[PATCH] MFD : add MAX77686 mfd driver
From: Jonghwa Lee
Date: Mon Apr 30 2012 - 04:53:48 EST
From: Chiwoong byun <woong.byun@xxxxxxxxxxx>
This driver is for MAXIM 77686 mfd chip.
It contains RTC, PMIC on it.
They share same I2C bus and included in this mfd driver.
Signed-off-by: Jonghwa Lee <jonghwa3.lee@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
Signed-off-by: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
---
drivers/mfd/Kconfig | 11 +
drivers/mfd/Makefile | 1 +
drivers/mfd/max77686-irq.c | 343 ++++++++++++++++++++++++++++
drivers/mfd/max77686.c | 407 ++++++++++++++++++++++++++++++++++
include/linux/mfd/max77686-private.h | 259 +++++++++++++++++++++
include/linux/mfd/max77686.h | 137 ++++++++++++
6 files changed, 1158 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/max77686-irq.c
create mode 100644 drivers/mfd/max77686.c
create mode 100644 include/linux/mfd/max77686-private.h
create mode 100644 include/linux/mfd/max77686.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 13a1789..998356f 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -441,6 +441,17 @@ config MFD_MAX8998
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_MAX77686
+ bool "Maxim Semiconductor MAX77686 PMIC Support"
+ depends on I2C=y && GENERIC_HARDIRQS
+ select MFD_CORE
+ help
+ Say yes here to support for Maxim Semiconductor MAX77686.
+ This is a Power Management IC with RTC on chip.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_S5M_CORE
bool "SAMSUNG S5M Series Support"
depends on I2C=y && GENERIC_HARDIRQS
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index ddd9fa7..d93a7a6 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -80,6 +80,7 @@ obj-$(CONFIG_MFD_MAX8925) += max8925.o
obj-$(CONFIG_MFD_MAX8997) += max8997.o max8997-irq.o
obj-$(CONFIG_MFD_MAX8998) += max8998.o max8998-irq.o
obj-$(CONFIG_MFD_MAX77693) += max77693.o max77693-irq.o
+obj-$(CONFIG_MFD_MAX77693) += max77686.o max77686-irq.o
pcf50633-objs := pcf50633-core.o pcf50633-irq.o
obj-$(CONFIG_MFD_PCF50633) += pcf50633.o
diff --git a/drivers/mfd/max77686-irq.c b/drivers/mfd/max77686-irq.c
new file mode 100644
index 0000000..c086da3
--- /dev/null
+++ b/drivers/mfd/max77686-irq.c
@@ -0,0 +1,343 @@
+/*
+ * max77686-irq.c - Interrupt controller support for MAX77686
+ *
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Chiwoong Byun <woong.byun@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * This driver is based on max8997-irq.c
+ */
+
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/mfd/max77686.h>
+#include <linux/mfd/max77686-private.h>
+
+#undef MAX77686_IRQ_TEST
+
+enum {
+ MAX77686_DEBUG_IRQ_INFO = 1 << 0,
+ MAX77686_DEBUG_IRQ_MASK = 1 << 1,
+ MAX77686_DEBUG_IRQ_INT = 1 << 2,
+};
+
+static int debug_mask = MAX77686_DEBUG_IRQ_INFO | MAX77686_DEBUG_IRQ_MASK |
+ MAX77686_DEBUG_IRQ_INT;
+
+static const u8 max77686_mask_reg[] = {
+ [PMIC_INT1] = MAX77686_REG_INT1MSK,
+ [PMIC_INT2] = MAX77686_REG_INT2MSK,
+ [RTC_INT] = MAX77686_RTC_INTM,
+};
+
+static struct i2c_client *max77686_get_i2c(struct max77686_dev *max77686,
+ enum max77686_irq_source src)
+{
+ switch (src) {
+ case PMIC_INT1 ... PMIC_INT2:
+ return max77686->i2c;
+ case RTC_INT:
+ return max77686->rtc;
+ default:
+ return ERR_PTR(-EINVAL);
+ }
+}
+
+struct max77686_irq_data {
+ int mask;
+ enum max77686_irq_source group;
+};
+
+static const struct max77686_irq_data max77686_irqs[] = {
+ [MAX77686_PMICIRQ_PWRONF] = { .group = PMIC_INT1, .mask = 1 << 0 },
+ [MAX77686_PMICIRQ_PWRONR] = { .group = PMIC_INT1, .mask = 1 << 1 },
+ [MAX77686_PMICIRQ_JIGONBF] = { .group = PMIC_INT1, .mask = 1 << 2 },
+ [MAX77686_PMICIRQ_JIGONBR] = { .group = PMIC_INT1, .mask = 1 << 3 },
+ [MAX77686_PMICIRQ_ACOKBF] = { .group = PMIC_INT1, .mask = 1 << 4 },
+ [MAX77686_PMICIRQ_ACOKBR] = { .group = PMIC_INT1, .mask = 1 << 5 },
