Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port MultiplierSil3726

From: ANEZAKI, Akira
Date: Wed Mar 28 2012 - 01:29:46 EST

Next message: Yanmin Zhang: "Re: [PATCH] x86_fixup_irqs: Fix possible missing interrupt handlewhen disabling CPU"
Previous message: Paul Mundt: "Re: [PATCH 1/2] dma: shdma: fix runtime PM: clear channel buffers on reset"
In reply to: ANEZAKI, Akira: "Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port MultiplierSil3726"
Next in thread: Gwendal Grignou: "Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA PortMultiplier Sil3726"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hello Gwendal,

(2012/03/27 20:17), Gwendal Grignou wrote:
> Regarding the machine with 10 disks, I see that all the drives have
> been found; I don't see any other error from the /var/log/messages
> snippet that could explain md not finding the volumes.

I have attached 11 disks log. RAID1 is not assembled. Both of md1 and
md2 were not assembled. md1 is root partition.

Best Regards,
Akira

--- 3.2.10 2pmp power cycle error on root ---
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.2.10-3.fc16.i686.PAE (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 15 20:37:01 UTC 2012
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
> [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
> [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000bffbe000 - 00000000bfff0000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] DMI present.
> [ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7360/MS-7360, BIOS V1.AB2 05/28/2007
> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> [ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x1000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-CFFFF write-protect
> [ 0.000000] D0000-DFFFF uncachable
> [ 0.000000] E0000-EFFFF write-through
> [ 0.000000] F0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask F80000000 write-back
> [ 0.000000] 1 base 080000000 mask FC0000000 write-back
> [ 0.000000] 2 disabled
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] found SMP MP-table at [c00ff780] ff780
> [ 0.000000] initial memory mapped : 0 - 01200000
> [ 0.000000] Base memory trampoline at [c0097000] 97000 size 16384
> [ 0.000000] init_memory_mapping: 0000000000000000-00000000375fe000
> [ 0.000000] 0000000000 - 0000200000 page 4k
> [ 0.000000] 0000200000 - 0037400000 page 2M
> [ 0.000000] 0037400000 - 00375fe000 page 4k
> [ 0.000000] kernel direct mapping tables up to 375fe000 @ 11f8000-1200000
> [ 0.000000] RAMDISK: 37081000 - 37ff0000
> [ 0.000000] Allocated new RAMDISK: 36112000 - 37080e5b
> [ 0.000000] Move RAMDISK from 0000000037081000 - 0000000037fefe5a to 36112000 - 37080e5a
> [ 0.000000] ACPI: RSDP 000f95c0 00014 (v00 ACPIAM)
> [ 0.000000] ACPI: RSDT bffb0000 00044 (v01 Mouse Computer 20070528 MSFT 00000097)
> [ 0.000000] ACPI: FACP bffb0200 00084 (v01 052807 FACP1414 20070528 MSFT 00000097)
> [ 0.000000] ACPI: DSDT bffb05c0 05564 (v01 0AAAA 0AAAA000 00000000 INTL 20051117)
> [ 0.000000] ACPI: FACS bffbe000 00040
> [ 0.000000] ACPI: APIC bffb0390 0006C (v01 052807 APIC1414 20070528 MSFT 00000097)
> [ 0.000000] ACPI: MCFG bffb0400 0003C (v01 052807 OEMMCFG 20070528 MSFT 00000097)
> [ 0.000000] ACPI: SLIC bffb0440 00176 (v01 Mouse Computer 20070528 MSFT 00000097)
> [ 0.000000] ACPI: SLIC bffb0440 00176 (v01 Mouse Computer 20070528 MSFT 00000097)
> [ 0.000000] ACPI: OEMB bffbe040 00071 (v01 052807 OEMB1414 20070528 MSFT 00000097)
> [ 0.000000] ACPI: GSCI bffbe0c0 02024 (v01 052807 GMCHSCI 20070528 MSFT 00000097)
> [ 0.000000] ACPI: SSDT bffc1330 0082F (v01 DpgPmm CpuPm 00000012 INTL 20051117)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] 2185MB HIGHMEM available.
> [ 0.000000] 885MB LOWMEM available.
> [ 0.000000] mapped low ram: 0 - 375fe000
> [ 0.000000] low ram: 0 - 375fe000
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] Normal 0x00001000 -> 0x000375fe
> [ 0.000000] HighMem 0x000375fe -> 0x000bffb0
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000010 -> 0x0000009b
> [ 0.000000] 0: 0x00000100 -> 0x000bffb0
> [ 0.000000] On node 0 totalpages: 786235
> [ 0.000000] free_area_init_node: node 0, pgdat c0bb3bc0, node_mem_map f4912200
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 3947 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1740 pages used for memmap
> [ 0.000000] Normal zone: 220978 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 4372 pages used for memmap
> [ 0.000000] HighMem zone: 555166 pages, LIFO batch:31
> [ 0.000000] Using APIC driver default
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
> [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
> [ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7200000 s34240 r0 d23104 u524288
> [ 0.000000] pcpu-alloc: s34240 r0 d23104 u524288 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780091
> [ 0.000000] Kernel command line: ro root=UUID=773cb4b3-4bb0-4705-b494-08cb9c2b5d73 LANG=ja_JP.UTF-8 KEYBOARDTYPE=pc KEYTABLE=jp106 rhgb quiet nomodeset
> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] Initializing CPU#0
> [ 0.000000] allocated 12581376 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] Initializing HighMem for node 0 (000375fe:000bffb0)
> [ 0.000000] Memory: 3081612k/3145408k available (5404k kernel code, 63328k reserved, 2569k data, 644k init, 2238152k highmem)
> [ 0.000000] virtual kernel memory layout:
> [ 0.000000] fixmap : 0xffa95000 - 0xfffff000 (5544 kB)
> [ 0.000000] pkmap : 0xff600000 - 0xff800000 (2048 kB)
> [ 0.000000] vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
> [ 0.000000] .init : 0xc0bca000 - 0xc0c6b000 ( 644 kB)
> [ 0.000000] .data : 0xc094723f - 0xc0bc9980 (2569 kB)
> [ 0.000000] .text : 0xc0400000 - 0xc094723f (5404 kB)
> [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
> [ 0.000000] CPU 0 irqstacks, hard=f380a000 soft=f380c000
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] Fast TSC calibration failed
> [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
> [ 0.000000] Detected 2402.370 MHz processor.
> [ 0.002001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4804.74 BogoMIPS (lpj=2402370)
> [ 0.002005] pid_max: default: 32768 minimum: 301
> [ 0.002025] Security Framework initialized
> [ 0.002032] SELinux: Initializing.
> [ 0.002040] SELinux: Starting in permissive mode
> [ 0.002087] Mount-cache hash table entries: 512
> [ 0.002210] Initializing cgroup subsys cpuacct
> [ 0.002215] Initializing cgroup subsys memory
> [ 0.002222] Initializing cgroup subsys devices
> [ 0.002224] Initializing cgroup subsys freezer
> [ 0.002226] Initializing cgroup subsys net_cls
> [ 0.002228] Initializing cgroup subsys blkio
> [ 0.002233] Initializing cgroup subsys perf_event
> [ 0.002255] CPU: Physical Processor ID: 0
> [ 0.002256] CPU: Processor Core ID: 0
> [ 0.002259] mce: CPU supports 6 MCE banks
> [ 0.002266] CPU0: Thermal monitoring enabled (TM2)
> [ 0.002268] using mwait in idle threads.
> [ 0.003853] ACPI: Core revision 20110623
> [ 0.007009] ftrace: allocating 22484 entries in 45 pages
> [ 0.008042] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.008385] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.018812] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
> [ 0.018998] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
> [ 0.018998] PEBS disabled due to CPU errata.
