Re: Re: [PATCH v4 0/7] Add TI EMIF SDRAM controller driver

[함명주]

Kyungmin Park<kmpark@xxxxxxxxxxxxx> 2012-03-17 15:10 (GMT+09:00)
> Hi,
> On 3/17/12, Aneesh V wrote:
> > Add a driver for the EMIF SDRAM controller used in TI SoCs
> >
> > EMIF is an SDRAM controller that supports, based on its revision,
> > one or more of LPDDR2/DDR2/DDR3 protocols.This driver adds support
> > for LPDDR2.
> >
> > The driver supports the following features:
> > - Calculates the DDR AC timing parameters to be set in EMIF
> >   registers using data from the device data-sheets and based
> >   on the DDR frequency. If data from data-sheets is not available
> >   default timing values from the JEDEC spec are used. These
> >   will be safe, but not necessarily optimal
> > - API for changing timings during DVFS or at boot-up

This means that you alreeady have callbacks to create a devfreq device driver that supports DVFS on the device. This doesn't need to be a misc device driver then.

> > - Temperature alert configuration and handling of temperature
> >   alerts, if any for LPDDR2 devices
> >   * temperature alert is based on periodic polling of MR4 mode
> >     register in DDR devices automatically performed by hardware
> >   * timings are de-rated and brought back to nominal when
> >     temperature raises and falls respectively

This can be a feature overriding "max_freq" inside the Omap EMIF devfreq device driver though it maybe (or not.. I just don't sure) be better to use thermal framework as well.


Cheers!
MyungJoo

> > - Cache of calculated register values to avoid re-calculating
> >   them
> >
> > The driver will need some minor updates when it is eventually
> > integrated with Dynamic Voltage and Frequency Scaling (DVFS).
> > This can not be done now as DVFS support is not available in
> > the mainline yet.
> Do you see the devfreq? it's designed for non-cpu device frequency.
> It's role is similar with cpufreq.
> 
> Now samsung exynos uses devfreq for DRAM bus frequency.
> 
> Thank you,
> Kyungmin Park
> >
> > Discussions with Santosh Shilimkar 
> > were immensely helpful in shaping up the interfaces. Vibhore Vardhan
> > did the initial code snippet for thermal
> > handling.
> >
> > Testing:
> > - The driver is tested on OMAP4430 SDP.
> > - The driver in a slightly adapted form is also tested on OMAP5.
> > - Since mainline kernel doesn't have DVFS support yet,
> >   testing was done using a test module.
> > - Temperature alert handling was tested with simulated interrupts
> >   and faked temperature values as testing all cases in real-life
> >   scenarios is difficult.
> > - Tested the driver as a module
> >
> > Cc: Greg KH 
> >
> > v4:
> > - Converted instances of EXPORT_SYMBOL to EXPORT_SYMBOL_GPL
> > - Removed un-necessary "#ifndef __ASSEMBLY__'
> > - Minor formatting fix
> >
> > v2:
> > - Fixed a bug found in the implementation of errata i728
> >   workaround
> > - Fixed the value of frequency printed in debugfs
> > - Dropped the hwmod patch as Paul has already posted a
> >   a hwmod series [1] that adds hwmod for EMIF
> > - Converted instances of __init to __init_or_module
> >
> > [1] http://thread.gmane.org/gmane.linux.ports.arm.omap/72855
> >
> > Aneesh V (7):
> >   misc: ddr: add LPDDR2 data from JESD209-2
> >   misc: emif: add register definitions for EMIF
> >   misc: emif: add basic infrastructure for EMIF driver
> >   misc: emif: handle frequency and voltage change events
> >   misc: emif: add interrupt and temperature handling
> >   misc: emif: add one-time settings
> >   misc: emif: add debugfs entries for emif
> >
> >  Documentation/misc-devices/ti-emif.txt  |   58 ++
> >  drivers/misc/Kconfig                    |   12 +
> >  drivers/misc/Makefile                   |    1 +
> >  drivers/misc/emif.c                     | 1670
> > +++++++++++++++++++++++++++++++
> >  drivers/misc/emif.h                     |  589 +++++++++++
> >  include/linux/platform_data/emif_plat.h |  128 +++
> >  include/misc/jedec_ddr.h                |  175 ++++
> >  lib/Kconfig                             |    8 +
> >  lib/Makefile                            |    2 +
> >  lib/jedec_ddr_data.c                    |  135 +++
> >  10 files changed, 2778 insertions(+), 0 deletions(-)
> >  create mode 100644 Documentation/misc-devices/ti-emif.txt
> >  create mode 100644 drivers/misc/emif.c
> >  create mode 100644 drivers/misc/emif.h
> >  create mode 100644 include/linux/platform_data/emif_plat.h
> >  create mode 100644 include/misc/jedec_ddr.h
> >  create mode 100644 lib/jedec_ddr_data.c
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> >
> 

--
MyungJoo Ham (함명주), PHD
System S/W Lab, S/W Platform Team, Software Center
Samsung Electronics
Cell: +82-10-6714-2858



 

?移ťŽ&Ţ~ş&śŹ–+-깁負ĽŠwŽ왢쎉喝méb욎dz받–)í끾čw*jgП¨ś‰šŽ듶˘j/곴äz받–듺2듷솳鈺Ú&˘)傘Ťa뛴ŽGŤ앶hŽćj:+v돣Šwč녪Ľ>W슧違iŰaxPjŘmśŸ˙Ă-ť+껠dš_