[PATCH] tty/serial/pmac_zilog: Fix "nobody cared" IRQ message

[Larry Finger]

Following commit a79dd5a titled "tty/serial/pmac_zilog: Fix suspend & resume",
my Powerbook G4 Titanium showed the following stack dump:

[   36.878225] irq 23: nobody cared (try booting with the "irqpoll" option)
[   36.878251] Call Trace:
[   36.878291] [dfff3f00] [c000984c] show_stack+0x7c/0x194 (unreliable)
[   36.878322] [dfff3f40] [c00a6868] __report_bad_irq+0x44/0xf4
[   36.878339] [dfff3f60] [c00a6b04] note_interrupt+0x1ec/0x2ac
[   36.878356] [dfff3f80] [c00a48d0] handle_irq_event_percpu+0x250/0x2b8
[   36.878372] [dfff3fd0] [c00a496c] handle_irq_event+0x34/0x54
[   36.878389] [dfff3fe0] [c00a753c] handle_fasteoi_irq+0xb4/0x124
[   36.878412] [dfff3ff0] [c000f5bc] call_handle_irq+0x18/0x28
[   36.878428] [deef1f10] [c000719c] do_IRQ+0x114/0x1cc
[   36.878446] [deef1f40] [c0015868] ret_from_except+0x0/0x1c
[   36.878484] --- Exception: 501 at 0xf497610
[   36.878489]     LR = 0xfdc3dd0
[   36.878497] handlers:
[   36.878510] [<c02b7424>] pmz_interrupt
[   36.878520] Disabling IRQ #23

From an E-mail exchange about this problem, Andreas Schwab noticed a typo
that resulted in the wrong condition being tested.

The patch also corrects 2 typos that incorrectly report why an error branch
is being taken.

Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
---

Ben,

Any changes you wish to make in the commit message are OK with me.

Larry
---

Index: wireless-testing/drivers/tty/serial/pmac_zilog.c
===================================================================
--- wireless-testing.orig/drivers/tty/serial/pmac_zilog.c	2012-04-28 
15:51:38.843723074 -0500
+++ wireless-testing/drivers/tty/serial/pmac_zilog.c	2012-04-28 
18:34:34.053900600 -0500
@@ -469,7 +469,7 @@
 	tty = NULL;
 	if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
 		if (!ZS_IS_OPEN(uap_a)) {
-			pmz_debug("ChanA interrupt while open !\n");
+			pmz_debug("ChanA interrupt while not open !\n");
 			goto skip_a;
 		}
 		write_zsreg(uap_a, R0, RES_H_IUS);
@@ -493,8 +493,8 @@
 	spin_lock(&uap_b->port.lock);
 	tty = NULL;
 	if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
-		if (!ZS_IS_OPEN(uap_a)) {
-			pmz_debug("ChanB interrupt while open !\n");
+		if (!ZS_IS_OPEN(uap_b)) {
+			pmz_debug("ChanB interrupt while not open !\n");
 			goto skip_b;
 		}
 		write_zsreg(uap_b, R0, RES_H_IUS);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/