> [ 0.018998] ... version: 2
> [ 0.018998] ... bit width: 40
> [ 0.018998] ... generic registers: 2
> [ 0.018998] ... value mask: 000000ffffffffff
> [ 0.018998] ... max period: 000000007fffffff
> [ 0.018998] ... fixed-purpose events: 3
> [ 0.018998] ... event mask: 0000000700000003
> [ 0.018998] NMI watchdog enabled, takes one hw-pmu counter.
> [ 0.018998] CPU 1 irqstacks, hard=f3902000 soft=f3904000
> [ 0.018998] Booting Node 0, Processors #1
> [ 0.018998] smpboot cpu 1: start_ip = 97000
> [ 0.002999] Initializing CPU#1
> [ 0.090020] NMI watchdog enabled, takes one hw-pmu counter.
> [ 0.090116] CPU 2 irqstacks, hard=f3930000 soft=f3932000
> [ 0.090118] #2
> [ 0.090119] smpboot cpu 2: start_ip = 97000
> [ 0.002999] Initializing CPU#2
> [ 0.162002] NMI watchdog enabled, takes one hw-pmu counter.
> [ 0.162084] CPU 3 irqstacks, hard=f393e000 soft=f3948000
> [ 0.162086] #3 Ok.
> [ 0.162087] smpboot cpu 3: start_ip = 97000
> [ 0.002999] Initializing CPU#3
> [ 0.233992] NMI watchdog enabled, takes one hw-pmu counter.
> [ 0.234016] Brought up 4 CPUs
> [ 0.234019] Total of 4 processors activated (19216.44 BogoMIPS).
> [ 0.235092] devtmpfs: initialized
> [ 0.235211] PM: Registering ACPI NVS region at bffbe000 (204800 bytes)
> [ 0.236847] atomic64 test passed for i586+ platform with CX8 and with SSE
> [ 0.236872] RTC time: 18:51:35, date: 03/26/12
> [ 0.236905] NET: Registered protocol family 16
> [ 0.237081] ACPI: bus type pci registered
> [ 0.237141] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.237144] PCI: not using MMCONFIG
> [ 0.237231] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
> [ 0.237289] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
> [ 0.237290] PCI: Using configuration type 1 for base access
> [ 0.238391] bio: create slab <bio-0> at 0
> [ 0.238391] ACPI: Added _OSI(Module Device)
> [ 0.238391] ACPI: Added _OSI(Processor Device)
> [ 0.238391] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.238391] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.239491] ACPI: EC: Detected MSI hardware, enabling workarounds.
> [ 0.239497] ACPI: EC: Look up EC in DSDT
> [ 0.240586] ACPI: Executed 1 blocks of module-level executable AML code
> [ 0.243093] ACPI: SSDT bffc00f0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
> [ 0.243315] ACPI: Dynamic OEM Table Load:
> [ 0.243318] ACPI: SSDT (null) 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
> [ 0.243555] ACPI: SSDT bffc0580 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
> [ 0.243776] ACPI: Dynamic OEM Table Load:
> [ 0.243779] ACPI: SSDT (null) 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
> [ 0.244019] ACPI: SSDT bffc0a10 00277 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
> [ 0.244242] ACPI: Dynamic OEM Table Load:
> [ 0.244245] ACPI: SSDT (null) 00277 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
> [ 0.244478] ACPI: SSDT bffc0ea0 00277 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
> [ 0.244704] ACPI: Dynamic OEM Table Load:
> [ 0.244707] ACPI: SSDT (null) 00277 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
> [ 0.244925] ACPI: Interpreter enabled
> [ 0.244945] ACPI: (supports S0 S3 S4 S5)
> [ 0.244962] ACPI: Using IOAPIC for interrupt routing
> [ 0.244986] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.245998] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
> [ 0.246000] PCI: Using MMCONFIG for extended config space
> [ 0.251283] ACPI: No dock devices found.
> [ 0.251285] HEST: Table not found.
> [ 0.251290] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
> [ 0.251452] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.251617] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
> [ 0.251620] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
> [ 0.251623] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
> [ 0.251625] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
> [ 0.251627] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
> [ 0.251629] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] (ignored)
> [ 0.251639] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
> [ 0.251680] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
> [ 0.251719] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [ 0.251722] pci 0000:00:01.0: PME# disabled
> [ 0.251757] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
> [ 0.251797] pci 0000:00:1a.0: reg 20: [io 0x9c00-0x9c1f]
> [ 0.251844] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
> [ 0.251884] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
> [ 0.251940] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
> [ 0.251960] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
> [ 0.252049] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> [ 0.252054] pci 0000:00:1a.7: PME# disabled
> [ 0.252076] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
> [ 0.252090] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
> [ 0.252152] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.252156] pci 0000:00:1b.0: PME# disabled
> [ 0.252174] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
> [ 0.252238] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.252241] pci 0000:00:1c.0: PME# disabled
> [ 0.252261] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
> [ 0.252325] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.252328] pci 0000:00:1c.1: PME# disabled
> [ 0.252348] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
> [ 0.252412] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [ 0.252416] pci 0000:00:1c.2: PME# disabled
> [ 0.252436] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
> [ 0.252500] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 0.252503] pci 0000:00:1c.4: PME# disabled
> [ 0.252523] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
> [ 0.252587] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
> [ 0.252590] pci 0000:00:1c.5: PME# disabled
> [ 0.252611] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
> [ 0.252651] pci 0000:00:1d.0: reg 20: [io 0x9800-0x981f]
> [ 0.252698] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
> [ 0.252737] pci 0000:00:1d.1: reg 20: [io 0x9480-0x949f]
> [ 0.252786] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
> [ 0.252826] pci 0000:00:1d.2: reg 20: [io 0x9400-0x941f]
> [ 0.252873] pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
> [ 0.252912] pci 0000:00:1d.3: reg 20: [io 0x9080-0x909f]
> [ 0.252967] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
> [ 0.252991] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
> [ 0.253075] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.253079] pci 0000:00:1d.7: PME# disabled
> [ 0.253096] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
> [ 0.253154] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
> [ 0.253230] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
> [ 0.253275] pci 0000:00:1f.2: [8086:2921] type 0 class 0x000101
> [ 0.253289] pci 0000:00:1f.2: reg 10: [io 0x9000-0x9007]
> [ 0.253296] pci 0000:00:1f.2: reg 14: [io 0x8c00-0x8c03]
> [ 0.253304] pci 0000:00:1f.2: reg 18: [io 0x8880-0x8887]
> [ 0.253311] pci 0000:00:1f.2: reg 1c: [io 0x8800-0x8803]
> [ 0.253318] pci 0000:00:1f.2: reg 20: [io 0x8480-0x848f]
> [ 0.253325] pci 0000:00:1f.2: reg 24: [io 0x8400-0x840f]
> [ 0.253368] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
> [ 0.253382] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
> [ 0.253402] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
> [ 0.253432] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
> [ 0.253446] pci 0000:00:1f.5: reg 10: [io 0x8000-0x8007]
> [ 0.253454] pci 0000:00:1f.5: reg 14: [io 0x7c00-0x7c03]
> [ 0.253461] pci 0000:00:1f.5: reg 18: [io 0x7880-0x7887]
> [ 0.253469] pci 0000:00:1f.5: reg 1c: [io 0x7800-0x7803]
> [ 0.253476] pci 0000:00:1f.5: reg 20: [io 0x7480-0x748f]
> [ 0.253483] pci 0000:00:1f.5: reg 24: [io 0x7400-0x740f]
> [ 0.253556] pci 0000:01:00.0: [10de:0615] type 0 class 0x000300
> [ 0.253566] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
> [ 0.253576] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.253587] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
> [ 0.253594] pci 0000:01:00.0: reg 24: [io 0xac00-0xac7f]
> [ 0.253601] pci 0000:01:00.0: reg 30: [mem 0xfe7e0000-0xfe7fffff pref]
> [ 0.253652] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [ 0.253655] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
