[PATCH v16 01/10]USB/ppc4xx: Add Synopsys DWC OTG Register definitions
From: Rupjyoti Sarmah
Date: Thu May 03 2012 - 08:50:23 EST
Add Synopsys Design Ware core register definitions.
Signed-off-by: Rupjyoti Sarmah <rsarmah@xxxxxxx>
Signed-off-by: Tirumala R Marri <tmarri@xxxxxxx>
Signed-off-by: Fushen Chen <fchen@xxxxxxx>
Signed-off-by: Mark Miesfeld <mmiesfeld@xxxxxxx>
---
drivers/usb/dwc/regs.h | 1326 ++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 1326 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/dwc/regs.h
diff --git a/drivers/usb/dwc/regs.h b/drivers/usb/dwc/regs.h
new file mode 100644
index 0000000..c03252c
--- /dev/null
+++ b/drivers/usb/dwc/regs.h
@@ -0,0 +1,1326 @@
+/*
+ * DesignWare HS OTG controller driver
+ * Copyright (C) 2006 Synopsys, Inc.
+ * Portions Copyright (C) 2010 Applied Micro Circuits Corporation.
+ *
+ * This program is free software: you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License version 2 for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see http://www.gnu.org/licenses
+ * or write to the Free Software Foundation, Inc., 51 Franklin Street,
+ * Suite 500, Boston, MA 02110-1335 USA.
+ *
+ * Based on Synopsys driver version 2.60a
+ * Modified by Mark Miesfeld <mmiesfeld@xxxxxxx>
+ *
+ * Revamped register difinitions by Tirumala R Marri(tmarri@xxxxxxx)
+ * Updated by Rupjyoti Sarmah <rsarmah@xxxxxxx>
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL SYNOPSYS, INC. BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __DWC_OTG_REGS_H__
+#define __DWC_OTG_REGS_H__
+
+#include <linux/types.h>
+/*Bit fields in the Device EP Transfer Size Register is 11 bits */
+#undef DWC_LIMITED_XFER_SIZE
+/*
+ * This file contains the Macro defintions for accessing the DWC_otg core
+ * registers.
+ *
+ * The application interfaces with the HS OTG core by reading from and
+ * writing to the Control and Status Register (CSR) space through the
+ * AHB Slave interface. These registers are 32 bits wide, and the
+ * addresses are 32-bit-block aligned.
+ * CSRs are classified as follows:
+ * - Core Global Registers
+ * - Device Mode Registers
+ * - Device Global Registers
+ * - Device Endpoint Specific Registers
+ * - Host Mode Registers
+ * - Host Global Registers
+ * - Host Port CSRs
+ * - Host Channel Specific Registers
+ *
+ * Only the Core Global registers can be accessed in both Device and
+ * Host modes. When the HS OTG core is operating in one mode, either
+ * Device or Host, the application must not access registers from the
+ * other mode. When the core switches from one mode to another, the
+ * registers in the new mode of operation must be reprogrammed as they
+ * would be after a power-on reset.
+ */
+
+/*
+ * DWC_otg Core registers. The core_global_regs structure defines the
+ * size and relative field offsets for the Core Global registers.
+ */
+#define DWC_GOTGCTL 0x000
+#define DWC_GOTGINT 0x004
+#define DWC_GAHBCFG 0x008
+#define DWC_GUSBCFG 0x00C
+#define DWC_GRSTCTL 0x010
+#define DWC_GINTSTS 0x014
+#define DWC_GINTMSK 0x018
+#define DWC_GRXSTSR 0x01C
+#define DWC_GRXSTSP 0x020
+#define DWC_GRXFSIZ 0x024
+#define DWC_GNPTXFSIZ 0x028
+#define DWC_GNPTXSTS 0x02C
+#define DWC_GI2CCTL 0x030
+#define DWC_VDCTL 0x034
+#define DWC_GGPIO 0x038
+#define DWC_GUID 0x03C
+#define DWC_GSNPSID 0x040
+#define DWC_GHWCFG1 0x044
+#define DWC_GHWCFG2 0x048
+#define DWC_GHWCFG3 0x04c
+#define DWC_GHWCFG4 0x050
+#define DWC_HPTXFSIZ 0x100
+#define DWC_DPTX_FSIZ_DIPTXF(x) (0x104 + x * 4) /* 15 <= x > 1 */
+
+#define DWC_GLBINTRMASK 0x0001
+#define DWC_DMAENABLE 0x0020
+#define DWC_NPTXEMPTYLVL_EMPTY 0x0080
+#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000
+#define DWC_PTXEMPTYLVL_EMPTY 0x0100
+#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000
+
+#define DWC_SLAVE_ONLY_ARCH 0
+#define DWC_EXT_DMA_ARCH 1
+#define DWC_INT_DMA_ARCH 2
+
+#define DWC_MODE_HNP_SRP_CAPABLE 0
+#define DWC_MODE_SRP_ONLY_CAPABLE 1
+#define DWC_MODE_NO_HNP_SRP_CAPABLE 2
+#define DWC_MODE_SRP_CAPABLE_DEVICE 3
+#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4
+#define DWC_MODE_SRP_CAPABLE_HOST 5
+#define DWC_MODE_NO_SRP_CAPABLE_HOST 6
+
+/*
+ * These Macros represents the bit fields of the Core OTG Controland Status
+ * Register (GOTGCTL). Set the bits using the bit fields then write the u32
+ * value to the register.