+ [MAX77686_PMICIRQ_ONKEY1S] = { .group = PMIC_INT1, .mask = 1 << 6 },
+ [MAX77686_PMICIRQ_MRSTB] = { .group = PMIC_INT1, .mask = 1 << 7 },
+ [MAX77686_PMICIRQ_140C] = { .group = PMIC_INT2, .mask = 1 << 0 },
+ [MAX77686_PMICIRQ_120C] = { .group = PMIC_INT2, .mask = 1 << 1 },
+ [MAX77686_RTCIRQ_RTC60S] = { .group = RTC_INT, .mask = 1 << 0 },
+ [MAX77686_RTCIRQ_RTCA1] = { .group = RTC_INT, .mask = 1 << 1 },
+ [MAX77686_RTCIRQ_RTCA2] = { .group = RTC_INT, .mask = 1 << 2 },
+ [MAX77686_RTCIRQ_SMPL] = { .group = RTC_INT, .mask = 1 << 3 },
+ [MAX77686_RTCIRQ_RTC1S] = { .group = RTC_INT, .mask = 1 << 4 },
+ [MAX77686_RTCIRQ_WTSR] = { .group = RTC_INT, .mask = 1 << 5 },
+};
+
+static void max77686_irq_lock(struct irq_data *data)
+{
+ struct max77686_dev *max77686 = irq_get_chip_data(data->irq);
+
+ if (debug_mask & MAX77686_DEBUG_IRQ_MASK)
+ pr_debug("%s\n", __func__);
+
+ mutex_lock(&max77686->irqlock);
+}
+
+static void max77686_irq_sync_unlock(struct irq_data *data)
+{
+ struct max77686_dev *max77686 = irq_get_chip_data(data->irq);
+ int i;
+
+ for (i = 0; i < MAX77686_IRQ_GROUP_NR; i++) {
+ u8 mask_reg = max77686_mask_reg[i];
+ struct i2c_client *i2c = max77686_get_i2c(max77686, i);
+
+ if (debug_mask & MAX77686_DEBUG_IRQ_MASK)
+ pr_debug("%s: mask_reg[%d]=0x%x, cur=0x%x\n", __func__,
+ i, mask_reg, max77686->irq_masks_cur[i]);
+
+ if (mask_reg == MAX77686_REG_INVALID ||
+ IS_ERR_OR_NULL(i2c))
+ continue;
+
+ max77686->irq_masks_cache[i] = max77686->irq_masks_cur[i];
+
+ max77686_write_reg(i2c, max77686_mask_reg[i],
+ max77686->irq_masks_cur[i]);
+ }
+
+ mutex_unlock(&max77686->irqlock);
+}
+
+static const inline struct max77686_irq_data *
+irq_to_max77686_irq(struct max77686_dev *max77686, int irq)
+{
+ return &max77686_irqs[irq - max77686->irq_base];
+}
+
+static void max77686_irq_mask(struct irq_data *data)
+{
+ struct max77686_dev *max77686 = irq_get_chip_data(data->irq);
+ const struct max77686_irq_data *irq_data = irq_to_max77686_irq(max77686,
+ data->irq);
+
+ max77686->irq_masks_cur[irq_data->group] |= irq_data->mask;
+
+ if (debug_mask & MAX77686_DEBUG_IRQ_MASK)
+ pr_info("%s: group=%d, cur=0x%x\n",
+ __func__, irq_data->group,
+ max77686->irq_masks_cur[irq_data->group]);
+}
+
+static void max77686_irq_unmask(struct irq_data *data)
+{
+ struct max77686_dev *max77686 = irq_get_chip_data(data->irq);
+ const struct max77686_irq_data *irq_data = irq_to_max77686_irq(max77686,
+ data->irq);
+
+ max77686->irq_masks_cur[irq_data->group] &= ~irq_data->mask;
+
+ if (debug_mask & MAX77686_DEBUG_IRQ_MASK)
+ pr_info("%s: group=%d, cur=0x%x\n",
+ __func__, irq_data->group,
+ max77686->irq_masks_cur[irq_data->group]);
+}
+
+static struct irq_chip max77686_irq_chip = {
+ .name = "max77686",
+ .irq_bus_lock = max77686_irq_lock,
+ .irq_bus_sync_unlock = max77686_irq_sync_unlock,
+ .irq_mask = max77686_irq_mask,
+ .irq_unmask = max77686_irq_unmask,
+};
+
+static irqreturn_t max77686_irq_thread(int irq, void *data)
+{
+ struct max77686_dev *max77686 = data;
+ u8 irq_reg[MAX77686_IRQ_GROUP_NR] = {};
+ u8 irq_src;
+ int ret;
+ int i;
+
+ ret = max77686_read_reg(max77686->i2c, MAX77686_REG_INTSRC, &irq_src);
+ if (ret < 0) {
+ dev_err(max77686->dev, "Failed to read interrupt source: %d\n",
+ ret);
+ return IRQ_NONE;
+ }
+
+ if (debug_mask & MAX77686_DEBUG_IRQ_INT)
+ pr_info("%s: irq_src=0x%x\n", __func__, irq_src);
+
+ /* MAX77686_IRQSRC_RTC may be set even if there are pending at INT1/2 */
+ ret = max77686_read_reg(max77686->i2c, MAX77686_REG_INT1, &irq_reg[0]);
+ ret = max77686_read_reg(max77686->i2c, MAX77686_REG_INT2, &irq_reg[1]);
+ if (ret < 0) {
+ dev_err(max77686->dev, "Failed to read pmic interrupt: %d\n",
+ ret);
+ return IRQ_NONE;
+ }
+
+ if (debug_mask & MAX77686_DEBUG_IRQ_INT)
+ pr_info("%s: int1=0x%x, int2=0x%x\n",
+ __func__, irq_reg[PMIC_INT1], irq_reg[PMIC_INT2]);
+
+ if (irq_src & MAX77686_IRQSRC_RTC) {
