I would like to propose the following addition to the 'IIO deviceWorks for me though the formatting of the above is somewhat different from
interface' for color light sensing devices to accommodate CCT (AKA color
temperature) and access to the raw RGB channel data for user analysis.
IIO channel type name: CCT
The CCT ABI should be documented similar to as follows:
In sys-bus-iio-light:
What: /sys/bus/iio/devices/device[n]/cct[_input|_raw]
KernelVersion: 3.3.0
Contact: linux-iio@xxxxxxxxxxxxxxx
Description:
This should return the correlated color temperature from
the RGBC color sensor
expressed as SI unit (degree kelvin).
If it comes back in SI units, it should also
include_input else it
should include _raw to signify it is not in SI units.
So these modifiers apply to intensity channels? Colour temp is built from
IIO modifiers:
IIO_MOD_LIGHT_RED
IIO_MOD_LIGHT_GREEN
IIO_MOD_LIGHT_BLUE
Fine with me.
The 'clear' and IR channels are already covered by the use of IIO_LIGHT
and IIO ILLUMINANCE (and respective modifiers).
The RGB modifiers will help to express the relative frequencies to their
respective channel, and appear to fit well with the overall convention.
And last but not least, the textual modifier names "red", "green", and
"blue" be accommodated within 'industrialio-core'.
Channel specific interrupt event / sources are not presented at this
time.
Any thoughts or comments are welcomed.
Jon Brenner
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html