+ */
+#define DWC_GCTL_BSESSION_VALID BIT(19)
+#define DWC_GCTL_CSESSION_VALID BIT(18)
+#define DWC_GCTL_DEBOUNCE BIT(17)
+#define DWC_GCTL_CONN_ID_STATUS BIT(16)
+#define DWC_GCTL_DEV_HNP_ENA BIT(11)
+#define DWC_GCTL_HOST_HNP_ENA BIT(10)
+#define DWC_GCTL_HNP_REQ BIT(9)
+#define DWC_GCTL_HOST_NEG_SUCCES BIT(8)
+#define DWC_GCTL_SES_REQ BIT(1)
+#define DWC_GCTL_SES_REQ_SUCCESS BIT(0)
+
+#define DWC_GCTL_BSESSION_VALID_RD(reg) (((reg) & (0x001 << 19)) >> 19)
+#define DWC_GCTL_CSESSION_VALID_RD(reg) (((reg) & (0x001 << 18)) >> 18)
+#define DWC_GCTL_DEBOUNCE_RD(reg) (((reg) & (0x001 << 17)) >> 17)
+#define DWC_GCTL_CONN_ID_STATUS_RD(reg) (((reg) & (0x001 << 16)) >> 16)
+#define DWC_GCTL_DEV_HNP_ENA_RD(reg) (((reg) & (0x001 << 11)) >> 11)
+#define DWC_GCTL_HOST_HNP_ENA_RD(reg) (((reg) & (0x001 << 10)) >> 10)
+#define DWC_GCTL_HNP_REQ_RD(reg) (((reg) & (0x001 << 9)) >> 9)
+#define DWC_GCTL_HOST_NEG_SUCCES_RD(reg) (((reg) & (0x001 << 8)) >> 8)
+#define DWC_GCTL_SES_REQ_RD(reg) (((reg) & (0x001 << 1)) >> 1)
+#define DWC_GCTL_SES_REQ_SUCCESS_RD(reg) (((reg) & (0x001 << 0)) >> 0)
+
+#define DWC_GCTL_BSESSION_VALID_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 19))) | ((x) << 19))
+#define DWC_GCTL_CSESSION_VALID_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 18))) | ((x) << 18))
+#define DWC_GCTL_DEBOUNCE_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 17))) | ((x) << 17))
+#define DWC_GCTL_CONN_ID_STATUS_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 16))) | ((x) << 16))
+#define DWC_GCTL_DEV_HNP_ENA_RW (reg, x) \
+ (((reg) & (~((u32)0x01 << 11))) | ((x) << 11))
+#define DWC_GCTL_HOST_HNP_ENA_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 10))) | ((x) << 10))
+#define DWC_GCTL_HNP_REQ_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 9))) | ((x) << 9))
+#define DWC_GCTL_HOST_NEG_SUCCES_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 8))) | ((x) << 8))
+#define DWC_GCTL_SES_REQ_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 1))) | ((x) << 1))
+#define DWC_GCTL_SES_REQ_SUCCESS_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 0))) | ((x) << 0))
+/*
+ * These Macros represents the bit fields of the Core OTG Interrupt Register
+ * (GOTGINT). Set/clear the bits using the bit fields then write the u32
+ * value to the register.
+ */
+#define DWC_GINT_DEBDONE BIT(19)
+#define DWC_GINT_DEVTOUT BIT(18)
+#define DWC_GINT_HST_NEGDET BIT(17)
+#define DWC_GINT_HST_NEGSUC BIT(9)
+#define DWC_GINT_SES_REQSUC BIT(8)
+#define DWC_GINT_SES_ENDDET BIT(2)
+
+/*
+ * These Macros represents the bit fields of the Core AHB Configuration Register
+ * (GAHBCFG). Set/clear the bits using the bit fields then write the u32 value
+ * to the register.
+ */
+#define DWC_AHBCFG_FIFO_EMPTY BIT(8)
+#define DWC_AHBCFG_NPFIFO_EMPTY BIT(7)
+#define DWC_AHBCFG_DMA_ENA BIT(5)
+#define DWC_AHBCFG_BURST_LEN(x) BIT(1)
+#define DWC_AHBCFG_GLBL_INT_MASK BIT(0)
+
+#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1
+#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0
+#define DWC_GAHBCFG_DMAENABLE 1
+#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0
+#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1
+#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3
+#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5
+#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7
+
+/*
+
+ * (GUSBCFG). Set the bits using the bit fields then write the u32 value to the
+ * register.
