[PATCH 3/3] usb: cp210x: Add ioctl for GPIO support

[Preston Fick]

This patch adds support for GPIO for CP210x devices that support it through two
IOCTLs to get or set the GPIO latch on a CP210x device. The specification for
this can be found in Silicon Labs AN571 document on section 5.27.1-4.

Signed-off-by: Preston Fick <preston.fick@xxxxxxxxxx>
---
 drivers/usb/serial/cp210x.c |   98 +++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 98 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index b3646b8..9d1e542 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -35,6 +35,8 @@
  */
 static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
 static void cp210x_close(struct usb_serial_port *);
+static int cp210x_ioctl(struct tty_struct *tty,
+	unsigned int cmd, unsigned long arg);
 static void cp210x_get_termios(struct tty_struct *,
 	struct usb_serial_port *port);
 static void cp210x_get_termios_port(struct usb_serial_port *port,
@@ -175,6 +177,7 @@ static struct usb_serial_driver cp210x_device = {
 	.bulk_out_size		= 256,
 	.open			= cp210x_open,
 	.close			= cp210x_close,
+	.ioctl			= cp210x_ioctl,
 	.break_ctl		= cp210x_break_ctl,
 	.set_termios		= cp210x_set_termios,
 	.tiocmget 		= cp210x_tiocmget,
@@ -195,6 +198,10 @@ static struct usb_serial_driver * const serial_drivers[] = {
 #define CP2104_PARTNUM		0x04
 #define CP2105_PARTNUM		0x05
 
+/* IOCTLs */
+#define IOCTL_GPIOGET		0x8000
+#define IOCTL_GPIOSET		0x8001
+
 /* Config request types */
 #define REQTYPE_HOST_TO_INTERFACE	0x41
 #define REQTYPE_INTERFACE_TO_HOST	0xc1
@@ -235,6 +242,8 @@ static struct usb_serial_driver * const serial_drivers[] = {
 #define UART_DISABLE		0x0000
 
 /* CP210X_VENDOR_SPECIFIC */
+#define CP210X_WRITE_LATCH	0x37E1
+#define CP210X_READ_LATCH	0x00C2
 #define CP210X_GET_PARTNUM	0x370B
 
 /* CP210X_(SET|GET)_BAUDDIV */
@@ -467,6 +476,95 @@ static void cp210x_close(struct usb_serial_port *port)
 	mutex_unlock(&port->serial->disc_mutex);
 }
 
+static int cp210x_ioctl(struct tty_struct *tty,
+	unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
+	int result = 0;
+	unsigned int latch_setting = 0;
+
+	switch (cmd) {
+
+	case IOCTL_GPIOGET:
+		if ((port_priv->bPartNumber == CP2103_PARTNUM) ||
+			(port_priv->bPartNumber == CP2104_PARTNUM)) {
+			result = usb_control_msg(port->serial->dev,
+					usb_rcvctrlpipe(port->serial->dev, 0),
+					CP210X_VENDOR_SPECIFIC,
+					REQTYPE_DEVICE_TO_HOST,
+					CP210X_READ_LATCH,
+					port_priv->bInterfaceNumber,
+					&latch_setting, 1,
+					USB_CTRL_GET_TIMEOUT);
+			if (result != 1)
+				return -EPROTO;
+			*(unsigned long *)arg = (unsigned long)latch_setting;
+			return 0;
+		} else if (port_priv->bPartNumber == CP2105_PARTNUM) {
+			result = usb_control_msg(port->serial->dev,
+					usb_rcvctrlpipe(port->serial->dev, 0),
+					CP210X_VENDOR_SPECIFIC,
+					REQTYPE_INTERFACE_TO_HOST,
+					CP210X_READ_LATCH,
+					port_priv->bInterfaceNumber,
+					&latch_setting, 1,
+					USB_CTRL_GET_TIMEOUT);
+			if (result != 1)
+				return -EPROTO;
+			*(unsigned long *)arg = (unsigned long)latch_setting;
+			return 0;
+		} else {
+			return -ENOTSUPP;
+		}
+		break;
+
+	case IOCTL_GPIOSET:
+		if ((port_priv->bPartNumber == CP2103_PARTNUM) ||
+			(port_priv->bPartNumber == CP2104_PARTNUM)) {
+			latch_setting =
+				*(unsigned int *)arg & 0x000000FF;
+			latch_setting |=
+				(*(unsigned int *)arg & 0x00FF0000) >> 8;
+			result = usb_control_msg(port->serial->dev,
+					usb_sndctrlpipe(port->serial->dev, 0),
+					CP210X_VENDOR_SPECIFIC,
+					REQTYPE_HOST_TO_DEVICE,
+					CP210X_WRITE_LATCH,
+					latch_setting,
+					NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+			if (result != 0)
+				return -EPROTO;
+			return 0;
+		} else if (port_priv->bPartNumber == CP2105_PARTNUM) {
+			latch_setting =
+				*(unsigned int *)arg & 0x000000FF;
+			latch_setting |=
+				(*(unsigned int *)arg & 0x00FF0000) >> 8;
+			result = usb_control_msg(port->serial->dev,
+					usb_sndctrlpipe(port->serial->dev, 0),
+					CP210X_VENDOR_SPECIFIC,
+					REQTYPE_HOST_TO_INTERFACE,
+					CP210X_WRITE_LATCH,
+					port_priv->bInterfaceNumber,
+					&latch_setting, 2,
+					USB_CTRL_SET_TIMEOUT);
+			if (result != 2)
+				return -EPROTO;
+			return 0;
+		} else {
+			return -ENOTSUPP;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	return -ENOIOCTLCMD;
+}
+
 /*
  * cp210x_get_termios
  * Reads the baud rate, data bits, parity, stop bits and flow control mode
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/