[PATCH v2 08/15] h8300: mark const init data with __initconst instead of __initdata

[Uwe Kleine-KÃnig]

As long as there is no other non-const variable marked __initdata in the
same compilation unit it doesn't hurt. If there were one however
compilation would fail with

	error: $variablename causes a section type conflict

because a section containing const variables is marked read only and so
cannot contain non-const variables.

Signed-off-by: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
Cc: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
---
no changes since (implict) v1

 arch/h8300/kernel/timer/itu.c     |    2 +-
 arch/h8300/kernel/timer/timer16.c |    2 +-
 arch/h8300/kernel/timer/timer8.c  |    2 +-
 arch/h8300/kernel/timer/tpu.c     |    2 +-
 arch/h8300/platform/h8300h/irq.c  |    4 ++--
 arch/h8300/platform/h8s/irq.c     |    4 ++--
 6 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/h8300/kernel/timer/itu.c b/arch/h8300/kernel/timer/itu.c
index a2ae5e9..2ab0e42 100644
--- a/arch/h8300/kernel/timer/itu.c
+++ b/arch/h8300/kernel/timer/itu.c
@@ -62,7 +62,7 @@ static struct irqaction itu_irq = {
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
 };
 
-static const int __initdata divide_rate[] = {1, 2, 4, 8};
+static const int divide_rate[] __initconst = {1, 2, 4, 8};
 
 void __init h8300_timer_setup(void)
 {
diff --git a/arch/h8300/kernel/timer/timer16.c b/arch/h8300/kernel/timer/timer16.c
index ae0d381..78f6843 100644
--- a/arch/h8300/kernel/timer/timer16.c
+++ b/arch/h8300/kernel/timer/timer16.c
@@ -57,7 +57,7 @@ static struct irqaction timer16_irq = {
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
 };
 
-static const int __initdata divide_rate[] = {1, 2, 4, 8};
+static const int divide_rate[] __initconst = {1, 2, 4, 8};
 
 void __init h8300_timer_setup(void)
 {
diff --git a/arch/h8300/kernel/timer/timer8.c b/arch/h8300/kernel/timer/timer8.c
index 7a1533f..ea4eb8d 100644
--- a/arch/h8300/kernel/timer/timer8.c
+++ b/arch/h8300/kernel/timer/timer8.c
@@ -77,7 +77,7 @@ static struct irqaction timer8_irq = {
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
 };
 
-static const int __initdata divide_rate[] = {8, 64, 8192};
+static const int divide_rate[] __initconst = {8, 64, 8192};
 
 void __init h8300_timer_setup(void)
 {
diff --git a/arch/h8300/kernel/timer/tpu.c b/arch/h8300/kernel/timer/tpu.c
index 2193a2e..eec62d8 100644
--- a/arch/h8300/kernel/timer/tpu.c
+++ b/arch/h8300/kernel/timer/tpu.c
@@ -66,7 +66,7 @@ static struct irqaction tpu_irq = {
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
 };
 
-static const int __initdata divide_rate[] = {
+static const int divide_rate[] __initconst = {
 #if CONFIG_H8300_TPU_CH == 0
 	1,4,16,64,0,0,0,0,
 #elif (CONFIG_H8300_TPU_CH == 1) || (CONFIG_H8300_TPU_CH == 5)
diff --git a/arch/h8300/platform/h8300h/irq.c b/arch/h8300/platform/h8300h/irq.c
index bc4f51b..a80e1a1 100644
--- a/arch/h8300/platform/h8300h/irq.c
+++ b/arch/h8300/platform/h8300h/irq.c
@@ -14,14 +14,14 @@
 #include <asm/gpio-internal.h>
 #include <asm/regs306x.h>
 
-const int __initdata h8300_saved_vectors[] = {
+const int h8300_saved_vectors[] __initconst = {
 #if defined(CONFIG_GDB_DEBUG)
 	TRAP3_VEC,	/* TRAPA #3 is GDB breakpoint */
 #endif
 	-1,
 };
 
-const h8300_vector __initdata h8300_trap_table[] = {
+const h8300_vector h8300_trap_table[] __initconst = {
 	0, 0, 0, 0, 0, 0, 0, 0,
 	system_call,
 	0,
diff --git a/arch/h8300/platform/h8s/irq.c b/arch/h8300/platform/h8s/irq.c
index 7b5f29f..362b191 100644
--- a/arch/h8300/platform/h8s/irq.c
+++ b/arch/h8300/platform/h8s/irq.c
@@ -18,7 +18,7 @@
 #include <asm/regs267x.h>
 
 /* saved vector list */
-const int __initdata h8300_saved_vectors[]={
+const int h8300_saved_vectors[] __initconst = {
 #if defined(CONFIG_GDB_DEBUG)
 	TRACE_VEC,
 	TRAP3_VEC,
@@ -27,7 +27,7 @@ const int __initdata h8300_saved_vectors[]={
 };
 
 /* trap entry table */
-const H8300_VECTOR __initdata h8300_trap_table[] = {
+const H8300_VECTOR h8300_trap_table[] __initconst = {
 	0,0,0,0,0,
 	trace_break,  /* TRACE */
 	0,0,
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/