[PATCH 08/10] ARM: OMAP2+: SmartReflex: Use per-OPP data structure

[jean . pihet]

From: Jean Pihet <j-pihet@xxxxxx>

The SmartReflex driver incorrectly treats some per-OPP data as data
common to all OPPs (e.g., ERRMINLIMIT).  Move this data into a per-OPP
data structure.
The SmartReflex driver should not be dependent on whether the host SoC
uses eFuses to store SmartReflex parameters or not.  (Even SoCs that
do store SR data in eFuses often need to override that data with
software-defined values.)  So, convert sr_retrieve_nvalue() to look up
per-OPP data by the OPP's nominal voltage, rather than by the eFuse
offset.

While at it:
 . tidy up the code wrt default values in the data tables,
 . remove the global errminlimit debugfs entry and create per-voltage
   entries from the data tables.

Furthermore, in order to make the SmartReflex implementation ready for
the move to drivers/, remove the dependency from the SR driver code
to the voltage layer by querying the data tables only from the SR device
init code.

Based on Paul's original code for the SmartReflex driver conversion.

Signed-off-by: Jean Pihet <j-pihet@xxxxxx>
Cc: Paul Walmsley <paul@xxxxxxxxx>
Cc: Thara Gopinath <thara@xxxxxx>
Cc: Nishanth Menon <nm@xxxxxx>
Cc: Kevin Hilman <khilman@xxxxxx>
---
 arch/arm/mach-omap2/smartreflex.c             |   57 ++++++++++--------------
 arch/arm/mach-omap2/sr_device.c               |   35 +++++++++++++---
 arch/arm/plat-omap/include/plat/smartreflex.h |    8 +++-
 3 files changed, 59 insertions(+), 41 deletions(-)

diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index ceb50b5..52950a1 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -348,22 +348,24 @@ static void sr_v2_disable(struct omap_sr *sr)
 	sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
 }
 
-static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs)
+static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row(
+				struct omap_sr *sr,
+				unsigned long volt_nominal)
 {
 	int i;
 
 	if (!sr->nvalue_table) {
 		dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
 			__func__);
-		return 0;
+		return NULL;
 	}
 
 	for (i = 0; i < sr->nvalue_count; i++) {
-		if (sr->nvalue_table[i].efuse_offs == efuse_offs)
-			return sr->nvalue_table[i].nvalue;
+		if (sr->nvalue_table[i].volt_nominal == volt_nominal)
+			return &sr->nvalue_table[i];
 	}
 
-	return 0;
+	return NULL;
 }
 
 /* Public Functions */
@@ -585,9 +587,8 @@ int sr_configure_minmax(struct voltagedomain *voltdm)
  */
 int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 {
-	struct omap_volt_data *volt_data;
 	struct omap_sr *sr = _sr_lookup(voltdm);
-	u32 nvalue_reciprocal;
+	struct omap_sr_nvalue_table *nvalue_row;
 	int ret;
 
 	if (IS_ERR(sr)) {
@@ -595,24 +596,16 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 		return PTR_ERR(sr);
 	}
 
-	volt_data = omap_voltage_get_voltdata(sr->voltdm, volt);
-
-	if (IS_ERR(volt_data)) {
-		dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table"
-			"for nominal voltage %ld\n", __func__, volt);
-		return PTR_ERR(volt_data);
-	}
-
-	nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
-
-	if (!nvalue_reciprocal) {
-		dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n",
-			__func__, volt);
+	nvalue_row = sr_retrieve_nvalue_row(sr, volt);
+	if (!nvalue_row) {
+		dev_warn(&sr->pdev->dev, "%s: failure getting SR data for this voltage %ld\n",
+			 __func__, volt);
 		return -ENODATA;
 	}
 
+
 	/* errminlimit is opp dependent and hence linked to voltage */
-	sr->err_minlimit = volt_data->sr_errminlimit;
+	sr->err_minlimit = nvalue_row->errminlimit;
 
 	pm_runtime_get_sync(&sr->pdev->dev);
 
@@ -625,7 +618,7 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 	if (ret)
 		return ret;
 
-	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
+	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_row->nvalue);
 
 	/* SRCONFIG - enable SR */
 	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
@@ -873,7 +866,6 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 	struct omap_sr_data *pdata = pdev->dev.platform_data;
 	struct resource *mem, *irq;
 	struct dentry *nvalue_dir;
-	struct omap_volt_data *volt_data;
 	int i, ret = 0;
 
 	sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
@@ -980,8 +972,6 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 			&sr_info->err_weight);
 	(void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
 			&sr_info->err_maxlimit);
-	(void) debugfs_create_x32("errminlimit", S_IRUGO, sr_info->dbg_dir,
-			&sr_info->err_minlimit);
 
 	nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
 	if (IS_ERR_OR_NULL(nvalue_dir)) {
@@ -991,12 +981,9 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 		goto err_debugfs;
 	}
 