> [ 0.253658] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe7fffff]
> [ 0.253662] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.253698] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
> [ 0.253762] pci 0000:03:00.0: [1095:3132] type 0 class 0x000180
> [ 0.253787] pci 0000:03:00.0: reg 10: [mem 0xfe8ffc00-0xfe8ffc7f 64bit]
> [ 0.253807] pci 0000:03:00.0: reg 18: [mem 0xfe8f8000-0xfe8fbfff 64bit]
> [ 0.253821] pci 0000:03:00.0: reg 20: [io 0xbc00-0xbc7f]
> [ 0.253846] pci 0000:03:00.0: reg 30: [mem 0xfe800000-0xfe87ffff pref]
> [ 0.253910] pci 0000:03:00.0: supports D1 D2
> [ 0.253931] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.253935] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
> [ 0.253939] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
> [ 0.253942] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
> [ 0.254007] pci 0000:04:00.0: [1095:3132] type 0 class 0x000180
> [ 0.254033] pci 0000:04:00.0: reg 10: [mem 0xfe9ffc00-0xfe9ffc7f 64bit]
> [ 0.254054] pci 0000:04:00.0: reg 18: [mem 0xfe9f8000-0xfe9fbfff 64bit]
> [ 0.254067] pci 0000:04:00.0: reg 20: [io 0xcc00-0xcc7f]
> [ 0.254093] pci 0000:04:00.0: reg 30: [mem 0xfe900000-0xfe97ffff pref]
> [ 0.254157] pci 0000:04:00.0: supports D1 D2
> [ 0.254177] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.254182] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
> [ 0.254185] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
> [ 0.254189] pci 0000:00:1c.2: bridge window [mem 0xfe900000-0xfe9fffff]
> [ 0.254245] pci 0000:05:00.0: [11ab:6121] type 0 class 0x000101
> [ 0.254260] pci 0000:05:00.0: reg 10: [io 0xdc00-0xdc07]
> [ 0.254272] pci 0000:05:00.0: reg 14: [io 0xd880-0xd883]
> [ 0.254283] pci 0000:05:00.0: reg 18: [io 0xd800-0xd807]
> [ 0.254295] pci 0000:05:00.0: reg 1c: [io 0xd480-0xd483]
> [ 0.254306] pci 0000:05:00.0: reg 20: [io 0xd400-0xd40f]
> [ 0.254317] pci 0000:05:00.0: reg 24: [mem 0xfeaffc00-0xfeafffff]
> [ 0.254379] pci 0000:05:00.0: supports D1
> [ 0.254381] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
> [ 0.254386] pci 0000:05:00.0: PME# disabled
> [ 0.254402] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.254406] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
> [ 0.254410] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
> [ 0.254414] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
> [ 0.254475] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
> [ 0.254493] pci 0000:06:00.0: reg 10: [io 0xe800-0xe8ff]
> [ 0.254523] pci 0000:06:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
> [ 0.254558] pci 0000:06:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
> [ 0.254635] pci 0000:06:00.0: supports D1 D2
> [ 0.254637] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
> [ 0.254642] pci 0000:06:00.0: PME# disabled
> [ 0.254664] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.254668] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
> [ 0.254672] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
> [ 0.254676] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
> [ 0.254735] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
> [ 0.254744] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
> [ 0.254747] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
> [ 0.254772] pci_bus 0000:00: on NUMA node 0
> [ 0.254775] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.254920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> [ 0.255028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
> [ 0.255069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
> [ 0.255110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
> [ 0.255153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
> [ 0.255193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
> [ 0.255323] pci0000:00: Requesting ACPI _OSC control (0x1d)
> [ 0.255478] pci0000:00: ACPI _OSC control (0x1d) granted
> [ 0.264124] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
> [ 0.264168] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
> [ 0.264208] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
> [ 0.264250] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
> [ 0.264292] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
> [ 0.264337] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
> [ 0.264379] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
> [ 0.264421] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
> [ 0.264500] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.264500] vgaarb: loaded
> [ 0.264500] vgaarb: bridge control possible 0000:01:00.0
> [ 0.264500] SCSI subsystem initialized
> [ 0.264517] libata version 3.00 loaded.
> [ 0.264517] usbcore: registered new interface driver usbfs
> [ 0.264517] usbcore: registered new interface driver hub
> [ 0.264517] usbcore: registered new device driver usb
> [ 0.264517] PCI: Using ACPI for IRQ routing
> [ 0.264517] PCI: pci_cache_line_size set to 64 bytes
> [ 0.264517] reserve RAM buffer: 000000000009b800 - 000000000009ffff
> [ 0.264517] reserve RAM buffer: 00000000bffb0000 - 00000000bfffffff
> [ 0.264991] NetLabel: Initializing
> [ 0.264992] NetLabel: domain hash size = 128
> [ 0.264994] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.265003] NetLabel: unlabeled traffic allowed by default
> [ 0.272818] pnp: PnP ACPI init
> [ 0.272833] ACPI: bus type pnp registered
> [ 0.272930] pnp 00:00: [bus 00-ff]
> [ 0.272933] pnp 00:00: [io 0x0cf8-0x0cff]
> [ 0.272935] pnp 00:00: [io 0x0000-0x0cf7 window]
> [ 0.272938] pnp 00:00: [io 0x0d00-0xffff window]
> [ 0.272940] pnp 00:00: [mem 0x000a0000-0x000bffff window]
> [ 0.272942] pnp 00:00: [mem 0x000d0000-0x000dffff window]
> [ 0.272946] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
> [ 0.272948] pnp 00:00: [mem 0xf0000000-0xffffffff window]
> [ 0.273001] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
> [ 0.273011] pnp 00:01: [mem 0xfed14000-0xfed19fff]
> [ 0.273064] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
> [ 0.273067] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.273096] pnp 00:02: [dma 4]
> [ 0.273098] pnp 00:02: [io 0x0000-0x000f]
> [ 0.273100] pnp 00:02: [io 0x0081-0x0083]
> [ 0.273102] pnp 00:02: [io 0x0087]
> [ 0.273104] pnp 00:02: [io 0x0089-0x008b]
> [ 0.273105] pnp 00:02: [io 0x008f]
> [ 0.273107] pnp 00:02: [io 0x00c0-0x00df]
> [ 0.273132] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 0.273142] pnp 00:03: [io 0x0070-0x0071]
> [ 0.273151] pnp 00:03: [irq 8]
> [ 0.273178] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.273186] pnp 00:04: [io 0x0061]
> [ 0.273210] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 0.273218] pnp 00:05: [io 0x00f0-0x00ff]
> [ 0.273223] pnp 00:05: [irq 13]
> [ 0.273248] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 0.273481] pnp 00:06: [io 0x03f8-0x03ff]
> [ 0.273486] pnp 00:06: [irq 4]
> [ 0.273488] pnp 00:06: [dma 0 disabled]
> [ 0.273553] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 0.273948] pnp 00:07: [io 0x0378-0x037f]
> [ 0.273953] pnp 00:07: [irq 7]
> [ 0.273955] pnp 00:07: [dma 0 disabled]
> [ 0.274087] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
> [ 0.274113] pnp 00:08: [io 0x0060]
> [ 0.274115] pnp 00:08: [io 0x0064]
> [ 0.274119] pnp 00:08: [irq 1]
> [ 0.274155] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
> [ 0.274196] pnp 00:09: [irq 12]
> [ 0.274229] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
> [ 0.274307] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
> [ 0.274310] pnp 00:0a: [io 0x0a00-0x0adf]
> [ 0.274312] pnp 00:0a: [io 0x0ae0-0x0aef]
> [ 0.274363] system 00:0a: [io 0x0a00-0x0adf] has been reserved
> [ 0.274366] system 00:0a: [io 0x0ae0-0x0aef] has been reserved
> [ 0.274369] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.274437] pnp 00:0b: [io 0x0010-0x001f]
> [ 0.274440] pnp 00:0b: [io 0x0022-0x003f]
> [ 0.274441] pnp 00:0b: [io 0x0044-0x005f]
> [ 0.274443] pnp 00:0b: [io 0x0062-0x0063]
> [ 0.274445] pnp 00:0b: [io 0x0065-0x006f]
> [ 0.274447] pnp 00:0b: [io 0x0072-0x007f]
> [ 0.274448] pnp 00:0b: [io 0x0080]
> [ 0.274450] pnp 00:0b: [io 0x0084-0x0086]
> [ 0.274452] pnp 00:0b: [io 0x0088]
> [ 0.274455] pnp 00:0b: [io 0x008c-0x008e]
> [ 0.274457] pnp 00:0b: [io 0x0090-0x009f]
> [ 0.274459] pnp 00:0b: [io 0x00a2-0x00bf]
> [ 0.274461] pnp 00:0b: [io 0x00e0-0x00ef]
> [ 0.274463] pnp 00:0b: [io 0x04d0-0x04d1]
> [ 0.274464] pnp 00:0b: [io 0x0800-0x087f]
> [ 0.274466] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