+#ifdef CONFIG_RTC_DRV_MAX77686
+ ret = max77686_read_reg(max77686->rtc, MAX77686_RTC_INT,
+ &irq_reg[RTC_INT]);
+#else
+ ret = -ENODEV;
+#endif
+ if (ret < 0) {
+ dev_err(max77686->dev, "Failed to read rtc interrupt: %d\n",
+ ret);
+ return IRQ_NONE;
+ }
+
+ if (debug_mask & MAX77686_DEBUG_IRQ_INT)
+ pr_info("%s: rtc int=0x%x\n", __func__,
+ irq_reg[RTC_INT]);
+ }
+
+ for (i = 0; i < MAX77686_IRQ_NR; i++) {
+ if (irq_reg[max77686_irqs[i].group] & max77686_irqs[i].mask)
+ handle_nested_irq(max77686->irq_base + i);
+ }
+
+ return IRQ_HANDLED;
+}
+
+int max77686_irq_resume(struct max77686_dev *max77686)
+{
+ if (max77686->irq && max77686->irq_base)
+ max77686_irq_thread(max77686->irq_base, max77686);
+ return 0;
+}
+
+int max77686_irq_init(struct max77686_dev *max77686)
+{
+ int i;
+ int cur_irq;
+ int ret;
+ int val;
+#ifdef MAX77686_IRQ_TEST
+ u8 irq_reg[6] = { };
+ u8 irq_src;
+#endif
+
+ if (debug_mask & MAX77686_DEBUG_IRQ_INFO)
+ pr_info("%s+\n", __func__);
+
+ if (!max77686->irq_gpio) {
+ dev_warn(max77686->dev, "No interrupt gpio specified.\n");
+ max77686->irq_base = 0;
+ return 0;
+ }
+
+ if (!max77686->irq_base) {
+ dev_err(max77686->dev, "No interrupt base specified.\n");
+ return 0;
+ }
+
+ mutex_init(&max77686->irqlock);
+
+ max77686->irq = gpio_to_irq(max77686->irq_gpio);
+ ret = gpio_request(max77686->irq_gpio, "pmic_irq");
+ if (ret < 0 && ret != -EBUSY) {
+ dev_err(max77686->dev,
+ "Failed to request gpio %d with ret: %d\n",
+ max77686->irq_gpio, ret);
+ return IRQ_NONE;
+ }
+ if (ret == -EBUSY)
+ dev_warn(max77686->dev, "gpio pmic_irq is already requested\n");
+
+ gpio_direction_input(max77686->irq_gpio);
+ val = gpio_get_value(max77686->irq_gpio);
+ gpio_free(max77686->irq_gpio);
+
+ if (debug_mask & MAX77686_DEBUG_IRQ_INT)
+ pr_info("%s: gpio_irq=%x\n", __func__, val);
+
+#ifdef MAX77686_IRQ_TEST
+ ret = max77686_read_reg(max77686->i2c, MAX77686_REG_INTSRC, &irq_src);
+ if (ret < 0) {
+ dev_err(max77686->dev, "Failed to read interrupt source: %d\n",
+ ret);
+ return IRQ_NONE;
+ }
+
+ pr_info("%s: irq_src=0x%x\n", __func__, irq_src);
+
+ ret = max77686_bulk_read(max77686->i2c, MAX77686_REG_INT1, 6, irq_reg);
+ if (ret < 0) {
+ dev_err(max77686->dev, "Failed to read interrupt source: %d\n",
+ ret);
+ return IRQ_NONE;
+ }
+
+ for (i = 0; i < 6; i++)
+ pr_info("%s: i[%d]=0x%x\n", __func__, i, irq_reg[i]);
+#endif /* MAX77686_IRQ_TEST */
+
+ /* Mask individual interrupt sources */
+ for (i = 0; i < MAX77686_IRQ_GROUP_NR; i++) {
+ struct i2c_client *i2c;
+
+ max77686->irq_masks_cur[i] = 0xff;
+ max77686->irq_masks_cache[i] = 0xff;
+ i2c = max77686_get_i2c(max77686, i);
+
+ if (IS_ERR_OR_NULL(i2c))
+ continue;
+ if (max77686_mask_reg[i] == MAX77686_REG_INVALID)
+ continue;
+
+ max77686_write_reg(i2c, max77686_mask_reg[i], 0xff);
+ }
+
+ /* Register with genirq */
+ for (i = 0; i < MAX77686_IRQ_NR; i++) {
+ cur_irq = i + max77686->irq_base;
+ irq_set_chip_data(cur_irq, max77686);
+ irq_set_chip_and_handler(cur_irq, &max77686_irq_chip,
+ handle_edge_irq);
+ irq_set_nested_thread(cur_irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(cur_irq, IRQF_VALID);
+#else
+ irq_set_noprobe(cur_irq);
+#endif
+ }
+
+ ret = request_threaded_irq(max77686->irq, NULL, max77686_irq_thread,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "max77686-irq", max77686);
+
+ if (ret) {
+ dev_err(max77686->dev, "Failed to request IRQ %d: %d\n",
+ max77686->irq, ret);
+ return ret;
+ }
+
+ if (debug_mask & MAX77686_DEBUG_IRQ_INFO)
+ pr_info("%s-\n", __func__);
+
+ return 0;
+}
+
+void max77686_irq_exit(struct max77686_dev *max77686)
+{
+ if (max77686->irq)
+ free_irq(max77686->irq, max77686);
+}
diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c
new file mode 100644
index 0000000..77b325c
--- /dev/null
+++ b/drivers/mfd/max77686.c
@@ -0,0 +1,407 @@
+/*
