Re: [PATCH] ARM: i.MX35: Add set_rate and round_rate calls to csi_clk

[Sascha Hauer]

On Tue, Mar 20, 2012 at 12:29:52PM +0200, Alex Gershgorin wrote:
> This patch add set_rate and round_rate calls to csi_clk. This is needed
> to give mx3-camera control over master clock rate to camera.

The file you are patching is scheduled for removal in favour for the
common clock framework, so you are flogging a dead horse here. I suggest
that you wait some time until I finished the i.MX35 patches for this.

> +static int csi_set_rate(struct clk *clk, unsigned long rate)
> +{
> +	unsigned long div;
> +	unsigned long parent_rate;
> +	unsigned long pdr2 = __raw_readl(CCM_BASE + CCM_PDR2);
> +
> +	if (pdr2 & (1 << 7))
> +		parent_rate = get_rate_arm();
> +	else
> +		parent_rate = get_rate_ppll();
> +
> +	div = parent_rate / rate;
> +
> +	/* Set clock divider */
> +	pdr2 |= ((div - 1) & 0x3f) << 16;

btw you forget to clear the divider bits in pdr2 before
setting the new values.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/