> [ 0.274468] pnp 00:0b: [io 0x0480-0x04bf]
> [ 0.274470] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
> [ 0.274472] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
> [ 0.274541] system 00:0b: [io 0x04d0-0x04d1] has been reserved
> [ 0.274544] system 00:0b: [io 0x0800-0x087f] has been reserved
> [ 0.274546] system 00:0b: [io 0x0480-0x04bf] has been reserved
> [ 0.274549] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 0.274551] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
> [ 0.274554] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.274625] pnp 00:0c: [mem 0xffb00000-0xffbfffff]
> [ 0.274627] pnp 00:0c: [mem 0xfff00000-0xffffffff]
> [ 0.274655] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
> [ 0.274694] pnp 00:0d: [mem 0xffc00000-0xffefffff]
> [ 0.274744] system 00:0d: [mem 0xffc00000-0xffefffff] has been reserved
> [ 0.274747] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.274820] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
> [ 0.274822] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
> [ 0.274870] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
> [ 0.274873] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
> [ 0.274876] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.274906] pnp 00:0f: [mem 0xe0000000-0xefffffff]
> [ 0.274956] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
> [ 0.274959] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.275113] pnp 00:10: [mem 0x00000000-0x0009ffff]
> [ 0.275115] pnp 00:10: [mem 0x000c0000-0x000cffff]
> [ 0.275117] pnp 00:10: [mem 0x000e0000-0x000fffff]
> [ 0.275119] pnp 00:10: [mem 0x00100000-0xbfffffff]
> [ 0.275121] pnp 00:10: [mem 0x00000000-0xffffffffffffffff disabled]
> [ 0.275180] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
> [ 0.275183] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
> [ 0.275186] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
> [ 0.275188] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
> [ 0.275191] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.275308] pnp: PnP ACPI: found 17 devices
> [ 0.275309] ACPI: ACPI bus type pnp unregistered
> [ 0.312103] Switching to clocksource acpi_pm
> [ 0.312137] PCI: max bus depth: 1 pci_try_num: 2
> [ 0.312182] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
> [ 0.312186] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
> [ 0.312189] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 0.312192] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
> [ 0.312195] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0800000-0xc09fffff]
> [ 0.312198] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0a00000-0xc0bfffff 64bit pref]
> [ 0.312201] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
> [ 0.312204] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [ 0.312207] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
> [ 0.312210] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe7fffff]
> [ 0.312214] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.312218] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
> [ 0.312221] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
> [ 0.312225] pci 0000:00:1c.0: bridge window [mem 0xc0800000-0xc09fffff]
> [ 0.312229] pci 0000:00:1c.0: bridge window [mem 0xc0a00000-0xc0bfffff 64bit pref]
> [ 0.312234] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
> [ 0.312237] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
> [ 0.312241] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
> [ 0.312245] pci 0000:00:1c.1: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
> [ 0.312250] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
> [ 0.312253] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
> [ 0.312257] pci 0000:00:1c.2: bridge window [mem 0xfe900000-0xfe9fffff]
> [ 0.312261] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 0.312267] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
> [ 0.312269] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
> [ 0.312274] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
> [ 0.312277] pci 0000:00:1c.4: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
> [ 0.312283] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
> [ 0.312285] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
> [ 0.312290] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
> [ 0.312293] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
> [ 0.312299] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
> [ 0.312318] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.312321] pci 0000:00:01.0: setting latency timer to 64
> [ 0.312326] pci 0000:00:1c.0: enabling device (0104 -> 0107)
> [ 0.312333] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.312337] pci 0000:00:1c.0: setting latency timer to 64
> [ 0.312342] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> [ 0.312346] pci 0000:00:1c.1: setting latency timer to 64
> [ 0.312354] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.312357] pci 0000:00:1c.2: setting latency timer to 64
> [ 0.312363] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.312366] pci 0000:00:1c.4: setting latency timer to 64
> [ 0.312371] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> [ 0.312375] pci 0000:00:1c.5: setting latency timer to 64
> [ 0.312380] pci 0000:00:1e.0: setting latency timer to 64
> [ 0.312384] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
> [ 0.312386] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
> [ 0.312388] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
> [ 0.312390] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe7fffff]
> [ 0.312393] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.312395] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
> [ 0.312397] pci_bus 0000:02: resource 1 [mem 0xc0800000-0xc09fffff]
> [ 0.312399] pci_bus 0000:02: resource 2 [mem 0xc0a00000-0xc0bfffff 64bit pref]
> [ 0.312401] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
> [ 0.312403] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
> [ 0.312405] pci_bus 0000:03: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
> [ 0.312408] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
> [ 0.312409] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
> [ 0.312412] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 0.312414] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
> [ 0.312416] pci_bus 0000:05: resource 1 [mem 0xfea00000-0xfeafffff]
> [ 0.312418] pci_bus 0000:05: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
> [ 0.312420] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
> [ 0.312422] pci_bus 0000:06: resource 1 [mem 0xfeb00000-0xfebfffff]
> [ 0.312425] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
> [ 0.312427] pci_bus 0000:07: resource 4 [io 0x0000-0xffff]
> [ 0.312429] pci_bus 0000:07: resource 5 [mem 0x00000000-0xfffffffff]
> [ 0.312453] NET: Registered protocol family 2
> [ 0.312491] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 0.312587] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.312959] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.313062] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.313064] TCP reno registered
> [ 0.313066] UDP hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.313075] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.313132] NET: Registered protocol family 1
> [ 0.313150] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.313165] pci 0000:00:1a.0: PCI INT A disabled
> [ 0.313177] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 0.313191] pci 0000:00:1a.1: PCI INT B disabled
> [ 0.313199] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.313219] pci 0000:00:1a.7: PCI INT C disabled
> [ 0.313239] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 0.313254] pci 0000:00:1d.0: PCI INT A disabled
> [ 0.313263] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 0.313277] pci 0000:00:1d.1: PCI INT B disabled
> [ 0.313284] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.313298] pci 0000:00:1d.2: PCI INT C disabled
> [ 0.313304] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
> [ 0.313319] pci 0000:00:1d.3: PCI INT D disabled
> [ 0.313326] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 0.313339] pci 0000:00:1d.7: PCI INT A disabled
> [ 0.313360] pci 0000:01:00.0: Boot video device
> [ 0.313373] PCI: CLS 32 bytes, default 64
> [ 0.313428] Unpacking initramfs...