+ * max77686.c - mfd core driver for the Maxim 77686
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Chiwoong Byun <woong.byun@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * This driver is based on max8997.c
+ */
+
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+#include <linux/mutex.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max77686.h>
+#include <linux/mfd/max77686-private.h>
+#include <linux/interrupt.h>
+
+#define I2C_ADDR_RTC (0x0C >> 1)
+
+static struct mfd_cell max77686_devs[] = {
+ { .name = "max77686-pmic", },
+#ifdef CONFIG_RTC_DRV_MAX77686
+ { .name = "max77686-rtc", },
+#endif
+};
+
+int max77686_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest)
+{
+ struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
+ int ret;
+
+ mutex_lock(&max77686->iolock);
+ ret = i2c_smbus_read_byte_data(i2c, reg);
+ mutex_unlock(&max77686->iolock);
+ if (ret < 0)
+ return ret;
+
+ ret &= 0xff;
+ *dest = ret;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max77686_read_reg);
+
+int max77686_bulk_read(struct i2c_client *i2c, u8 reg, int count, u8 *buf)
+{
+ struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
+ int ret;
+
+ mutex_lock(&max77686->iolock);
+ ret = i2c_smbus_read_i2c_block_data(i2c, reg, count, buf);
+ mutex_unlock(&max77686->iolock);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max77686_bulk_read);
+
+int max77686_write_reg(struct i2c_client *i2c, u8 reg, u8 value)
+{
+ struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
+ int ret;
+
+ mutex_lock(&max77686->iolock);
+ ret = i2c_smbus_write_byte_data(i2c, reg, value);
+ mutex_unlock(&max77686->iolock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(max77686_write_reg);
+
+int max77686_bulk_write(struct i2c_client *i2c, u8 reg, int count, u8 *buf)
+{
+ struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
+ int ret;
+
+ mutex_lock(&max77686->iolock);
+ ret = i2c_smbus_write_i2c_block_data(i2c, reg, count, buf);
+ mutex_unlock(&max77686->iolock);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max77686_bulk_write);
+
+int max77686_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
+{
+ struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
+ int ret;
+
+ mutex_lock(&max77686->iolock);
+ ret = i2c_smbus_read_byte_data(i2c, reg);
+ if (ret >= 0) {
+ u8 old_val = ret & 0xff;
+ u8 new_val = (val & mask) | (old_val & (~mask));
+ ret = i2c_smbus_write_byte_data(i2c, reg, new_val);
+ }
+ mutex_unlock(&max77686->iolock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(max77686_update_reg);
+
+static int max77686_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct max77686_dev *max77686;
+ struct max77686_platform_data *pdata = i2c->dev.platform_data;
+ u8 data;
+ int ret = 0;
+
+ max77686 = kzalloc(sizeof(struct max77686_dev), GFP_KERNEL);
+ if (max77686 == NULL)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, max77686);
+ max77686->dev = &i2c->dev;
+ max77686->i2c = i2c;
+ max77686->type = id->driver_data;
+
+ if (!pdata) {
+ ret = -EIO;
+ goto err;
+ }
+
+ max77686->wakeup = pdata->wakeup;
+ max77686->irq_gpio = pdata->irq_gpio;
+ max77686->irq_base = pdata->irq_base;
+ max77686->wtsr_smpl = pdata->wtsr_smpl;
+
+ mutex_init(&max77686->iolock);
+
+ if (max77686_read_reg(i2c, MAX77686_REG_DEVICE_ID, &data) < 0) {
+ dev_err(max77686->dev,
+ "device not found on this channel (this is not an error)\n");
+ ret = -ENODEV;
+ goto err;
+ } else
+ dev_info(max77686->dev, "device found\n");
+
+#ifdef CONFIG_RTC_DRV_MAX77686
+ max77686->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
+ i2c_set_clientdata(max77686->rtc, max77686);
+#endif
+
+ max77686_irq_init(max77686);
+
+ ret = mfd_add_devices(max77686->dev, -1, max77686_devs,
+ ARRAY_SIZE(max77686_devs), NULL, 0);
+
+ if (ret < 0)
+ goto err_mfd;
+
+ device_init_wakeup(max77686->dev, pdata->wakeup);
