Re: [PATCH 05/07] Watchdog: DA9052/53 watchdog support v1

From: Shubhrajyoti
Date: Fri Mar 30 2012 - 06:11:45 EST

Hi Ashish,
Some comments / suggestions .

On Friday 30 March 2012 03:02 PM, Ashish Jangam wrote:
> Any update on this patch?
> On Tue, 2012-03-13 at 17:57 +0530, Ashish Jangam wrote:
>> Any update on below patch?
>> On Mon, 2012-02-06 at 18:18 +0530, Ashish Jangam wrote:
>>> This driver adds support for the watchdog functionality provided by the
>>> Dialog Semiconductor DA9052/53 PMIC chip.
>>>
>>> This patch is functionally tested on Samsung SMDKV6410.
>>>
>>> Signed-off-by: David Dajun Chen <dchen@xxxxxxxxxxx>
>>> Signed-off-by: Ashish Jangam <ashish.jangam@xxxxxxxxxxxxxxx>
>>> ---
>>> Documentation/watchdog/watchdog-parameters.txt | 5 +
>>> drivers/watchdog/Kconfig | 6 +
>>> drivers/watchdog/Makefile | 1 +
>>> drivers/watchdog/da9052_wdt.c | 333 ++++++++++++++++++++++++
>>> 4 files changed, 345 insertions(+), 0 deletions(-)
>>> create mode 100644 drivers/watchdog/da9052_wdt.c
>>> diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
>>> index 17ddd82..04fddba 100644
>>> --- a/Documentation/watchdog/watchdog-parameters.txt
>>> +++ b/Documentation/watchdog/watchdog-parameters.txt
>>> @@ -78,6 +78,11 @@ wd0_timeout: Default watchdog0 timeout in 1/10secs
>>> wd1_timeout: Default watchdog1 timeout in 1/10secs
>>> wd2_timeout: Default watchdog2 timeout in 1/10secs
>>> -------------------------------------------------
>>> +da9052wdt:
>>> +timeout: Watchdog timeout in seconds. 2<= timeout <=131, default=2.048s
>>> +nowayout: Watchdog cannot be stopped once started
>>> + (default=kernel config parameter)
>>> +-------------------------------------------------
>>> davinci_wdt:
>>> heartbeat: Watchdog heartbeat period in seconds from 1 to 600, default 60
>>> -------------------------------------------------
>>> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
>>> index 877b107..3fb9633 100644
>>> --- a/drivers/watchdog/Kconfig
>>> +++ b/drivers/watchdog/Kconfig
>>> @@ -63,6 +63,12 @@ config SOFT_WATCHDOG
>>> To compile this driver as a module, choose M here: the
>>> module will be called softdog.
>>>
>>> +config DA9052_WATCHDOG
>>> + tristate "Dialog DA9052/DA9053 Watchdog"
>>> + depends on PMIC_DA9052
>>> + help
>>> + Support for the watchdog in the DA9052-BC and DA9053-AA/Bx PMICs.
May be you can consider some documentation on module compilation.
>>> +
>>> config WM831X_WATCHDOG
>>> tristate "WM831x watchdog"
>>> depends on MFD_WM831X
>>> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
>>> index e8f479a..0ecbe5a 100644
>>> --- a/drivers/watchdog/Makefile
>>> +++ b/drivers/watchdog/Makefile
>>> @@ -166,4 +166,5 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o
>>> obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
>>> obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
>>> obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
>>> +obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
>>> obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
>>> diff --git a/drivers/watchdog/da9052_wdt.c b/drivers/watchdog/da9052_wdt.c
>>> new file mode 100644
>>> index 0000000..b08091e
>>> --- /dev/null
>>> +++ b/drivers/watchdog/da9052_wdt.c
>>> @@ -0,0 +1,333 @@
>>> +/*
>>> + * System monitoring driver for DA9052 PMICs.