> [ 0.653964] Freeing initrd memory: 15804k freed
> [ 0.660788] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> [ 0.660791] apm: disabled - APM is not SMP safe.
> [ 0.660926] Intel AES-NI instructions are not detected.
> [ 0.661079] audit: initializing netlink socket (disabled)
> [ 0.661095] type=2000 audit(1332787894.661:1): initialized
> [ 0.684390] highmem bounce pool size: 64 pages
> [ 0.684395] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.695503] VFS: Disk quotas dquot_6.5.2
> [ 0.695557] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.696083] msgmni has been set to 1678
> [ 0.696142] SELinux: Registering netfilter hooks
> [ 0.696558] alg: No test for stdrng (krng)
> [ 0.696571] NET: Registered protocol family 38
> [ 0.696613] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 0.696650] io scheduler noop registered
> [ 0.696652] io scheduler deadline registered
> [ 0.696658] io scheduler cfq registered (default)
> [ 0.696876] pcieport 0000:00:01.0: setting latency timer to 64
> [ 0.696905] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
> [ 0.696970] pcieport 0000:00:1c.0: setting latency timer to 64
> [ 0.697023] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
> [ 0.697112] pcieport 0000:00:1c.1: setting latency timer to 64
> [ 0.697146] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
> [ 0.697234] pcieport 0000:00:1c.2: setting latency timer to 64
> [ 0.697267] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
> [ 0.697355] pcieport 0000:00:1c.4: setting latency timer to 64
> [ 0.697388] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
> [ 0.697476] pcieport 0000:00:1c.5: setting latency timer to 64
> [ 0.697509] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
> [ 0.697627] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
> [ 0.697629] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
> [ 0.697632] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
> [ 0.697648] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
> [ 0.697652] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
> [ 0.697668] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
> [ 0.697670] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
> [ 0.697674] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
> [ 0.697689] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
> [ 0.697691] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
> [ 0.697695] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
> [ 0.697710] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
> [ 0.697712] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
> [ 0.697716] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
> [ 0.697732] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
> [ 0.697734] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
> [ 0.697738] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
> [ 0.697757] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.697807] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 1462 ss_did 7360
> [ 0.697825] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
> [ 0.697834] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2942 ss_vid 1462 ss_did 7360
> [ 0.697850] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
> [ 0.697860] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 1462 ss_did 7360
> [ 0.697876] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
> [ 0.697886] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2948 ss_vid 1462 ss_did 7360
> [ 0.697902] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
> [ 0.697912] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 294a ss_vid 1462 ss_did 7360
> [ 0.697929] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
> [ 0.697937] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.697939] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.698253] intel_idle: MWAIT substates: 0x20
> [ 0.698255] intel_idle: does not run on family 6 model 15
> [ 0.698326] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
> [ 0.698330] ACPI: Power Button [PWRB]
> [ 0.698375] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 0.698378] ACPI: Power Button [PWRF]
> [ 0.700070] ERST: Table is not found!
> [ 0.700072] GHES: HEST is not enabled!
> [ 0.700085] isapnp: Scanning for PnP cards...
> [ 1.055917] isapnp: No Plug & Play device found
> [ 1.056011] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 1.076497] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.097724] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.106358] Non-volatile memory driver v1.3
> [ 1.106360] Linux agpgart interface v0.103
> [ 1.107481] loop: module loaded
> [ 1.107541] ahci 0000:05:00.0: version 3.0
> [ 1.107565] ata_piix 0000:00:1f.2: version 2.13
> [ 1.107577] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 1.107581] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
> [ 1.107613] ata_piix 0000:00:1f.2: setting latency timer to 64
> [ 1.107848] scsi0 : ata_piix
> [ 1.107929] scsi1 : ata_piix
> [ 1.109107] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
> [ 1.109111] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
> [ 1.109128] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 1.109134] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
> [ 1.109177] ata_piix 0000:00:1f.5: setting latency timer to 64
> [ 1.109401] scsi2 : ata_piix
> [ 1.109481] scsi3 : ata_piix
> [ 1.110534] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 19
> [ 1.110538] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 19
> [ 1.110597] Fixed MDIO Bus: probed
> [ 1.110664] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.110677] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 1.110692] ehci_hcd 0000:00:1a.7: setting latency timer to 64
> [ 1.110695] ehci_hcd 0000:00:1a.7: EHCI Host Controller
> [ 1.110765] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> [ 1.110787] ehci_hcd 0000:00:1a.7: debug port 1
> [ 1.114672] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
> [ 1.114686] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
> [ 1.124019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 1.124038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.124041] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.124043] usb usb1: Product: EHCI Host Controller
> [ 1.124045] usb usb1: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE ehci_hcd
> [ 1.124047] usb usb1: SerialNumber: 0000:00:1a.7
> [ 1.124164] hub 1-0:1.0: USB hub found
> [ 1.124168] hub 1-0:1.0: 4 ports detected
> [ 1.124239] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 1.124249] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 1.124252] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 1.124305] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> [ 1.124325] ehci_hcd 0000:00:1d.7: debug port 1
> [ 1.128222] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> [ 1.128235] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
> [ 1.138019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 1.138032] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.138034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.138036] usb usb2: Product: EHCI Host Controller
> [ 1.138038] usb usb2: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE ehci_hcd
> [ 1.138040] usb usb2: SerialNumber: 0000:00:1d.7
> [ 1.138147] hub 2-0:1.0: USB hub found
> [ 1.138151] hub 2-0:1.0: 8 ports detected
> [ 1.138230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.138243] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.138258] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 1.138265] uhci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 1.138268] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 1.138322] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> [ 1.138350] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009c00
> [ 1.138376] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.138378] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.138380] usb usb3: Product: UHCI Host Controller
> [ 1.138382] usb usb3: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.138384] usb usb3: SerialNumber: 0000:00:1a.0
> [ 1.138490] hub 3-0:1.0: USB hub found
> [ 1.138493] hub 3-0:1.0: 2 ports detected
> [ 1.138559] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 1.138565] uhci_hcd 0000:00:1a.1: setting latency timer to 64
> [ 1.138568] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 1.138621] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> [ 1.138649] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
> [ 1.138674] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.138676] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.138679] usb usb4: Product: UHCI Host Controller
> [ 1.138680] usb usb4: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.138682] usb usb4: SerialNumber: 0000:00:1a.1
> [ 1.138787] hub 4-0:1.0: USB hub found
> [ 1.138791] hub 4-0:1.0: 2 ports detected
> [ 1.138857] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 1.138864] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 1.138866] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 1.138918] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
> [ 1.138938] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009800
> [ 1.138963] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.138965] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.138968] usb usb5: Product: UHCI Host Controller
> [ 1.138969] usb usb5: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.138971] usb usb5: SerialNumber: 0000:00:1d.0
> [ 1.139081] hub 5-0:1.0: USB hub found
> [ 1.139085] hub 5-0:1.0: 2 ports detected
> [ 1.139154] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 1.139160] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 1.139163] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 1.139223] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
> [ 1.139245] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009480
> [ 1.139270] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.139272] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.139274] usb usb6: Product: UHCI Host Controller
> [ 1.139276] usb usb6: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.139278] usb usb6: SerialNumber: 0000:00:1d.1
> [ 1.139379] hub 6-0:1.0: USB hub found
> [ 1.139383] hub 6-0:1.0: 2 ports detected
> [ 1.139446] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 1.139453] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 1.139456] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 1.139508] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
> [ 1.139529] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009400
> [ 1.139553] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.139556] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.139558] usb usb7: Product: UHCI Host Controller
> [ 1.139559] usb usb7: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.139561] usb usb7: SerialNumber: 0000:00:1d.2
> [ 1.139660] hub 7-0:1.0: USB hub found
> [ 1.139663] hub 7-0:1.0: 2 ports detected
> [ 1.139727] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
> [ 1.139733] uhci_hcd 0000:00:1d.3: setting latency timer to 64
> [ 1.139736] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 1.139787] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
> [ 1.139808] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00009080
> [ 1.139832] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.139835] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.139837] usb usb8: Product: UHCI Host Controller
> [ 1.139839] usb usb8: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.139841] usb usb8: SerialNumber: 0000:00:1d.3
> [ 1.139939] hub 8-0:1.0: USB hub found
> [ 1.139943] hub 8-0:1.0: 2 ports detected
> [ 1.140061] usbcore: registered new interface driver usbserial
> [ 1.140070] USB Serial support registered for generic
> [ 1.140083] usbcore: registered new interface driver usbserial_generic
> [ 1.140085] usbserial: USB Serial Driver core
> [ 1.140144] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
> [ 1.142542] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.142548] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.142650] mousedev: PS/2 mouse device common for all mice
> [ 1.142850] rtc_cmos 00:03: RTC can wake from S4
> [ 1.142965] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
> [ 1.142985] rtc0: alarms up to one month, y3k, 114 bytes nvram
> [ 1.143049] device-mapper: uevent: version 1.0.3
> [ 1.143129] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@xxxxxxxxxx
> [ 1.143173] cpuidle: using governor ladder
> [ 1.143175] cpuidle: using governor menu
> [ 1.143310] EFI Variables Facility v0.08 2004-May-17
> [ 1.143451] usbcore: registered new interface driver usbhid
> [ 1.143453] usbhid: USB HID core driver
> [ 1.143499] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 1.143510] TCP cubic registered
> [ 1.143512] Initializing XFRM netlink socket
> [ 1.143626] NET: Registered protocol family 10
> [ 1.143745] Mobile IPv6
> [ 1.143748] NET: Registered protocol family 17
> [ 1.143759] Registering the dns_resolver key type
> [ 1.143773] Using IPI No-Shortcut mode
> [ 1.143895] PM: Hibernation image not present or could not be loaded.