+ */
+#define DWC_USBCFG_CORR_PKT BIT(31)
+#define DWC_USBCFG_FRC_DEV_MODE BIT(30)
+#define DWC_USBCFG_FRC_HST_MODE BIT(29)
+#define DWC_USBCFG_TERM_SEL_DL_PULSE BIT(22)
+#define DWC_USBCFG_ULPI_INTVBUS_INDICATOR BIT(21)
+#define DWC_USBCFG_ULPI_EXT_VBUS_DRV BIT(20)
+#define DWC_USBCFG_ULPI_CLK_SUS_M BIT(19)
+#define DWC_USBCFG_ULPI_AUTO_RES BIT(18)
+#define DWC_USBCFG_ULPI_FSLS BIT(17)
+#define DWC_USBCFG_OTGUTMIFSSEL BIT(16)
+#define DWC_USBCFG_PHYLPWRCLKSEL BIT(15)
+#define DWC_USBCFG_NPTXFRWNDEN BIT(14)
+#define DWC_USBCFG_TRN_TIME(x) (x << 10)
+#define DWC_USBCFG_HNP_CAP BIT(9)
+#define DWC_USBCFG_SRP_CAP BIT(8)
+#define DWC_USBCFG_DDRSEL BIT(7)
+#define DWC_USBCFG_USB_2_11 BIT(6)
+#define DWC_USBCFG_FSINTF BIT(5)
+#define DWC_USBCFG_ULPI_UTMI_SEL BIT(4)
+#define DWC_USBCFG_PHYIF BIT(3)
+#define DWC_USBCFG_TOUT_CAL(x) (x << 0)
+
+/*
+ * These Macros represents the bit fields of the Core Reset Register (GRSTCTL).
+ * Set/clear the bits using the bit fields then write the u32 value to the
+ * register.
+ */
+#define DWC_RSTCTL_AHB_IDLE BIT(31)
+#define DWC_RSTCTL_DMA_REQ BIT(30)
+#define DWC_RSTCTL_TX_FIFO_NUM(reg, x) \
+ (((reg) & (~((u32)0x1f << 6))) | ((x) << 6))
+#define DWC_RSTCTL_TX_FIFO_FLUSH BIT(5)
+#define DWC_RSTCTL_RX_FIFO_FLUSH BIT(4)
+#define DWC_RSTCTL_TKN_QUE_FLUSH BIT(3)
+#define DWC_RSTCTL_HSTFRM_CNTR_RST BIT(2)
+#define DWC_RSTCTL_HCLK_SFT_RST BIT(1)
+#define DWC_RSTCTL_SFT_RST BIT(1)
+#define DWC_GRSTCTL_TXFNUM_ALL 0x10
+
+/*
+ * These Macros represents the bit fields of the Core Interrupt Mask Register
+ * (GINTMSK). Set/clear the bits using the bit fields then write the u32 value
+ * to the register.
+ */
+#define DWC_INTMSK_WKP BIT(31)
+#define DWC_INTMSK_NEW_SES_DET BIT(30)
+#define DWC_INTMSK_SES_DISCON_DET BIT(29)
+#define DWC_INTMSK_CON_ID_STS_CHG BIT(28)
+#define DWC_INTMSK_P_TXFIFO_EMPTY BIT(26)
+#define DWC_INTMSK_HST_CHAN BIT(25)
+#define DWC_INTMSK_HST_PORT BIT(24)
+#define DWC_INTMSK_DATA_FETCH_SUS BIT(23)
+#define DWC_INTMSK_INCMP_PTX BIT(22)
+#define DWC_INTMSK_INCMP_OUT_PTX BIT(21)
+#define DWC_INTMSK_INCMP_IN_ATX BIT(20)
+#define DWC_INTMSK_OUT_ENDP BIT(19)
+#define DWC_INTMSK_IN_ENDP BIT(18)
+#define DWC_INTMSK_ENDP_MIS_MTCH BIT(17)
+#define DWC_INTMSK_END_OF_PFRM BIT(15)
+#define DWC_INTMSK_ISYNC_OUTPKT_DRP BIT(14)
+#define DWC_INTMSK_ENUM_DONE BIT(13)
+#define DWC_INTMSK_USB_RST BIT(12)
+#define DWC_INTMSK_USB_SUSP BIT(11)
+#define DWC_INTMSK_EARLY_SUSP BIT(10)
+#define DWC_INTMSK_I2C_INTR BIT(9)
+#define DWC_INTMSK_GLBL_OUT_NAK BIT(7)
+#define DWC_INTMSK_GLBL_IN_NAK BIT(6)
+#define DWC_INTMSK_NP_TXFIFO_EMPT BIT(5)
+#define DWC_INTMSK_RXFIFO_NOT_EMPT BIT(4)
+#define DWC_INTMSK_STRT_OF_FRM BIT(3)
+#define DWC_INTMSK_OTG BIT(2)
+#define DWC_INTMSK_MODE_MISMTC BIT(1)
+/*
+ * These Macros represents the bit fields of the Core Interrupt Register
+ * (GINTSTS). Set/clear the bits using the bit fields then write the u32 value
+ * to the register.