>>> + *
>>> + * Copyright(c) 2012 Dialog Semiconductor Ltd.
>>> + *
>>> + * Author: Dajun Chen <dchen@xxxxxxxxxxx>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License as published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>> + *
>>> + */
>>> +
>>> +#include <linux/miscdevice.h>
>>> +#include <linux/module.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/fs.h>
>>> +#include <linux/uaccess.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/time.h>
>>> +#include <linux/watchdog.h>
>>> +#include <linux/types.h>
>>> +#include <linux/kernel.h>
>>> +
>>> +#include <linux/mfd/da9052/reg.h>
>>> +#include <linux/mfd/da9052/da9052.h>
>>> +
>>> +static int nowayout = WATCHDOG_NOWAYOUT;
So it is initialised regardless of any compile time options?
>>> +static int wdt_state = WDIOS_DISABLECARD;
>>> +static struct miscdevice da9052_wdt_miscdev;
>>> +static unsigned long da9052_wdt_users;
>>> +static int da9052_wdt_expect_close;
>>> +struct da9052 *da9052;
Is this needed ?
>>> +static DEFINE_MUTEX(wdt_mutex);
>>> +
>>> +static struct {
>>> + u8 reg_val;
>>> + int time; /* Seconds */
>>> +} da9052_wdt_maps[] = {
>>> + { 1, 2 },
>>> + { 2, 4 },
>>> + { 3, 8 },
>>> + { 4, 16 },
>>> + { 5, 32 },
>>> + { 5, 33 }, /* Actual time 32.768s so included both 32s and 33s */
>>> + { 6, 65 },
>>> + { 6, 66 }, /* Actual time 65.536s so include both, 65s and 66s */
>>> + { 7, 131 },
>>> +};
>>> +
>>> +static int da9052_wdt_set_timeout(struct da9052 *da9052, unsigned char timeout)
>>> +{
>>> + int ret;
>>> +
>>> + /* Disable the Watchdog timer for 150us before changing the
>>> + * time out value
>>> + */
>>> + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
>>> + DA9052_CONTROLD_TWDSCALE, 0);
>>> + if (ret < 0) {
>>> + dev_err(da9052->dev, "Failed to disable watchdog bit, %d\n",
>>> + ret);
>>> + return ret;
>>> + }
>>> +
>>> + mutex_lock(&wdt_mutex);
>>> + wdt_state = (timeout == 0) ? WDIOS_DISABLECARD : WDIOS_ENABLECARD;
>>> + mutex_unlock(&wdt_mutex);
>>> +
>>> + if (timeout) {
>>> + udelay(150);
Could you explain the delay?
>>> +
>>> + /* Set the desired timeout */
>>> + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
>>> + DA9052_CONTROLD_TWDSCALE, timeout);
>>> + if (ret < 0) {
>>> + dev_err(da9052->dev,
>>> + "Failed to update timescale bit, %d\n", ret);
>>> + return ret;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int da9052_wdt_start(struct da9052 *da9052)
>>> +{
>>> + int ret = 0;
>>> +
>>> +
>>> + if (wdt_state == WDIOS_DISABLECARD) {
>>> + /* Default 2.048s */
>>> + ret = da9052_wdt_set_timeout(da9052, 1);
>>> + if (ret <= 0)
>>> + goto err;
>>> +
>>> + mutex_lock(&wdt_mutex);
>>> + wdt_state = WDIOS_ENABLECARD;
>>> + mutex_unlock(&wdt_mutex);
>>> + }
>>> +
>>> +err:
>>> + return ret;
>>> +}
>>> +
>>> +static int da9052_wdt_stop(struct da9052 *da9052)
>>> +{
>>> + int ret = 0;
>>> +
>>> + mutex_lock(&wdt_mutex);
>>> +
>>> + if (wdt_state == WDIOS_ENABLECARD) {