> [ 1.143909] registered taskstats version 1
> [ 1.149523] Magic number: 4:185:899
> [ 1.149603] rtc_cmos 00:03: setting system clock to 2012-03-26 18:51:35 UTC (1332787895)
> [ 1.150476] Initializing network drop monitor service
> [ 1.161406] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
> [ 1.425771] ata3: SATA link down (SStatus 0 SControl 300)
> [ 1.512378] input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
> [ 1.565064] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.565168] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.576064] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.580317] ata4.00: ATA-7: Maxtor 7V250F0, VA111630, max UDMA/133
> [ 1.580321] ata4.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 1.581021] usb 4-1: new low-speed USB device number 2 using uhci_hcd
> [ 1.587163] ata4.00: configured for UDMA/133
> [ 1.608220] ata2.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
> [ 1.608223] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 1.616082] ata1.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
> [ 1.616086] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 1.662033] Refined TSC clocksource calibration: 2402.378 MHz.
> [ 1.662038] Switching to clocksource tsc
> [ 1.683190] ata2.00: configured for UDMA/133
> [ 1.691047] ata1.00: configured for UDMA/133
> [ 1.691200] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> [ 1.691402] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
> [ 1.691414] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.691473] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.691477] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.691511] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.691657] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> [ 1.691878] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
> [ 1.691889] sd 1:0:0:0: Attached scsi generic sg1 type 0
> [ 1.691988] sd 1:0:0:0: [sdb] Write Protect is off
> [ 1.691992] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 1.692032] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.692091] scsi 3:0:0:0: Direct-Access ATA Maxtor 7V250F0 VA11 PQ: 0 ANSI: 5
> [ 1.692268] sd 3:0:0:0: [sdc] 490234752 512-byte logical blocks: (251 GB/233 GiB)
> [ 1.692310] sd 3:0:0:0: Attached scsi generic sg2 type 0
> [ 1.692360] sd 3:0:0:0: [sdc] Write Protect is off
> [ 1.692364] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> [ 1.692393] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.715627] sdc: sdc1
> [ 1.715885] sd 3:0:0:0: [sdc] Attached SCSI disk
> [ 1.722872] sdb: sdb1 sdb2 sdb3
> [ 1.723190] sd 1:0:0:0: [sdb] Attached SCSI disk
> [ 1.730721] sda: sda1 sda2 sda3
> [ 1.730990] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.731061] Freeing unused kernel memory: 644k freed
> [ 1.731261] Write protecting the kernel text: 5408k
> [ 1.731315] Write protecting the kernel read-only data: 2096k
> [ 1.731319] NX-protecting the kernel data: 4832k
> [ 1.768691] usb 4-1: New USB device found, idVendor=051d, idProduct=0002
> [ 1.768696] usb 4-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
> [ 1.768700] usb 4-1: Product: APC ES 725 FW:821.y2 .A USB FW:y2
> [ 1.768703] usb 4-1: Manufacturer: APC
> [ 1.768706] usb 4-1: SerialNumber: 3B0628X18842
> [ 1.867527] dracut: dracut-013-20.fc16
> [ 1.892049] udevd[122]: starting version 173
> [ 1.960670] dracut: Starting plymouth daemon
> [ 2.056749] sata_sil24 0000:03:00.0: version 1.1
> [ 2.056771] sata_sil24 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 2.056826] sata_sil24 0000:03:00.0: setting latency timer to 64
> [ 2.059272] pata_marvell 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 2.059303] pata_marvell 0000:05:00.0: setting latency timer to 64
> [ 2.061729] scsi5 : pata_marvell
> [ 2.062173] scsi4 : sata_sil24
> [ 2.062765] scsi7 : sata_sil24
> [ 2.062830] ata5: SATA max UDMA/100 host m128@0xfe8ffc00 port 0xfe8f8000 irq 17
> [ 2.062835] ata6: SATA max UDMA/100 host m128@0xfe8ffc00 port 0xfe8fa000 irq 17
> [ 2.062874] sata_sil24 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 2.062881] scsi6 : pata_marvell
> [ 2.062942] sata_sil24 0000:04:00.0: setting latency timer to 64
> [ 2.062948] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
> [ 2.062952] ata8: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
> [ 2.065053] scsi8 : sata_sil24
> [ 2.065207] scsi9 : sata_sil24
> [ 2.065259] ata9: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9f8000 irq 18
> [ 2.065263] ata10: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9fa000 irq 18
> [ 2.217434] ata7.00: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.03, max UDMA/66
> [ 2.221802] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.221806] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.221889] mdadm: sending ioctl 1261 to a partition!
> [ 2.221891] mdadm: sending ioctl 1261 to a partition!
> [ 2.223422] ata7.00: configured for UDMA/66
> [ 2.235804] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC APC ES 725 FW:821.y2 .A USB FW:y2 ] on usb-0000:00:1a.1-1/input0
> [ 2.243045] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.243048] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.243137] mdadm: sending ioctl 1261 to a partition!
> [ 2.243139] mdadm: sending ioctl 1261 to a partition!