+
+ return ret;
+
+err_mfd:
+ mfd_remove_devices(max77686->dev);
+#ifdef CONFIG_RTC_DRV_MAX77686
+ i2c_unregister_device(max77686->rtc);
+#endif
+err:
+ kfree(max77686);
+ return ret;
+}
+
+static int max77686_i2c_remove(struct i2c_client *i2c)
+{
+ struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
+
+ mfd_remove_devices(max77686->dev);
+#ifdef CONFIG_RTC_DRV_MAX77686
+ i2c_unregister_device(max77686->rtc);
+#endif
+ kfree(max77686);
+
+ return 0;
+}
+
+static const struct i2c_device_id max77686_i2c_id[] = {
+ { "max77686", TYPE_MAX77686 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max77686_i2c_id);
+
+#ifdef CONFIG_PM
+static int max77686_suspend(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
+
+ disable_irq(max77686->irq);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(max77686->irq);
+
+ return 0;
+}
+
+static int max77686_resume(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(max77686->irq);
+
+ enable_irq(max77686->irq);
+
+ return max77686_irq_resume(max77686);
+}
+#else
+#define max77686_suspend NULL
+#define max77686_resume NULL
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_HIBERNATION
+
+u8 max77686_dumpaddr_pmic[] = {
+ MAX77686_REG_INT1MSK,
+ MAX77686_REG_INT2MSK,
+ MAX77686_REG_ONOFF_DELAY,
+ MAX77686_REG_MRSTB ,
+ /* Reserved: 0x0B-0x0F */
+ MAX77686_REG_BUCK1CTRL,
+ MAX77686_REG_BUCK1OUT,
+ MAX77686_REG_BUCK2CTRL1,
+ MAX77686_REG_BUCK234FREQ,
+ MAX77686_REG_BUCK2DVS1,
+ MAX77686_REG_BUCK2DVS2,
+ MAX77686_REG_BUCK2DVS3,
+ MAX77686_REG_BUCK2DVS4,
+ MAX77686_REG_BUCK2DVS5,
+ MAX77686_REG_BUCK2DVS6,
+ MAX77686_REG_BUCK2DVS7,
+ MAX77686_REG_BUCK2DVS8,
+ MAX77686_REG_BUCK3CTRL1,
+ /* Reserved: 0x1D */
+ MAX77686_REG_BUCK3DVS1,
+ MAX77686_REG_BUCK3DVS2,
+ MAX77686_REG_BUCK3DVS3,
+ MAX77686_REG_BUCK3DVS4,
+ MAX77686_REG_BUCK3DVS5,
+ MAX77686_REG_BUCK3DVS6,
+ MAX77686_REG_BUCK3DVS7,
+ MAX77686_REG_BUCK3DVS8,
+ MAX77686_REG_BUCK4CTRL1,
+ /* Reserved: 0x27 */
+ MAX77686_REG_BUCK4DVS1,
+ MAX77686_REG_BUCK4DVS2,
+ MAX77686_REG_BUCK4DVS3,
+ MAX77686_REG_BUCK4DVS4,
+ MAX77686_REG_BUCK4DVS5,
+ MAX77686_REG_BUCK4DVS6,
+ MAX77686_REG_BUCK4DVS7,
+ MAX77686_REG_BUCK4DVS8,
+ MAX77686_REG_BUCK5CTRL,
+ MAX77686_REG_BUCK5OUT,
+ MAX77686_REG_BUCK6CTRL,
+ MAX77686_REG_BUCK6OUT,
+ MAX77686_REG_BUCK7CTRL,
+ MAX77686_REG_BUCK7OUT,
+ MAX77686_REG_BUCK8CTRL,
+ MAX77686_REG_BUCK8OUT,
+ MAX77686_REG_BUCK9CTRL,
+ MAX77686_REG_BUCK9OUT,
+ /* Reserved: 0x3A-0x3F */
+ MAX77686_REG_LDO1CTRL1 ,
+ MAX77686_REG_LDO2CTRL1 ,
+ MAX77686_REG_LDO3CTRL1 ,
+ MAX77686_REG_LDO4CTRL1 ,
+ MAX77686_REG_LDO5CTRL1 ,
+ MAX77686_REG_LDO6CTRL1,
+ MAX77686_REG_LDO7CTRL1 ,
+ MAX77686_REG_LDO8CTRL1 ,
+ MAX77686_REG_LDO9CTRL1 ,
+ MAX77686_REG_LDO10CTRL1,
+ MAX77686_REG_LDO11CTRL1,
+ MAX77686_REG_LDO12CTRL1,
+ MAX77686_REG_LDO13CTRL1,
+ MAX77686_REG_LDO14CTRL1,
+ MAX77686_REG_LDO15CTRL1,
+ MAX77686_REG_LDO16CTRL1,
+ MAX77686_REG_LDO17CTRL1,
+ MAX77686_REG_LDO18CTRL1,
+ MAX77686_REG_LDO19CTRL1,
+ MAX77686_REG_LDO20CTRL1,
+ MAX77686_REG_LDO21CTRL1,
+ MAX77686_REG_LDO22CTRL1,
+ MAX77686_REG_LDO23CTRL1,
+ MAX77686_REG_LDO24CTRL1,
+ MAX77686_REG_LDO25CTRL1,
+ MAX77686_REG_LDO26CTRL1,
+ /* Reserved: 0x5A-0x5F */
+ MAX77686_REG_LDO1CTRL2 ,
+ MAX77686_REG_LDO2CTRL2 ,
+ MAX77686_REG_LDO3CTRL2 ,
+ MAX77686_REG_LDO4CTRL2 ,
+ MAX77686_REG_LDO5CTRL2 ,
+ MAX77686_REG_LDO6CTRL2,
+ MAX77686_REG_LDO7CTRL2 ,
+ MAX77686_REG_LDO8CTRL2 ,
+ MAX77686_REG_LDO9CTRL2 ,
+ MAX77686_REG_LDO10CTRL2,
+ MAX77686_REG_LDO11CTRL2,
+ MAX77686_REG_LDO12CTRL2,
+ MAX77686_REG_LDO13CTRL2,
+ MAX77686_REG_LDO14CTRL2,
+ MAX77686_REG_LDO15CTRL2,
+ MAX77686_REG_LDO16CTRL2,
+ MAX77686_REG_LDO17CTRL2,
+ MAX77686_REG_LDO18CTRL2,
+ MAX77686_REG_LDO19CTRL2,
+ MAX77686_REG_LDO20CTRL2,
+ MAX77686_REG_LDO21CTRL2,
+ MAX77686_REG_LDO22CTRL2,
+ MAX77686_REG_LDO23CTRL2,
+ MAX77686_REG_LDO24CTRL2,
+ MAX77686_REG_LDO25CTRL2,