-	omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
-	if (!volt_data) {
-		dev_warn(&pdev->dev, "%s: %s: No Voltage table for the"
-			" corresponding vdd. Cannot create debugfs"
-			"entries for n-values\n",
-			__func__, sr_info->name);
+	if (sr_info->nvalue_count == 0 || !sr_info->nvalue_table) {
+		dev_warn(&pdev->dev, "%s: %s: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values\n",
+			 __func__, sr_info->name);
 		ret = -ENODATA;
 		goto err_debugfs;
 	}
@@ -1004,10 +991,14 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 	for (i = 0; i < sr_info->nvalue_count; i++) {
 		char name[NVALUE_NAME_LEN + 1];
 
-		snprintf(name, sizeof(name), "volt_%d",
-			 volt_data[i].volt_nominal);
+		snprintf(name, sizeof(name), "volt_%lu",
+			 sr_info->nvalue_table[i].volt_nominal);
 		(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
 				&(sr_info->nvalue_table[i].nvalue));
+		snprintf(name, sizeof(name), "errminlimit_%lu",
+			 sr_info->nvalue_table[i].volt_nominal);
+		(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
+				&(sr_info->nvalue_table[i].errminlimit));
 	}
 
 	return ret;
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 2c74ebc..e1382a6 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -36,7 +36,10 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				struct omap_sr_data *sr_data)
 {
 	struct omap_sr_nvalue_table *nvalue_table;
-	int i, count = 0;
+	int i, j, count = 0;
+
+	sr_data->nvalue_count = 0;
+	sr_data->nvalue_table = NULL;
 
 	while (volt_data[count].volt_nominal)
 		count++;
@@ -44,8 +47,14 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 	nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count,
 			GFP_KERNEL);
 
-	for (i = 0; i < count; i++) {
+	if (!nvalue_table) {
+		pr_err("OMAP: SmartReflex: cannot allocate memory for n-value table\n");
+		return;
+	}
+
+	for (i = 0, j = 0; i < count; i++) {
 		u32 v;
+
 		/*
 		 * In OMAP4 the efuse registers are 24 bit aligned.
 		 * A __raw_readl will fail for non-32 bit aligned address
@@ -58,15 +67,29 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				omap_ctrl_readb(offset + 1) << 8 |
 				omap_ctrl_readb(offset + 2) << 16;
 		} else {
-			 v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
+			v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
 		}
 
-		nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs;
-		nvalue_table[i].nvalue = v;
+		/*
+		 * Many OMAP SoCs don't have the eFuse values set.
+		 * For example, pretty much all OMAP3xxx before
+		 * ES3.something.
+		 *
+		 * XXX There needs to be some way for board files or
+		 * userspace to add these in.
+		 */
+		if (v == 0)
+			continue;
+
+		nvalue_table[j].nvalue = v;
+		nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit;
+		nvalue_table[j].volt_nominal = volt_data[i].volt_nominal;
+
+		j++;
 	}
 
 	sr_data->nvalue_table = nvalue_table;
-	sr_data->nvalue_count = count;
+	sr_data->nvalue_count = j;
 }
 
 static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
diff --git a/arch/arm/plat-omap/include/plat/smartreflex.h b/arch/arm/plat-omap/include/plat/smartreflex.h
index 7bfc91a..017d36f 100644
--- a/arch/arm/plat-omap/include/plat/smartreflex.h
+++ b/arch/arm/plat-omap/include/plat/smartreflex.h
@@ -46,12 +46,16 @@ struct omap_sr {
 /**
  * struct omap_sr_nvalue_table	- Smartreflex n-target value info
  *
- * @efuse_offs:	The offset of the efuse where n-target values are stored.
- * @nvalue:	The n-target value.
+ * @efuse_offs:	  The offset of the efuse where n-target values are stored.
+ * @nvalue:	  The n-target value.
+ * @errminlimit:  The value of the ERRMINLIMIT bitfield for this n-target
+ * @volt_nominal: microvolts DC that the VDD is initially programmed to
  */
 struct omap_sr_nvalue_table {
 	u32 efuse_offs;
 	u32 nvalue;
+	u32 errminlimit;
+	unsigned long volt_nominal;
 };
 
 /**
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/