> [ 2.255680] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.255684] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.278604] md: bind<sdb1>
> [ 2.280946] md: bind<sda1>
> [ 2.283163] md: raid1 personality registered for level 1
> [ 4.082034] ata5: SATA link down (SStatus 0 SControl 0)
> [ 4.197035] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 4.197372] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [ 4.199141] ata9.00: hard resetting link
> [ 4.537254] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 4.537290] ata9.01: hard resetting link
> [ 4.963015] ata9.01: softreset failed (SRST command error)
> [ 5.073014] ata9.01: failed to read SCR 0 (Emask=0x1)
> [ 5.073019] ata9.01: reset failed (errno=-85), retrying in 10 secs
> [ 6.102041] ata6: SATA link down (SStatus 0 SControl 0)
> [ 6.103522] scsi 5:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H58N 1.03 PQ: 0 ANSI: 5
> [ 6.106341] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 6.106345] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 6.106541] sr 5:0:0:0: Attached scsi CD-ROM sr0
> [ 6.106728] sr 5:0:0:0: Attached scsi generic sg3 type 5
> [ 14.537112] ata9.01: reset failed, giving up
> [ 14.537117] ata9.15: hard resetting link
> [ 14.537120] ata9: controller in dubious state, performing PORT_RST
> [ 16.691040] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 16.691389] ata9.00: hard resetting link
> [ 17.029255] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 17.029290] ata9.01: hard resetting link
> [ 17.367252] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 17.367287] ata9.02: hard resetting link
> [ 17.683040] ata9.02: softreset failed (SRST command error)
> [ 17.683099] ata9.02: failed to read SCR 0 (Emask=0x1)
> [ 17.683103] ata9.02: reset failed (errno=-85), retrying in 10 secs
> [ 27.367023] ata9.02: reset failed, giving up
> [ 27.367028] ata9.15: hard resetting link
> [ 29.488078] ata9.15: softreset failed (SRST command error)
> [ 29.488082] ata9.15: reset failed (errno=-5), retrying in 8 secs
> [ 37.367018] ata9.15: hard resetting link
> [ 39.488071] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 39.488077] ata9.15: PMP revalidation failed (errno=-19)
> [ 44.488012] ata9.15: hard resetting link
> [ 46.620040] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 46.620470] ata9.00: hard resetting link
> [ 46.958247] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 46.958285] ata9.01: hard resetting link
> [ 47.296247] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 47.296284] ata9.02: hard resetting link
> [ 47.634249] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 47.634286] ata9.03: hard resetting link
> [ 48.060017] ata9.03: softreset failed (SRST command error)
> [ 48.060035] ata9.03: failed to read SCR 0 (Emask=0x40)
> [ 48.060038] ata9.03: reset failed (errno=-85), retrying in 10 secs
> [ 57.634037] ata9.03: reset failed, giving up
> [ 57.634041] ata9.15: hard resetting link
> [ 57.634043] ata9: controller in dubious state, performing PORT_RST
> [ 59.788039] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 59.788377] ata9.00: hard resetting link
> [ 60.126253] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 60.126289] ata9.01: hard resetting link
> [ 60.464250] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 60.464285] ata9.02: hard resetting link
> [ 60.802251] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 60.802286] ata9.03: hard resetting link
> [ 61.140252] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 61.140287] ata9.04: hard resetting link
> [ 61.445390] ata9.04: SATA link down (SStatus 0 SControl 320)
> [ 61.445457] ata9.05: hard resetting link
> [ 61.750359] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [ 61.779136] ata9.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [ 61.779141] ata9.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [ 61.821129] ata9.00: configured for UDMA/100
> [ 61.849775] ata9.01: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [ 61.849779] ata9.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 61.891640] ata9.01: configured for UDMA/100
> [ 61.920328] ata9.02: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [ 61.920333] ata9.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 61.962282] ata9.02: configured for UDMA/100
> [ 61.990999] ata9.03: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [ 61.991009] ata9.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 62.032997] ata9.03: configured for UDMA/100
> [ 62.033088] ata9: EH complete
> [ 62.033219] scsi 8:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
> [ 62.033413] sd 8:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> [ 62.033453] sd 8:0:0:0: Attached scsi generic sg4 type 0
> [ 62.033511] sd 8:0:0:0: [sdd] Write Protect is off
> [ 62.033516] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> [ 62.033557] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 62.033638] scsi 8:1:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
> [ 62.033810] sd 8:1:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> [ 62.033898] sd 8:1:0:0: [sde] Write Protect is off
> [ 62.033902] sd 8:1:0:0: [sde] Mode Sense: 00 3a 00 00
> [ 62.033939] sd 8:1:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 62.033977] sd 8:1:0:0: Attached scsi generic sg5 type 0
> [ 62.034257] scsi 8:2:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
> [ 62.034426] sd 8:2:0:0: [sdf] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> [ 62.034514] sd 8:2:0:0: [sdf] Write Protect is off
> [ 62.034518] sd 8:2:0:0: [sdf] Mode Sense: 00 3a 00 00
> [ 62.034554] sd 8:2:0:0: Attached scsi generic sg6 type 0
> [ 62.034563] sd 8:2:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 62.034743] scsi 8:3:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
> [ 62.034910] sd 8:3:0:0: [sdg] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> [ 62.034954] sd 8:3:0:0: Attached scsi generic sg7 type 0
> [ 62.035000] sd 8:3:0:0: [sdg] Write Protect is off
> [ 62.035011] sd 8:3:0:0: [sdg] Mode Sense: 00 3a 00 00
> [ 62.035063] sd 8:3:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 62.041037] sdd: unknown partition table
> [ 62.041278] sd 8:0:0:0: [sdd] Attached SCSI disk
> [ 62.055364] sde: unknown partition table
> [ 62.055517] sd 8:1:0:0: [sde] Attached SCSI disk
> [ 62.059238] sdf: unknown partition table
> [ 62.059395] sd 8:2:0:0: [sdf] Attached SCSI disk
> [ 62.060249] sdg: unknown partition table
> [ 62.060399] sd 8:3:0:0: [sdg] Attached SCSI disk
> [ 64.167041] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 64.167363] ata10.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [ 64.169254] ata10.00: hard resetting link
> [ 64.573260] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 64.573299] ata10.01: hard resetting link
> [ 64.999017] ata10.01: softreset failed (SRST command error)
> [ 64.999034] ata10.01: failed to read SCR 0 (Emask=0x40)
> [ 64.999038] ata10.01: reset failed (errno=-85), retrying in 10 secs
> [ 74.573049] ata10.01: reset failed, giving up
> [ 74.573058] ata10.15: hard resetting link
> [ 74.573061] ata10: controller in dubious state, performing PORT_RST
> [ 76.727039] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 76.727371] ata10.00: hard resetting link
> [ 77.131252] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 77.131287] ata10.01: hard resetting link
> [ 77.535261] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 77.535297] ata10.02: hard resetting link
> [ 77.851041] ata10.02: softreset failed (SRST command error)
> [ 77.961014] ata10.02: failed to read SCR 0 (Emask=0x1)
> [ 77.961018] ata10.02: reset failed (errno=-85), retrying in 10 secs
> [ 87.535028] ata10.02: reset failed, giving up
> [ 87.535033] ata10.15: hard resetting link
> [ 87.535035] ata10: controller in dubious state, performing PORT_RST
> [ 89.689041] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 89.689414] ata10.00: hard resetting link
> [ 90.093265] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 90.093303] ata10.01: hard resetting link
