[tip:x86/urgent] x86/io_apic: Move and reenable irq only when CONFIG_GENERIC_PENDING_IRQ=y

From: tip-bot for Alexander Gordeev
Date: Fri Mar 23 2012 - 15:46:35 EST


Commit-ID: 4da7072ad6831a35a11341097ce477e18651bedd
Gitweb: http://git.kernel.org/tip/4da7072ad6831a35a11341097ce477e18651bedd
Author: Alexander Gordeev <agordeev@xxxxxxxxxx>
AuthorDate: Tue, 20 Mar 2012 15:19:36 +0100
Committer: Ingo Molnar <mingo@xxxxxxxxxx>
CommitDate: Fri, 23 Mar 2012 13:47:25 +0100

x86/io_apic: Move and reenable irq only when CONFIG_GENERIC_PENDING_IRQ=y

This patch removes dead code from certain .config variations.

When CONFIG_GENERIC_PENDING_IRQ=n irq move and reenable code is
never get executed, nor do_unmask_irq variable updates its init
value. Move the code under CONFIG_GENERIC_PENDING_IRQ macro.

Signed-off-by: Alexander Gordeev <agordeev@xxxxxxxxxx>
Link: http://lkml.kernel.org/r/20120320141935.GA24806@xxxxxxxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
---
arch/x86/kernel/apic/io_apic.c | 101 ++++++++++++++++++++++++----------------
1 files changed, 61 insertions(+), 40 deletions(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 6d10a66..2c428c5 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2512,21 +2512,73 @@ static void ack_apic_edge(struct irq_data *data)

atomic_t irq_mis_count;

-static void ack_apic_level(struct irq_data *data)
-{
- struct irq_cfg *cfg = data->chip_data;
- int i, do_unmask_irq = 0, irq = data->irq;
- unsigned long v;
-
- irq_complete_move(cfg);
#ifdef CONFIG_GENERIC_PENDING_IRQ
+static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg)
+{
/* If we are moving the irq we need to mask it */
if (unlikely(irqd_is_setaffinity_pending(data))) {
- do_unmask_irq = 1;
mask_ioapic(cfg);
+ return true;
}
+ return false;
+}
+
+static inline void ioapic_irqd_unmask(struct irq_data *data,
+ struct irq_cfg *cfg, bool masked)
+{
+ if (unlikely(masked)) {
+ /* Only migrate the irq if the ack has been received.
+ *
+ * On rare occasions the broadcast level triggered ack gets
+ * delayed going to ioapics, and if we reprogram the
+ * vector while Remote IRR is still set the irq will never
+ * fire again.
+ *
+ * To prevent this scenario we read the Remote IRR bit
+ * of the ioapic. This has two effects.
+ * - On any sane system the read of the ioapic will
+ * flush writes (and acks) going to the ioapic from
+ * this cpu.
+ * - We get to see if the ACK has actually been delivered.
+ *
+ * Based on failed experiments of reprogramming the
+ * ioapic entry from outside of irq context starting
+ * with masking the ioapic entry and then polling until
+ * Remote IRR was clear before reprogramming the
+ * ioapic I don't trust the Remote IRR bit to be
+ * completey accurate.
+ *
+ * However there appears to be no other way to plug
+ * this race, so if the Remote IRR bit is not
+ * accurate and is causing problems then it is a hardware bug
+ * and you can go talk to the chipset vendor about it.
+ */
+ if (!io_apic_level_ack_pending(cfg))
+ irq_move_masked_irq(data);
+ unmask_ioapic(cfg);
+ }
+}
+#else
+static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg)
+{
+ return false;
+}
+static inline void ioapic_irqd_unmask(struct irq_data *data,
+ struct irq_cfg *cfg, bool masked)
+{
+}
#endif

+static void ack_apic_level(struct irq_data *data)
+{
+ struct irq_cfg *cfg = data->chip_data;
+ int i, irq = data->irq;
+ unsigned long v;
+ bool masked;
+
+ irq_complete_move(cfg);
+ masked = ioapic_irqd_mask(data, cfg);
+
/*
* It appears there is an erratum which affects at least version 0x11
* of I/O APIC (that's the 82093AA and cores integrated into various
@@ -2581,38 +2633,7 @@ static void ack_apic_level(struct irq_data *data)
eoi_ioapic_irq(irq, cfg);
}

- /* Now we can move and renable the irq */
- if (unlikely(do_unmask_irq)) {
- /* Only migrate the irq if the ack has been received.
- *
- * On rare occasions the broadcast level triggered ack gets
- * delayed going to ioapics, and if we reprogram the
- * vector while Remote IRR is still set the irq will never
- * fire again.
- *
- * To prevent this scenario we read the Remote IRR bit
- * of the ioapic. This has two effects.
- * - On any sane system the read of the ioapic will
- * flush writes (and acks) going to the ioapic from
- * this cpu.
- * - We get to see if the ACK has actually been delivered.
- *
- * Based on failed experiments of reprogramming the
- * ioapic entry from outside of irq context starting
- * with masking the ioapic entry and then polling until
- * Remote IRR was clear before reprogramming the
- * ioapic I don't trust the Remote IRR bit to be
- * completey accurate.
- *
- * However there appears to be no other way to plug
- * this race, so if the Remote IRR bit is not
- * accurate and is causing problems then it is a hardware bug
- * and you can go talk to the chipset vendor about it.
- */
- if (!io_apic_level_ack_pending(cfg))
- irq_move_masked_irq(data);
- unmask_ioapic(cfg);
- }
+ ioapic_irqd_unmask(data, cfg, masked);
}

#ifdef CONFIG_IRQ_REMAP
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/