+ */
+#define DWC_INTSTS_WKP BIT(31)
+#define DWC_INTSTS_NEW_SES_DET BIT(30)
+#define DWC_INTSTS_SES_DISCON_DET BIT(29)
+#define DWC_INTSTS_CON_ID_STS_CHG BIT(28)
+#define DWC_INTSTS_P_TXFIFO_EMPTY BIT(26)
+#define DWC_INTSTS_HST_CHAN BIT(25)
+#define DWC_INTSTS_HST_PORT BIT(24)
+#define DWC_INTSTS_DATA_FETCH_SUS BIT(23)
+#define DWC_INTSTS_INCMP_PTX BIT(22)
+#define DWC_INTSTS_INCMP_OUT_PTX BIT(21)
+#define DWC_INTSTS_INCMP_IN_ATX BIT(20)
+#define DWC_INTSTS_OUT_ENDP BIT(19)
+#define DWC_INTSTS_IN_ENDP BIT(18)
+#define DWC_INTSTS_ENDP_MIS_MTCH BIT(17)
+#define DWC_INTSTS_END_OF_PFRM BIT(15)
+#define DWC_INTSTS_ISYNC_OUTPKT_DRP BIT(14)
+#define DWC_INTSTS_ENUM_DONE BIT(13)
+#define DWC_INTSTS_USB_RST BIT(12)
+#define DWC_INTSTS_USB_SUSP BIT(11)
+#define DWC_INTSTS_EARLY_SUSP BIT(10)
+#define DWC_INTSTS_I2C_INTR BIT(9)
+#define DWC_INTSTS_GLBL_OUT_NAK BIT(7)
+#define DWC_INTSTS_GLBL_IN_NAK BIT(6)
+#define DWC_INTSTS_NP_TXFIFO_EMPT BIT(5)
+#define DWC_INTSTS_RXFIFO_NOT_EMPT BIT(4)
+#define DWC_INTSTS_STRT_OF_FRM BIT(3)
+#define DWC_INTSTS_OTG BIT(2)
+#define DWC_INTSTS_MODE_MISMTC BIT(1)
+#define DWC_INTSTS_CURR_MODE BIT(0)
+#define DWC_SOF_INTR_MASK 0x0008
+#define DWC_HOST_MODE 1
+
+/*
+ * These Macros represents the bit fields in the Device Receive Status Read and
+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the u32
+ * element then read out the bits using the bit elements.
+ */
+#define DWC_DM_RXSTS_PKT_STS (0x01f << 17)
+#define DWC_DM_RXSTS_PKT_DPID (0x003 << 15)
+#define DWC_DM_RXSTS_BYTE_CNT (0x7ff << 4)
+#define DWC_DM_RXSTS_CHAN_NUM (0x00f << 0)
+
+#define DWC_DM_RXSTS_PKT_STS_RD(reg) (((reg) & (0x00f << 17)) >> 17)
+#define DWC_DM_RXSTS_PKT_DPID_RD(reg) (((reg) & (0x003 << 15)) >> 15)
+#define DWC_DM_RXSTS_BYTE_CNT_RD(reg) (((reg) & (0x7ff << 04)) >> 04)
+#define DWC_DM_RXSTS_CHAN_NUM_RD(reg) ((reg) & 0x00f)
+
+#define DWC_STS_DATA_UPDT 0x2 /* OUT Data Packet */
+#define DWC_STS_XFER_COMP 0x3 /* OUT Data Transfer Complete */
+#define DWC_DSTS_GOUT_NAK 0x1 /* Global OUT NAK */
+#define DWC_DSTS_SETUP_COMP 0x4 /* Setup Phase Complete */
+#define DWC_DSTS_SETUP_UPDT 0x6 /* SETUP Packet */
+
+/*
+ * These Macros represents the bit fields in the Host Receive Status Read and
+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the u32
+ * element then read out the bits using the bit elements.
+ */
+#define DWC_HM_RXSTS_FRM_NUM (0x00f << 21)
+#define DWC_HM_RXSTS_PKT_STS (0x01f << 17)
+#define DWC_HM_RXSTS_PKT_DPID (0x003 << 15)
+#define DWC_HM_RXSTS_BYTE_CNT (0x7ff << 4)
+#define DWC_HM_RXSTS_CHAN_NUM (0x00f << 0)
+
+#define DWC_HM_RXSTS_PKT_STS_RD(reg) (((reg) & (0x00f << 17)) >> 17)
+#define DWC_HM_RXSTS_PKT_DPID_RD(reg) (((reg) & (0x003 << 15)) >> 15)
+#define DWC_HM_RXSTS_BYTE_CNT_RD(reg) (((reg) & (0x7ff << 04)) >> 04)
+#define DWC_HM_RXSTS_CHAN_NUM_RD(reg) ((reg) & 0x00f)
+
+#define DWC_GRXSTS_PKTSTS_IN 0x2
+#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3
+#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
+#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7
+
+/*
+ * These Macros represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
+ * GNPTXFSIZ, DPTXFSIZn). Read the register into the u32 element then
+ * read out the bits using the bit elements.
