> >> >
> >> > Normally, backlight should control by standard acpi interface.
> >> >
> >> > > I also tried writing directly to Embedded controller register .But no
> >> > > change.
> >> >
> >> > The machine has broken _BCM method, because EC should do something after
> >> > _BCM changed EC register.
> >>
> >> Thanks ,
> >>
> >> Pradeep Subrahmanion
> >
> > Why they didn't find _BCM not work?
> >
> > My guess is:
> >
> > Because the backlight control is through WDDM driver on Windows platform
> > but not through standard ACPI method _BCM. They only test Windows
> > platform, so, they didn't find _BCM broken.
> >
> > And, they also didn't really follow Microsoft WDDM spec:
> >
> > http://msdn.microsoft.com/en-us/windows/hardware/gg487382.aspx
> >
> > Per spec,
> > ODM should keep _BCM works fine for any other OS didn't support WDDM
> > driver, but they didn't.
> >
> > At last year, I told Acer PM one time for this issue, they said will
> > check but finally didn't response me.
> >
>
> >
> > Thanks
> > Joey Lee
> >
>
> So touching the PCI LBB register is the only feasible solution now
> (even though it may not be a clean method) ?
>
> Thanks,
> Pradeep Subrahmanion

That will be better leave LBB register only touched by i915 driver.

If 'acpi_backlight=vendor' works to you, maybe we can add a quirk to
video_detect.c.
You can try the following patch.


Thanks a lot!
Joey Lee


>From 038bd3c4e53b7195f34e9d46c999b8dcb279da5e Mon Sep 17 00:00:00 2001
From: "Lee, Chun-Yi" <jlee@xxxxxxxx>
Date: Thu, 15 Mar 2012 16:03:45 +0800
Subject: [PATCH] acer-wmi: Add quirk table for video backlight vendor mode

Add quirk table for video backlight vendor mode

Signed-off-by: "Lee, Chun-Yi" <jlee@xxxxxxxx>
---
drivers/acpi/video_detect.c | 27 +++++++++++++++++++++++++++
1 files changed, 27 insertions(+), 0 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index f3f0fe7..acb15d6 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -132,6 +132,32 @@ find_video(acpi_handle handle, u32 lvl, void *context, void **rv)
return AE_OK;
}

+static int video_set_backlight_vendor(const struct dmi_system_id *d)
+{
+ acpi_video_support |= ACPI_VIDEO_BACKLIGHT_DMI_VENDOR;
+ return 0;
+}
+
+static const struct dmi_system_id video_vendor_dmi_table[] = {
+ {
+ .callback = video_set_backlight_vendor,
+ .ident = "Acer Aspire 4736",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 4736"),
+ },
+ },
+ {
+ .callback = video_set_backlight_vendor,
+ .ident = "Acer TravelMate 4750",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4750"),
+ },
+ },
+ {}
+};
+
/*
* Returns the video capabilities of a specific ACPI graphics device
*
@@ -164,6 +190,7 @@ long acpi_video_get_capabilities(acpi_handle graphics_handle)
* ACPI_VIDEO_BACKLIGHT_DMI_VENDOR;
*}
*/
+ dmi_check_system(video_vendor_dmi_table);
} else {
status = acpi_bus_get_device(graphics_handle, &tmp_dev);
if (ACPI_FAILURE(status)) {
--
1.7.7



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/