>>> + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
>>> + DA9052_CONTROLD_TWDSCALE, 0);
>>> + if (ret < 0) {
>>> + dev_err(da9052->dev,
>>> + "Failed to disable watchdog bit strobe bit, %d\n",
>>> + ret);
>>> + goto err;
>>> + }
>>> +
>>> + wdt_state = WDIOS_DISABLECARD;
>>> + }
>>> +
>>> +err:
>>> + mutex_unlock(&wdt_mutex);
>>> + return ret;
>>> +}
>>> +
>>> +static void da9052_wdt_strobe(struct da9052 *da9052)
>>> +{
>>> + int ret;
>>> +
>>> + if (wdt_state == WDIOS_ENABLECARD) {
>>> + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
>>> + DA9052_CONTROLD_WATCHDOG, 1 << 7);
>>> + if (ret < 0) {
>>> + dev_err(da9052->dev,
>>> + "Failed to update watchdog strobe bit, %d\n",
>>> + ret);
>>> + return;
>>> + }
>>> + }
>>> +}
>>> +
>>> +static int da9052_wdt_open(struct inode *inode, struct file *file)
>>> +{
>>> + int ret;
>>> +
>>> + if (test_and_set_bit(0, &da9052_wdt_users))
>>> + return -EBUSY;
>>> +
>>> + ret = da9052_wdt_start(da9052);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + return nonseekable_open(inode, file);
>>> +}
>>> +
>>> +static int da9052_wdt_release(struct inode *inode, struct file *file)
>>> +{
>>> + int ret = 0;
>>> +
>>> + if (da9052_wdt_expect_close == 42)
>>> + ret = da9052_wdt_stop(da9052);
>>> + else
>>> + da9052_wdt_strobe(da9052);
>>> +
>>> + da9052_wdt_expect_close = 0;
>>> + clear_bit(0, &da9052_wdt_users);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static struct watchdog_info da9052_wdt_info = {
>>> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
>>> + .identity = "DA9052 Watchdog",
>>> +};
>>> +
>>> +static long da9052_wdt_ioctl(struct file *file, uint cmd, unsigned long arg)
>>> +{
>>> + void __user *argp = (void __user *)arg;
>>> + int ret = 0, timeout, i, __user *p = argp;
>>> +
>>> + switch (cmd) {
>>> + case WDIOC_GETSUPPORT:
>>> + ret = copy_to_user(argp, &da9052_wdt_info,
>>> + sizeof(da9052_wdt_info)) ? -EFAULT : 0;
>>> + break;
>>> + case WDIOC_GETSTATUS:
>>> + case WDIOC_GETBOOTSTATUS:
>>> + ret = put_user(0, p);
Did not understand this?
>>> + break;
>>> + case WDIOC_SETOPTIONS:
>>> + {
>>> + int options;
>>> + ret = get_user(options, p);
>>> + if (ret)
>>> + break;
>>> +
>>> + if (options == WDIOS_ENABLECARD)
>>> + ret = da9052_wdt_start(da9052);
>>> +
>>> + if (options == WDIOS_DISABLECARD)
>>> + ret = da9052_wdt_stop(da9052);
>>> +
>>> + break;
>>> + }
>>> + case WDIOC_KEEPALIVE:
>>> + da9052_wdt_strobe(da9052);
>>> + break;
>>> + case WDIOC_SETTIMEOUT:
>>> + ret = get_user(timeout, p);
>>> + if (ret)
>>> + break;
>>> +
>>> + for (i = 0; i < ARRAY_SIZE(da9052_wdt_maps); i++)
>>> + if (da9052_wdt_maps[i].time == timeout)
>>> + break;
>>> + if (i == ARRAY_SIZE(da9052_wdt_maps))
>>> + ret = -EINVAL;
>>> + else
>>> + ret = da9052_wdt_set_timeout(da9052,
>>> + da9052_wdt_maps[i].reg_val);
>>> +
>>> + break;
>>> + case WDIOC_GETTIMEOUT:
>>> + ret = da9052_reg_read(da9052, DA9052_CONTROL_D_REG);
>>> + if (ret < 0)
>>> + break;