+ */
+#define DWC_TX_FIFO_DEPTH_RD(reg) (((reg) & ((u32)0xffff << 16)) >> 16)
+#define DWC_TX_FIFO_DEPTH_WR(reg, x) \
+ (((reg) & (~((u32)0xffff << 16))) | ((x) << 16))
+#define DWC_TX_FIFO_START_ADDR_RD(reg) ((reg) & 0xffff)
+#define DWC_TX_FIFO_START_ADDR_WR(reg, x) \
+ (((reg) & (~((u32)0xffff))) | (x))
+
+/*
+ * These Macros represents the bit fields in the Non-Periodic Tx FIFO/Queue
+ * Status Register (GNPTXSTS). Read the register into the u32 element then read
+ * out the bits using the bit elements.
+ */
+#define DWC_GNPTXSTS_NPTXQTOP_CHNEP_RD(x) (((x) & (0x3f << 26)) >> 26)
+#define DWC_GNPTXSTS_NPTXQTOP_TKN_RD(x) (((x) & (0x03 << 24)) >> 24)
+#define DWC_GNPTXSTS_NPTXQSPCAVAIL_RD(x) (((x) & (0xff << 16)) >> 16)
+#define DWC_GNPTXSTS_NPTXFSPCAVAIL_RD(x) (0xffff & (x))
+
+/*
+ * These Macros represents the bit fields in the Transmit FIFO Status Register
+ * (DTXFSTS). Read the register into the u32 element then read out the bits
+ * using the bit elements.
+ */
+#define DWC_DTXFSTS_TXFSSPC_AVAI_RD(x) ((x) & 0xffff)
+
+/*
+ * These Macros represents the bit fields in the I2C Control Register (I2CCTL).
+ * Read the register into the u32 element then read out the bits using the bit
+ * elements.
+ */
+#define DWC_I2CCTL_BSYDNE BIT(31)
+#define DWC_I2CCTL_RW BIT(30)
+#define DWC_I2CCTL_I2CDEVADDR(x) ((x) << 27)
+#define DWC_I2CCTL_I2CSUSCTL BIT(25)
+#define DWC_I2CCTL_ACK BIT(24)
+#define DWC_I2CCTL_I2CEN BIT(23)
+#define DWC_I2CCTL_ADDR BIT(22)
+#define DWC_I2CCTL_REGADDR(x) ((x) << 14)
+#define DWC_I2CCTL_RWDATA(x) ((x) << 6)
+
+/*
+ * These Macros represents the bit fields in the User HW Config1 Register. Read
+ * the register into the u32 element then read out the bits using the bit
+ * elements.
+ */
+#define DWC_HWCFG1_EPDIR15(x) ((x) << 30)
+#define DWC_HWCFG1_EPDIR14(x) ((x) << 28)
+#define DWC_HWCFG1_EPDIR13(x) ((x) << 26)
+#define DWC_HWCFG1_EPDIR12(x) ((x) << 24)
+#define DWC_HWCFG1_EPDIR11(x) ((x) << 22)
+#define DWC_HWCFG1_EPDIR10(x) ((x) << 20)
+#define DWC_HWCFG1_EPDIR9(x) ((x) << 18)
+#define DWC_HWCFG1_EPDIR8(x) ((x) << 16)
+#define DWC_HWCFG1_EPDIR7(x) ((x) << 14)
+#define DWC_HWCFG1_EPDIR6(x) ((x) << 13)
+#define DWC_HWCFG1_EPDIR5(x) ((x) << 10)
+#define DWC_HWCFG1_EPDIR4(x) ((x) << 08)
+#define DWC_HWCFG1_EPDIR3(x) ((x) << 06)
+#define DWC_HWCFG1_EPDIR2(x) ((x) << 04)
+#define DWC_HWCFG1_EPDIR1(x) ((x) << 02)
+#define DWC_HWCFG1_EPDIR0(x) ((x) << 00)
+
+/*
+ * These Macros represents the bit fields in the User HW Config2 Register. Read
+ * the register into the u32 element then read out the bits using the bit
+ * elements.
+ */
+#define DWC_HWCFG2_DEV_TKN_Q_DEPTH_RD(x) (((x) & (0x1F << 26)) >> 26)
+#define DWC_HWCFG2_HOST_PERIO_Q_DEPTH_RD(x) (((x) & (0x3 << 24)) >> 24)
+#define DWC_HWCFG2_NP_TX_Q_DEPTH_RD(x) (((x) & (0x3 << 22)) >> 22)
+#define DWC_HWCFG2_RX_STS_Q_DEPTH_RD(x) (((x) & (0x3 << 20)) >> 20)
+#define DWC_HWCFG2_DYN_FIFO_RD(x) (((x) & (0x1 << 19)) >> 19)
+#define DWC_HWCFG2_PERIO_EP_SUPP_RD(x) (((x) & (0x1 << 18)) >> 18)
+#define DWC_HWCFG2_NO_HST_CHAN_RD(x) (((x) & (0xf << 14)) >> 14)
+#define DWC_HWCFG2_NO_DEV_EP_RD(x) (((x) & (0xf << 10)) >> 10)
+#define DWC_HWCFG2_FS_PHY_TYPE_RD(x) (((x) & (0x3 << 8)) >> 8)
+#define DWC_HWCFG2_HS_PHY_TYPE_RD(x) (((x) & (0x3 << 06)) >> 06)
+#define DWC_HWCFG2_P_2_P_RD(x) (((x) & (0x1 << 05)) >> 05)
+#define DWC_HWCFG2_ARCH_RD(x) (((x) & (0x3 << 03)) >> 03)
+#define DWC_HWCFG2_OP_MODE_RD(x) ((x) & 0x7)
+
+#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
+#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
+#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
+#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
+#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
+
+/*
+ * These Macros represents the bit fields in the User HW Config3 Register. ead
+ * the register into the u32 element then read out the bits using the bit
+ * elements.