> [ 90.497259] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 90.497296] ata10.02: hard resetting link
> [ 90.901259] ata10.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 90.901296] ata10.03: hard resetting link
> [ 91.327009] ata10.03: softreset failed (SRST command error)
> [ 91.327024] ata10.03: failed to read SCR 0 (Emask=0x40)
> [ 91.327026] ata10.03: reset failed (errno=-85), retrying in 10 secs
> [ 100.901043] ata10.03: reset failed, giving up
> [ 100.901048] ata10.15: hard resetting link
> [ 100.901051] ata10: controller in dubious state, performing PORT_RST
> [ 103.055046] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 103.055433] ata10.00: hard resetting link
> [ 103.459260] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 103.459296] ata10.01: hard resetting link
> [ 103.863260] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 103.863296] ata10.02: hard resetting link
> [ 104.267287] ata10.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 104.267332] ata10.03: hard resetting link
> [ 104.671261] ata10.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 104.671297] ata10.04: hard resetting link
> [ 104.976391] ata10.04: SATA link down (SStatus 0 SControl 320)
> [ 104.976458] ata10.05: hard resetting link
> [ 105.281363] ata10.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [ 105.282235] ata10.00: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 105.282240] ata10.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [ 105.283269] ata10.00: configured for UDMA/100
> [ 105.303836] ata10.01: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 105.303840] ata10.01: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 105.304715] ata10.01: configured for UDMA/100
> [ 105.319063] ata10.02: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 105.319067] ata10.02: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 105.319948] ata10.02: configured for UDMA/100
> [ 105.333306] ata10.03: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 105.333310] ata10.03: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 105.334189] ata10.03: configured for UDMA/100
> [ 105.334259] ata10: EH complete
> [ 105.334390] scsi 9:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
> [ 105.334575] sd 9:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 105.334617] sd 9:0:0:0: Attached scsi generic sg8 type 0
> [ 105.334672] sd 9:0:0:0: [sdh] Write Protect is off
> [ 105.334676] sd 9:0:0:0: [sdh] Mode Sense: 00 3a 00 00
> [ 105.334717] sd 9:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 105.334785] scsi 9:1:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
> [ 105.334954] sd 9:1:0:0: [sdi] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 105.335040] sd 9:1:0:0: [sdi] Write Protect is off
> [ 105.335044] sd 9:1:0:0: [sdi] Mode Sense: 00 3a 00 00
> [ 105.335076] sd 9:1:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 105.335274] sd 9:1:0:0: Attached scsi generic sg9 type 0
> [ 105.335459] scsi 9:2:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
> [ 105.335626] sd 9:2:0:0: [sdj] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 105.335714] sd 9:2:0:0: [sdj] Write Protect is off
> [ 105.335718] sd 9:2:0:0: [sdj] Mode Sense: 00 3a 00 00
> [ 105.335757] sd 9:2:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 105.335766] sd 9:2:0:0: Attached scsi generic sg10 type 0
> [ 105.335938] scsi 9:3:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
> [ 105.336111] sd 9:3:0:0: [sdk] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 105.336161] sd 9:3:0:0: Attached scsi generic sg11 type 0
> [ 105.336202] sd 9:3:0:0: [sdk] Write Protect is off
> [ 105.336206] sd 9:3:0:0: [sdk] Mode Sense: 00 3a 00 00
> [ 105.336260] sd 9:3:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 105.346322] sdh: unknown partition table
> [ 105.346554] sd 9:0:0:0: [sdh] Attached SCSI disk
> [ 105.360434] sdj: unknown partition table
> [ 105.360598] sd 9:2:0:0: [sdj] Attached SCSI disk
> [ 105.361877] sdi: unknown partition table
> [ 105.362042] sd 9:1:0:0: [sdi] Attached SCSI disk
> [ 105.366343] sdk: unknown partition table
> [ 105.366502] sd 9:3:0:0: [sdk] Attached SCSI disk
> [ 105.366688] bio: create slab <bio-1> at 1
> [ 105.366782] md/raid1:md0: active with 2 out of 2 mirrors
> [ 105.366819] md0: detected capacity change from 0 to 314507264
> [ 105.385841] md0:
> [ 105.387349] scsi_verify_blk_ioctl: 122 callbacks suppressed
> [ 105.387352] mdadm: sending ioctl 1261 to a partition!
> [ 105.387355] mdadm: sending ioctl 1261 to a partition!
> [ 105.445648] mdadm: sending ioctl 1261 to a partition!
> [ 105.445651] mdadm: sending ioctl 1261 to a partition!
> [ 105.475825] mdadm: sending ioctl 1261 to a partition!
> [ 105.475828] mdadm: sending ioctl 1261 to a partition!
> [ 105.482162] md: bind<sdg>
> [ 105.485146] md: bind<sdf>
> [ 105.488262] md: bind<sde>
> [ 105.491687] md: bind<sdd>
> [ 105.494574] async_tx: api initialized (async)
> [ 105.494927] xor: automatically using best checksumming function: pIII_sse
> [ 105.499004] pIII_sse : 8432.000 MB/sec
> [ 105.499006] xor: using function: pIII_sse (8432.000 MB/sec)
> [ 105.508257] mdadm: sending ioctl 1261 to a partition!
> [ 105.508260] mdadm: sending ioctl 1261 to a partition!
> [ 105.516064] raid6: int32x1 902 MB/s
> [ 105.533042] raid6: int32x2 773 MB/s
> [ 105.550091] raid6: int32x4 714 MB/s
> [ 105.567020] raid6: int32x8 796 MB/s
> [ 105.584015] raid6: mmxx1 3160 MB/s
> [ 105.601018] raid6: mmxx2 3523 MB/s
> [ 105.618010] raid6: sse1x1 2062 MB/s
> [ 105.635022] raid6: sse1x2 2734 MB/s
> [ 105.652017] raid6: sse2x1 3707 MB/s
> [ 105.669017] raid6: sse2x2 4906 MB/s
> [ 105.669018] raid6: using algorithm sse2x2 (4906 MB/s)
> [ 105.669800] md: raid6 personality registered for level 6
> [ 105.669802] md: raid5 personality registered for level 5
> [ 105.669804] md: raid4 personality registered for level 4
> [ 105.669950] md/raid:md6: device sdd operational as raid disk 0
> [ 105.669952] md/raid:md6: device sde operational as raid disk 1
> [ 105.669954] md/raid:md6: device sdf operational as raid disk 2
> [ 105.669956] md/raid:md6: device sdg operational as raid disk 3
> [ 105.670311] md/raid:md6: allocated 4216kB
> [ 105.670342] md/raid:md6: raid level 5 active with 4 out of 4 devices, algorithm 2
> [ 105.670344] RAID conf printout:
> [ 105.670345] --- level:5 rd:4 wd:4
> [ 105.670347] disk 0, o:1, dev:sdd
> [ 105.670349] disk 1, o:1, dev:sde
> [ 105.670350] disk 2, o:1, dev:sdf
> [ 105.670352] disk 3, o:1, dev:sdg
> [ 105.670377] md6: detected capacity change from 0 to 4500897595392
> [ 105.672274] md: bind<sdk>
> [ 105.673419] md6: unknown partition table
> [ 105.675966] md: bind<sdj>
> [ 105.679622] md: bind<sdi>
> [ 105.683718] md: bind<sdh>
> [ 105.687032] md/raid:md7: device sdh operational as raid disk 1
> [ 105.687035] md/raid:md7: device sdi operational as raid disk 0
> [ 105.687037] md/raid:md7: device sdj operational as raid disk 2
> [ 105.687038] md/raid:md7: device sdk operational as raid disk 3
> [ 105.687363] md/raid:md7: allocated 4216kB
> [ 105.687395] md/raid:md7: raid level 5 active with 4 out of 4 devices, algorithm 2
> [ 105.687397] RAID conf printout:
> [ 105.687398] --- level:5 rd:4 wd:4
> [ 105.687400] disk 0, o:1, dev:sdi
> [ 105.687401] disk 1, o:1, dev:sdh
> [ 105.687403] disk 2, o:1, dev:sdj
> [ 105.687404] disk 3, o:1, dev:sdk
> [ 105.687428] md7: detected capacity change from 0 to 1500315451392
> [ 105.689250] md7: unknown partition table
> [ 140.072536] dracut Warning: No root device "block:/dev/disk/by-uuid/773cb4b3-4bb0-4705-b494-08cb9c2b5d73" found
------
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Yanmin Zhang: "Re: [PATCH] x86_fixup_irqs: Fix possible missing interrupt handlewhen disabling CPU"
Previous message: Paul Mundt: "Re: [PATCH 1/2] dma: shdma: fix runtime PM: clear channel buffers on reset"
In reply to: ANEZAKI, Akira: "Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port MultiplierSil3726"
Next in thread: Gwendal Grignou: "Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA PortMultiplier Sil3726"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]