>>> +
>>> + ret &= DA9052_CONTROLD_TWDSCALE;
>>> + for (i = 0; i < ARRAY_SIZE(da9052_wdt_maps); i++)
>>> + if (da9052_wdt_maps[i].reg_val == ret)
>>> + break;
>>> + if (i == ARRAY_SIZE(da9052_wdt_maps))
>>> + ret = -EINVAL;
>>> + else
>>> + ret = put_user(da9052_wdt_maps[i].time, p);
>>> +
>>> + break;
>>> + default:
>>> + return -ENOTTY;
>>> + }
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static ssize_t da9052_wdt_write(struct file *file,
>>> + const char __user *data, size_t count,
>>> + loff_t *ppos)
>>> +{
>>> + size_t i;
>>> +
>>> + /* Check the magic character 'V' and reload the timer */
>>> + if (count) {
>>> + if (!nowayout) {
>>> + da9052_wdt_expect_close = 0;
>>> +
>>> + /* scan for magic character */
>>> + for (i = 0; i != count; i++) {
>>> + char c;
>>> + if (get_user(c, data + i))
>>> + return -EFAULT;
>>> + if (c == 'V')
>>> + da9052_wdt_expect_close = 42;
>>> + }
>>> + /* someone wrote to us, we should reload the timer */
>>> + da9052_wdt_strobe(da9052);
>>> + }
>>> + }
>>> + return count;
>>> +}
>>> +
>>> +static const struct file_operations da9052_wdt_fops = {
>>> + .owner = THIS_MODULE,
>>> + .llseek = no_llseek,
>>> + .unlocked_ioctl = da9052_wdt_ioctl,
>>> + .write = da9052_wdt_write,
>>> + .open = da9052_wdt_open,
>>> + .release = da9052_wdt_release,
>>> +};
>>> +
>>> +static struct miscdevice da9052_wdt_miscdev = {
>>> + .minor = WATCHDOG_MINOR,
>>> + .name = "da9052-wdt",
>>> + .fops = &da9052_wdt_fops,
>>> +};
>>> +
>>> +static int __devinit da9052_wdt_probe(struct platform_device *pdev)
>>> +{
>>> + int ret;
>>> +
>>> + da9052 = dev_get_drvdata(pdev->dev.parent);
>>> +
>>> + ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
>>> + DA9052_CONTROLD_TWDSCALE, 0);
>>> + if (ret < 0) {
>>> + dev_err(&pdev->dev, "Failed to disable watchdog bits, %d\n",
>>> + ret);
>>> + return ret;
>>> + }
>>> +
>>> + da9052_wdt_miscdev.parent = &pdev->dev;
>>> +
>>> + ret = misc_register(&da9052_wdt_miscdev);
Could we move to watchdog registration instead of the misc one ?
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static int __devexit da9052_wdt_remove(struct platform_device *dev)
>>> +{
>>> + misc_deregister(&da9052_wdt_miscdev);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static struct platform_driver da9052_wdt_driver = {
>>> + .probe = da9052_wdt_probe,
>>> + .remove = __devexit_p(da9052_wdt_remove),
>>> + .driver = {
>>> + .name = "da9052-watchdog",
>>> + .owner = THIS_MODULE,
>>> + },
>>> +};
>>> +
>>> +module_platform_driver(da9052_wdt_driver);
>>> +
>>> +MODULE_AUTHOR("David Dajun Chen <dchen@xxxxxxxxxxx>");
>>> +MODULE_DESCRIPTION("DA9052 SM Device Driver");
>>> +MODULE_LICENSE("GPL");
>>> +MODULE_ALIAS("platform:da9052-wdt");
>>>
>>>
>
>
> _______________________________________________
> linaro-dev mailing list
> linaro-dev@xxxxxxxxxxxxxxxx
> http://lists.linaro.org/mailman/listinfo/linaro-dev

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/