+ */
+#define DWC_HWCFG3_DFIFO_DEPTH_RD(x) (((x) & (0xffff << 16)) >> 16)
+#define DWC_HWCFG3_AHB_PHY_CLK_SYNC_RD(x) (((x) & (0x1 << 12)) >> 12)
+#define DWC_HWCFG3_SYNC_RST_TYPE_RD(x) (((x) & (0x1 << 11)) >> 11)
+#define DWC_HWCFG3_OPT_FEATURES_RD(x) (((x) & (0x1 << 10)) >> 10)
+#define DWC_HWCFG3_VEND_CTRL_IF_RD(x) (((x) & (0x1 << 9)) >> 9)
+#define DWC_HWCFG3_I2C_RD(x) (((x) & (0x1 << 8)) >> 8)
+#define DWC_HWCFG3_OTG_FUNC_RD(x) (((x) & (0x1 << 07)) >> 07)
+#define DWC_HWCFG3_PKTSIZE_CTR_WIDTH_RD(x) (((x) & (0x7 << 04)) >> 04)
+#define DWC_HWCFG3_XFERSIZE_CTR_WIDTH_RD(x) ((x) & 0xf)
+
+/*
+ * These Macros represents the bit fields in the User HW Config4 Register. Read
+ * the register into the u32 element then read out the bits using the bit
+ * elements.
+ */
+#define DWC_HWCFG4_NUM_IN_EPS_RD(x) (((x) & (0xF << 26)) >> 26)
+#define DWC_HWCFG4_DED_FIFO_ENA_RD(x) (((x) & (0x1 << 25)) >> 25)
+#define DWC_HWCFG4_SES_END_FILT_EN_RD(x) (((x) & (0x1 << 24)) >> 24)
+#define DWC_HWCFG4_BVALID_FILT_EN_RD(x) (((x) & (0x1 << 23)) >> 23)
+#define DWC_HWCFG4_AVALID_FILT_EN_RD(x) (((x) & (0x1 << 22)) >> 22)
+#define DWC_HWCFG4_VBUS_VALID_FILT_EN_RD(x) (((x) & (0x1 << 21)) >> 21)
+#define DWC_HWCFG4_IDDIG_FILT_EN_RD(x) (((x) & (0x1 << 20)) >> 20)
+#define DWC_HWCFG4_NUM_DEV_MODE_CTRL_EP_RD(x) (((x) & (0xF << 16)) >> 16)
+#define DWC_HWCFG4_UTMI_PHY_DATA_WIDTH_RD(x) (((x) & (0x3 << 14)) >> 14)
+#define DWC_HWCFG4_MIN_AHB_FREQ_RD(x) (((x) & (0x1 << 05)) >> 05)
+#define DWC_HWCFG4_POWER_OPT_RD(x) (((x) & (0x1 << 04)) >> 04)
+#define DWC_HWCFG4_NUM_DEV_PERIO_IN_EP_RD(x) ((x) & 0xf)
+
+/*
+ * Device Global Registers. Offsets 800h-BFFh
+ *
+ * The following structures define the size and relative field offsets for the
+ * Device Mode Registers.
+ *
+ * These registers are visible only in Device mode and must not be accessed in
+ * Host mode, as the results are unknown.
+ */
+#define DWC_DCFG 0x000
+#define DWC_DCTL 0x004
+#define DWC_DSTS 0x008
+#define DWC_DIEPMSK 0x010
+#define DWC_DOEPMSK 0x014
+#define DWC_DAINT 0x018
+#define DWC_DAINTMSK 0x01C
+#define DWC_DTKNQR1 0x020
+#define DWC_DTKNQR2 0x024
+#define DWC_DVBUSDIS 0x028
+#define DWC_DVBUSPULSE 0x02C
+#define DWC_DTKNQR3_DTHRCTL 0x030
+#define DWC_DTKNQR4FIFOEMPTYMSK 0x034
+
+/*
+ * These Macros represents the bit fields in the Device Configuration
+ * Register. Read the register into the u32 member then
+ * set/clear the bits using the bit elements. Write the
+ * u32 member to the dcfg register.