+ MAX77686_REG_LDO26CTRL2,
+ MAX77686_REG_BBAT_CHG,
+ MAX77686_REG_32KHZ,
+};
+
+static int max77686_freeze(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(max77686_dumpaddr_pmic); i++)
+ max77686_read_reg(i2c, max77686_dumpaddr_pmic[i],
+ &max77686->reg_dump[i]);
+
+ disable_irq(max77686->irq);
+
+ return 0;
+}
+
+static int max77686_restore(struct device *dev)
+{
+ struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+ struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
+ int i;
+
+ enable_irq(max77686->irq);
+
+ for (i = 0; i < ARRAY_SIZE(max77686_dumpaddr_pmic); i++)
+ max77686_write_reg(i2c, max77686_dumpaddr_pmic[i],
+ max77686->reg_dump[i]);
+
+ return 0;
+}
+#endif
+
+const struct dev_pm_ops max77686_pm = {
+ .suspend = max77686_suspend,
+ .resume = max77686_resume,
+#ifdef CONFIG_HIBERNATION
+ .freeze = max77686_freeze,
+ .thaw = max77686_restore,
+ .restore = max77686_restore,
+#endif
+};
+
+static struct i2c_driver max77686_i2c_driver = {
+ .driver = {
+ .name = "max77686",
+ .owner = THIS_MODULE,
+ .pm = &max77686_pm,
+ },
+ .probe = max77686_i2c_probe,
+ .remove = max77686_i2c_remove,
+ .id_table = max77686_i2c_id,
+};
+
+static int __init max77686_i2c_init(void)
+{
+ return i2c_add_driver(&max77686_i2c_driver);
+}
+/* init early so consumer devices can complete system boot */
+subsys_initcall(max77686_i2c_init);
+
+static void __exit max77686_i2c_exit(void)
+{
+ i2c_del_driver(&max77686_i2c_driver);
+}
+module_exit(max77686_i2c_exit);
+
+MODULE_DESCRIPTION("MAXIM 77686 multi-function core driver");
+MODULE_AUTHOR("Chiwoong Byun <woong.byun@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/max77686-private.h b/include/linux/mfd/max77686-private.h
new file mode 100644
index 0000000..a44a743
--- /dev/null
+++ b/include/linux/mfd/max77686-private.h
@@ -0,0 +1,259 @@
+/*
+ * max77686.h - Voltage regulator driver for the Maxim 77686
+ *
+ * Copyright (C) 2012 Samsung Electrnoics
+ * Chiwoong Byun <woong.byun@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_MFD_MAX77686_PRIV_H
+#define __LINUX_MFD_MAX77686_PRIV_H
+
+#include <linux/i2c.h>
+
+#define MAX77686_REG_INVALID (0xff)
+
+enum max77686_pmic_reg {
+ MAX77686_REG_DEVICE_ID = 0x00,
+ MAX77686_REG_INTSRC = 0x01,
+ MAX77686_REG_INT1 = 0x02,
+ MAX77686_REG_INT2 = 0x03,
+
+ MAX77686_REG_INT1MSK = 0x04,
+ MAX77686_REG_INT2MSK = 0x05,
+
+ MAX77686_REG_STATUS1 = 0x06,
+ MAX77686_REG_STATUS2 = 0x07,
+
+ MAX77686_REG_PWRON = 0x08,
+ MAX77686_REG_ONOFF_DELAY = 0x09,
+ MAX77686_REG_MRSTB = 0x0A,
+ /* Reserved: 0x0B-0x0F */
+
+ MAX77686_REG_BUCK1CTRL = 0x10,
+ MAX77686_REG_BUCK1OUT = 0x11,
+ MAX77686_REG_BUCK2CTRL1 = 0x12,
+ MAX77686_REG_BUCK234FREQ = 0x13,
+ MAX77686_REG_BUCK2DVS1 = 0x14,
+ MAX77686_REG_BUCK2DVS2 = 0x15,
+ MAX77686_REG_BUCK2DVS3 = 0x16,
+ MAX77686_REG_BUCK2DVS4 = 0x17,
+ MAX77686_REG_BUCK2DVS5 = 0x18,
+ MAX77686_REG_BUCK2DVS6 = 0x19,
+ MAX77686_REG_BUCK2DVS7 = 0x1A,
+ MAX77686_REG_BUCK2DVS8 = 0x1B,
+ MAX77686_REG_BUCK3CTRL1 = 0x1C,
+ /* Reserved: 0x1D */
+ MAX77686_REG_BUCK3DVS1 = 0x1E,
+ MAX77686_REG_BUCK3DVS2 = 0x1F,
+ MAX77686_REG_BUCK3DVS3 = 0x20,
+ MAX77686_REG_BUCK3DVS4 = 0x21,
+ MAX77686_REG_BUCK3DVS5 = 0x22,
+ MAX77686_REG_BUCK3DVS6 = 0x23,
+ MAX77686_REG_BUCK3DVS7 = 0x24,
+ MAX77686_REG_BUCK3DVS8 = 0x25,
+ MAX77686_REG_BUCK4CTRL1 = 0x26,
+ /* Reserved: 0x27 */
+ MAX77686_REG_BUCK4DVS1 = 0x28,
+ MAX77686_REG_BUCK4DVS2 = 0x29,
+ MAX77686_REG_BUCK4DVS3 = 0x2A,
+ MAX77686_REG_BUCK4DVS4 = 0x2B,
+ MAX77686_REG_BUCK4DVS5 = 0x2C,
+ MAX77686_REG_BUCK4DVS6 = 0x2D,
+ MAX77686_REG_BUCK4DVS7 = 0x2E,
+ MAX77686_REG_BUCK4DVS8 = 0x2F,
+ MAX77686_REG_BUCK5CTRL = 0x30,
+ MAX77686_REG_BUCK5OUT = 0x31,
+ MAX77686_REG_BUCK6CTRL = 0x32,
+ MAX77686_REG_BUCK6OUT = 0x33,
+ MAX77686_REG_BUCK7CTRL = 0x34,
+ MAX77686_REG_BUCK7OUT = 0x35,
+ MAX77686_REG_BUCK8CTRL = 0x36,
+ MAX77686_REG_BUCK8OUT = 0x37,
