[PATCH 28/37] atl1c: remove PHY polling from atl1c_open

[xiong]

PHY polling code for FPGA is considered in every MDIO R/W API.
no need to add additional code to atl1c_open.

Signed-off-by: xiong <xiong@xxxxxxxxxxxxxxxx>
Tested-by: Liu David <dwliu@xxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/atheros/atl1c/atl1c_main.c |    7 -------
 1 files changed, 0 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index a85f2af..e43f42f 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -2272,13 +2272,6 @@ static int atl1c_open(struct net_device *netdev)
 	if (unlikely(err))
 		goto err_up;
 
-	if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) {
-		u32 phy_data;
-
-		AT_READ_REG(&adapter->hw, REG_MDIO_CTRL, &phy_data);
-		phy_data |= MDIO_CTRL_AP_EN;
-		AT_WRITE_REG(&adapter->hw, REG_MDIO_CTRL, phy_data);
-	}
 	return 0;
 
 err_up:
-- 
1.7.7

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/