+*/
+#define DWC_DCFG_IN_EP_MISMATCH_CNT_RD(x) (((x) & (0x1f << 18)) >> 18)
+#define DWC_DCFG_P_FRM_INTRVL_RD(x) (((x) & (0x03 << 11)) >> 11)
+#define DWC_DCFG_DEV_ADDR_RD(x) (((x) & (0x3f << 04)) >> 04)
+#define DWC_DCFG_NGL_STS_OUT_RD(x) (((x) & (0x1 << 2)) >> 2)
+#define DWC_DCFG_DEV_SPEED_RD(x) ((x) & 0x3)
+
+#define DWC_DCFG_IN_EP_MISMATCH_CNT_WR(reg, x) \
+ (((reg) & (~((u32)0x1f << 18))) | ((x) << 18))
+#define DWC_DCFG_P_FRM_INTRVL_WR(reg, x) \
+ (((reg) & (~((u32)0x03 << 11))) | ((x) << 11))
+#define DWC_DCFG_DEV_ADDR_WR(reg, x) \
+ (((reg) & (~((u32)0x3f << 04))) | ((x) << 04))
+#define DWC_DCFG_NGL_STS_OUT_WR(reg, x) \
+ (((reg) & (~((u32)0x1 << 2))) | ((x) << 2))
+#define DWC_DCFG_DEV_SPEED_WR(reg, x) \
+ (((reg) & (~(u32)0x3)) | (x))
+
+#define DWC_DCFG_FRAME_INTERVAL_80 0
+#define DWC_DCFG_FRAME_INTERVAL_85 1
+#define DWC_DCFG_FRAME_INTERVAL_90 2
+#define DWC_DCFG_FRAME_INTERVAL_95 3
+
+/*
+ * These Macros represents the bit fields in the Device Control Register. Read
+ * the register into the u32 member then set/clear the bits using the bit
+ * elements.
+ */
+#define DWC_DCTL_PWR_ON_PROG_DONE_RD(x) (((x) & (1 << 11)) >> 11)
+
+#define DWC_DCTL_PWR_ON_PROG_DONE_WR(reg, x) \
+ (((reg) & (~((u32)0x01 << 11))) | ((x) << 11))
+#define DWC_DCTL_CLR_GLBL_OUT_NAK_WR(reg, x) \
+ (((reg) & (~((u32)0x01 << 10))) | ((x) << 10))
+#define DWC_DCTL_SET_GLBL_OUT_NAL(reg, x) \
+ (((reg) & (~((u32)0x01 << 9))) | ((x) << 9))
+#define DWC_DCTL_CLR_CLBL_NP_IN_NAK(reg, x) \
+ (((reg) & (~((u32)0x01 << 8))) | ((x) << 8))
+#define DWC_DCTL_SET_GLBL_NP_IN_NAK(reg, x) \
+ (((reg) & (~((u32)0x01 << 07))) | ((x) << 07))
+#define DWC_DCTL_TST_CTL(reg, x) \
+ (((reg) & (~((u32)0x07 << 04))) | ((x) << 04))
+#define DWC_DCTL_GLBL_OUT_NAK_STS(reg, x) \
+ (((reg) & (~((u32)0x01 << 03))) | ((x) << 03))
+#define DWC_DCTL_GLBL_NP_IN_NAK(reg, x) \
+ (((reg) & (~((u32)0x01 << 02))) | ((x) << 02))
+#define DWC_DCTL_SFT_DISCONNECT(reg, x) \
+ (((reg) & (~((u32)0x01 << 01))) | ((x) << 01))
+#define DEC_DCTL_REMOTE_WAKEUP_SIG(reg, x) \
+ (((reg) & (~((u32)0x01 << 00))) | ((x) << 00))
+
+/*
+ * These Macros represents the bit fields in the Dev Status Register. Read the
+ * register into the u32 member then set/clear the bits using the bit elements.
+ */
+#define DWC_DSTS_SOFFN_RD(x) (((x) & (0x3fff << 8)) >> 8)
+#define DWC_DSTS_ERRTICERR_RD(x) (((x) & (0x0001 << 3)) >> 3)
+#define DWC_DSTS_ENUM_SPEED_RD(x) (((x) & (0x0003 << 1)) >> 1)
+#define DWC_DSTS_SUSP_STS_RD(x) ((x) & 1)
+
+#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
+#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
+#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2
+#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3
+
+/*
+ * These Macros represents the bit fields in the Device IN EP Interrupt Register
+ * and the Device IN EP Common Mask Register.
+ *
+ * Read the register into the u32 member then set/clear the bits using the bit
+ * elements.