+ MAX77686_REG_BUCK9CTRL = 0x38,
+ MAX77686_REG_BUCK9OUT = 0x39,
+ /* Reserved: 0x3A-0x3F */
+
+ MAX77686_REG_LDO1CTRL1 = 0x40,
+ MAX77686_REG_LDO2CTRL1 = 0x41,
+ MAX77686_REG_LDO3CTRL1 = 0x42,
+ MAX77686_REG_LDO4CTRL1 = 0x43,
+ MAX77686_REG_LDO5CTRL1 = 0x44,
+ MAX77686_REG_LDO6CTRL1 = 0x45,
+ MAX77686_REG_LDO7CTRL1 = 0x46,
+ MAX77686_REG_LDO8CTRL1 = 0x47,
+ MAX77686_REG_LDO9CTRL1 = 0x48,
+ MAX77686_REG_LDO10CTRL1 = 0x49,
+ MAX77686_REG_LDO11CTRL1 = 0x4A,
+ MAX77686_REG_LDO12CTRL1 = 0x4B,
+ MAX77686_REG_LDO13CTRL1 = 0x4C,
+ MAX77686_REG_LDO14CTRL1 = 0x4D,
+ MAX77686_REG_LDO15CTRL1 = 0x4E,
+ MAX77686_REG_LDO16CTRL1 = 0x4F,
+ MAX77686_REG_LDO17CTRL1 = 0x50,
+ MAX77686_REG_LDO18CTRL1 = 0x51,
+ MAX77686_REG_LDO19CTRL1 = 0x52,
+ MAX77686_REG_LDO20CTRL1 = 0x53,
+ MAX77686_REG_LDO21CTRL1 = 0x54,
+ MAX77686_REG_LDO22CTRL1 = 0x55,
+ MAX77686_REG_LDO23CTRL1 = 0x56,
+ MAX77686_REG_LDO24CTRL1 = 0x57,
+ MAX77686_REG_LDO25CTRL1 = 0x58,
+ MAX77686_REG_LDO26CTRL1 = 0x59,
+ /* Reserved: 0x5A-0x5F */
+ MAX77686_REG_LDO1CTRL2 = 0x60,
+ MAX77686_REG_LDO2CTRL2 = 0x61,
+ MAX77686_REG_LDO3CTRL2 = 0x62,
+ MAX77686_REG_LDO4CTRL2 = 0x63,
+ MAX77686_REG_LDO5CTRL2 = 0x64,
+ MAX77686_REG_LDO6CTRL2 = 0x65,
+ MAX77686_REG_LDO7CTRL2 = 0x66,
+ MAX77686_REG_LDO8CTRL2 = 0x67,
+ MAX77686_REG_LDO9CTRL2 = 0x68,
+ MAX77686_REG_LDO10CTRL2 = 0x69,
+ MAX77686_REG_LDO11CTRL2 = 0x6A,
+ MAX77686_REG_LDO12CTRL2 = 0x6B,
+ MAX77686_REG_LDO13CTRL2 = 0x6C,
+ MAX77686_REG_LDO14CTRL2 = 0x6D,
+ MAX77686_REG_LDO15CTRL2 = 0x6E,
+ MAX77686_REG_LDO16CTRL2 = 0x6F,
+ MAX77686_REG_LDO17CTRL2 = 0x70,
+ MAX77686_REG_LDO18CTRL2 = 0x71,
+ MAX77686_REG_LDO19CTRL2 = 0x72,
+ MAX77686_REG_LDO20CTRL2 = 0x73,
+ MAX77686_REG_LDO21CTRL2 = 0x74,
+ MAX77686_REG_LDO22CTRL2 = 0x75,
+ MAX77686_REG_LDO23CTRL2 = 0x76,
+ MAX77686_REG_LDO24CTRL2 = 0x77,
+ MAX77686_REG_LDO25CTRL2 = 0x78,
+ MAX77686_REG_LDO26CTRL2 = 0x79,
+ /* Reserved: 0x7A-0x7D */
+
+ MAX77686_REG_BBAT_CHG = 0x7E,
+ MAX77686_REG_32KHZ = 0x7F,
+
+ MAX77686_REG_PMIC_END = 0x80,
+};
+
+enum max77686_rtc_reg {
+ MAX77686_RTC_INT = 0x00,
+ MAX77686_RTC_INTM = 0x01,
+ MAX77686_RTC_CONTROLM = 0x02,
+ MAX77686_RTC_CONTROL = 0x03,
+ MAX77686_RTC_UPDATE0 = 0x04,
+ /* Reserved: 0x5 */
+ MAX77686_WTSR_SMPL_CNTL = 0x06,
+ MAX77686_RTC_SEC = 0x07,
+ MAX77686_RTC_MIN = 0x08,
+ MAX77686_RTC_HOUR = 0x09,
+ MAX77686_RTC_WEEKDAY = 0x0A,
+ MAX77686_RTC_MONTH = 0x0B,
+ MAX77686_RTC_YEAR = 0x0C,
+ MAX77686_RTC_DATE = 0x0D,
+ MAX77686_ALARM1_SEC = 0x0E,
+ MAX77686_ALARM1_MIN = 0x0F,
+ MAX77686_ALARM1_HOUR = 0x10,
+ MAX77686_ALARM1_WEEKDAY = 0x11,
+ MAX77686_ALARM1_MONTH = 0x12,
+ MAX77686_ALARM1_YEAR = 0x13,
+ MAX77686_ALARM1_DATE = 0x14,
+ MAX77686_ALARM2_SEC = 0x15,
+ MAX77686_ALARM2_MIN = 0x16,
+ MAX77686_ALARM2_HOUR = 0x17,
+ MAX77686_ALARM2_WEEKDAY = 0x18,
+ MAX77686_ALARM2_MONTH = 0x19,
+ MAX77686_ALARM2_YEAR = 0x1A,
+ MAX77686_ALARM2_DATE = 0x1B,
+};
+
+#define MAX77686_IRQSRC_PMIC (0)
+#define MAX77686_IRQSRC_RTC (1 << 0)
+
+#define MAX77686_REG_RAMP_RATE_100MV (0x3<<6)
+#define MAX77686_REG_RAMP_RATE_55MV (0x2<<6)
+#define MAX77686_REG_RAMP_RATE_27MV (0x1<<6)
+#define MAX77686_REG_RAMP_RATE_13MV (0x0<<6)
+
+enum max77686_irq_source {
+ PMIC_INT1 = 0,
+ PMIC_INT2,
+ RTC_INT,
+
+ MAX77686_IRQ_GROUP_NR,
+};
+
+enum max77686_irq {
+ MAX77686_PMICIRQ_PWRONF,
+ MAX77686_PMICIRQ_PWRONR,
+ MAX77686_PMICIRQ_JIGONBF,
+ MAX77686_PMICIRQ_JIGONBR,
+ MAX77686_PMICIRQ_ACOKBF,
+ MAX77686_PMICIRQ_ACOKBR,
+ MAX77686_PMICIRQ_ONKEY1S,
+ MAX77686_PMICIRQ_MRSTB,
+
+ MAX77686_PMICIRQ_140C,
+ MAX77686_PMICIRQ_120C,
+
+ MAX77686_RTCIRQ_RTC60S,
+ MAX77686_RTCIRQ_RTCA1,
+ MAX77686_RTCIRQ_RTCA2,
+ MAX77686_RTCIRQ_SMPL,
+ MAX77686_RTCIRQ_RTC1S,
+ MAX77686_RTCIRQ_WTSR,
+
+ MAX77686_IRQ_NR,
+};
+
+struct max77686_dev {
+ struct device *dev;
+ struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */
+ struct i2c_client *rtc; /* slave addr 0x0c */
+ struct mutex iolock;
+
+ int type;
+
+ int irq;
+ int irq_gpio;
+ int irq_base;
+ bool wakeup;
+ struct mutex irqlock;
+ int irq_masks_cur[MAX77686_IRQ_GROUP_NR];
+ int irq_masks_cache[MAX77686_IRQ_GROUP_NR];
+ int wtsr_smpl;
+
+#ifdef CONFIG_HIBERNATION
+ u8 reg_dump[MAX77686_REG_PMIC_END];
+#endif
+};
+
+enum max77686_types {
+ TYPE_MAX77686,
+};
+
+extern int max77686_irq_init(struct max77686_dev *max77686);
+extern void max77686_irq_exit(struct max77686_dev *max77686);
+extern int max77686_irq_resume(struct max77686_dev *max77686);
+
+extern int max77686_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest);
+extern int max77686_bulk_read(struct i2c_client *i2c, u8 reg, int count,
+ u8 *buf);
+extern int max77686_write_reg(struct i2c_client *i2c, u8 reg, u8 value);
+extern int max77686_bulk_write(struct i2c_client *i2c, u8 reg, int count,
+ u8 *buf);
+extern int max77686_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask);
+
+#endif /* __LINUX_MFD_MAX77686_PRIV_H */
diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h
new file mode 100644
index 0000000..9dc81f0
--- /dev/null
+++ b/include/linux/mfd/max77686.h
@@ -0,0 +1,137 @@
+/*
+ * max77686.h - Driver for the Maxim 77686
+ *
+ * Copyright (C) 2012 Samsung Electrnoics
+ * Chiwoong Byun <woong.byun@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * This driver is based on max8997.h
+ *
+ * MAX77686 has PMIC, RTC devices.
+ * The devices share the same I2C bus and included in
+ * this mfd driver.
+ */
+
+#ifndef __LINUX_MFD_MAX77686_H
+#define __LINUX_MFD_MAX77686_H
+
+#include <linux/regulator/consumer.h>
+
+#define MAX77686_SMPL_ENABLE (0x1)
+#define MAX77686_WTSR_ENABLE (0x2)
+
+/* MAX77686 regulator IDs */
+enum max77686_regulators {
+ MAX77686_LDO1 = 0,
+ MAX77686_LDO2,
+ MAX77686_LDO3,
+ MAX77686_LDO4,
+ MAX77686_LDO5,
+ MAX77686_LDO6,
+ MAX77686_LDO7,
+ MAX77686_LDO8,
+ MAX77686_LDO9,
+ MAX77686_LDO10,
+ MAX77686_LDO11,
+ MAX77686_LDO12,
+ MAX77686_LDO13,
+ MAX77686_LDO14,
+ MAX77686_LDO15,
+ MAX77686_LDO16,
+ MAX77686_LDO17,
+ MAX77686_LDO18,
+ MAX77686_LDO19,
+ MAX77686_LDO20,
+ MAX77686_LDO21,
+ MAX77686_LDO22,
+ MAX77686_LDO23,
+ MAX77686_LDO24,
+ MAX77686_LDO25,
+ MAX77686_LDO26,
+ MAX77686_BUCK1,
+ MAX77686_BUCK2,
+ MAX77686_BUCK3,
+ MAX77686_BUCK4,
+ MAX77686_BUCK5,
+ MAX77686_BUCK6,
+ MAX77686_BUCK7,
+ MAX77686_BUCK8,
+ MAX77686_BUCK9,
+ MAX77686_EN32KHZ_AP,
+ MAX77686_EN32KHZ_CP,
+ MAX77686_P32KH,
+
+ MAX77686_REG_MAX,
+};
+
+struct max77686_regulator_data {
+ int id;
+ struct regulator_init_data *initdata;
+};
+
+enum max77686_opmode {
+ MAX77686_OPMODE_NORMAL,
+ MAX77686_OPMODE_LP,
+ MAX77686_OPMODE_STANDBY,
+};
+
+enum max77686_ramp_rate {
+ MAX77686_RAMP_RATE_100MV,
+ MAX77686_RAMP_RATE_13MV,
+ MAX77686_RAMP_RATE_27MV,
+ MAX77686_RAMP_RATE_55MV,
+};
+
+struct max77686_opmode_data {
+ int id;
+ int mode;
+};
+
+struct max77686_buck234_gpio_data {
+ int gpio;
+ int data;
+};
+
+struct max77686_platform_data {
+ /* IRQ */
+ int irq_gpio;
+ int irq_base;
+ int ono;
+ int wakeup;
+
+ /* ---- PMIC ---- */
+ struct max77686_regulator_data *regulators;
+ int num_regulators;
+ int has_full_constraints;
+
+ struct max77686_opmode_data *opmode_data;
+ int ramp_rate;
+ int wtsr_smpl;
+
+ /*
+ * GPIO-DVS feature is not enabled with the current version of
+ * MAX77686 driver. Buck2/3/4_voltages[0] is used as the default
+ * voltage at probe. DVS/SELB gpios are set as OUTPUT-LOW.
+ */
+ struct max77686_buck234_gpio_data buck234_gpio_dvs[3];
+ /* GPIO of [0]DVS1, [1]DVS2, [2]DVS3 */
+ int buck234_gpio_selb[3]; /* [0]SELB2, [1]SELB3, [2]SELB4 */
+ unsigned int buck2_voltage[8]; /* buckx_voltage in uV */
+ unsigned int buck3_voltage[8];
+ unsigned int buck4_voltage[8];
+};
+
+#endif /* __LINUX_MFD_MAX77686_H */
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/