+ */
+#define DWC_DIEPINT_TXFIFO_UNDERN_RD(x) (((x) & (0x1 << 8)) >> 8)
+#define DWC_DIEPINT_TXFIFO_EMPTY_RD(x) (((x) & (0x1 << 7)) >> 7)
+#define DWC_DIEPINT_IN_EP_NAK_RD(x) (((x) & (0x1 << 6)) >> 6)
+#define DWC_DIEPINT_IN_TKN_EP_MISS_RD(x) (((x) & (0x1 << 5)) >> 5)
+#define DWC_DIEPINT_IN_TKN_TX_EMPTY_RD(x) (((x) & (0x1 << 4)) >> 4)
+#define DWC_DIEPINT_TOUT_COND_RD(x) (((x) & (0x1 << 3)) >> 3)
+#define DWC_DIEPINT_AHB_ERROR_RD(x) (((x) & (0x1 << 2)) >> 2)
+#define DWC_DIEPINT_EP_DISA_RD(x) (((x) & (0x1 << 1)) >> 1)
+#define DWC_DIEPINT_TX_CMPL_RD(x) ((x) & 0x1)
+
+#define DWC_DIEPINT_TXFIFO_UNDERN_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 8))) | ((x) << 8))
+#define DWC_DIEPINT_TXFIFO_EMPTY_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 7))) | ((x) << 7))
+#define DWC_DIEPINT_IN_EP_NAK_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 6))) | ((x) << 6))
+#define DWC_DIEPINT_IN_TKN_EP_MISS_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 5))) | ((x) << 5))
+#define DWC_DIEPINT_IN_TKN_TX_EMPTY_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 4))) | ((x) << 4))
+#define DWC_DIEPINT_TOUT_COND_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 3))) | ((x) << 3))
+#define DWC_DIEPINT_AHB_ERROR_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 2))) | ((x) << 2))
+#define DWC_DIEPINT_EP_DISA_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 1))) | ((x) << 1))
+#define DWC_DIEPINT_TX_CMPL_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 0))) | ((x) << 0))
+
+#define DWC_DIEPMSK_TXFIFO_UNDERN_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 8))) | ((x) << 8))
+#define DWC_DIEPMSK_TXFIFO_EMPTY_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 7))) | ((x) << 7))
+#define DWC_DIEPMSK_IN_EP_NAK_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 6))) | ((x) << 6))
+#define DWC_DIEPMSK_IN_TKN_EP_MISS_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 5))) | ((x) << 5))
+#define DWC_DIEPMSK_IN_TKN_TX_EMPTY_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 4))) | ((x) << 4))
+#define DWC_DIEPMSK_TOUT_COND_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 3))) | ((x) << 3))
+#define DWC_DIEPMSK_AHB_ERROR_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 2))) | ((x) << 2))
+#define DWC_DIEPMSK_EP_DISA_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 1))) | ((x) << 1))
+#define DWC_DIEPMSK_TX_CMPL_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 0))) | ((x) << 0))
+
+/*
+ * These Macros represents the bit fields in the Device OUT EP Itr Register
+ * and Device OUT EP Common Interrupt Mask Register.
+ *
+ * Read the register into the u32 member then set/clear the bits using the bit
+ * elements.
+ */
+#define DWC_DOEPINT_OUTPKT_ERR_RD(x) (((x) & (0x1 << 8)) >> 8)
+#define DWC_DOEPINT_B2B_PKTS_RD(x) (((x) & (0x1 << 6)) >> 6)
+#define DWC_DOEPINT_OUT_TKN_RD(x) (((x) & (0x1 << 4)) >> 4)
+#define DWC_DOEPINT_SETUP_DONE_RD(x) (((x) & (0x1 << 3)) >> 3)
+#define DWC_DOEPINT_AHB_ERROR_RD(x) (((x) & (0x1 << 2)) >> 2)
+#define DWC_DOEPINT_EP_DISA_RD(x) (((x) & (0x1 << 1)) >> 1)
+#define DWC_DOEPINT_TX_COMPL_RD(x) (((x) & (0x1 << 0)) >> 0)
+
+#define DWC_DOEPMSK_OUTPKT_ERR_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 8))) | ((x) << 8))
+#define DWC_DOEPMSK_B2B_PKTS_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 6))) | ((x) << 6))
+#define DWC_DOEPMSK_OUT_TKN_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 4))) | ((x) << 4))
+#define DWC_DOEPMSK_SETUP_DONE_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 3))) | ((x) << 3))
+#define DWC_DOEPMSK_AHB_ERROR_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 2))) | ((x) << 2))
+#define DWC_DOEPMSK_EP_DISA_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 1))) | ((x) << 1))
+#define DWC_DOEPMSK_TX_COMPL_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 0))) | ((x) << 0))
+
+/*
+ * These Macros represents the bit fields in the Device All EP Intr and Mask
+ * Registers. Read the register into the u32 member then set/clear the bits
+ * using the bit elements.
+ */
+#define DWC_DAINT_OUT_EP_RD(reg, ep) \
+ (((reg) & (1 << (ep + 16))) >> (ep + 16))
+#define DWC_DAINTMSK_OUT_EP_RW(reg, ep) \
+ (((reg) & (~(u32)(1 << (ep + 16)))) | (1 << (ep + 16)))
+#define DWC_DAINT_IN_EP_RD(reg, ep) (((reg) & (1 << ep)) >> ep)
+#define DWC_DAINTMSK_IN_EP_RW(reg, ep) \
+ (((reg) & (~(u32)(1 << ep))) | (1 << ep))
+#define DWC_DAINT_OUTEP15 BIT(31)
+#define DWC_DAINT_OUTEP14 BIT(30)
+#define DWC_DAINT_OUTEP13 BIT(29)
+#define DWC_DAINT_OUTEP12 BIT(28)
+#define DWC_DAINT_OUTEP11 BIT(27)
+#define DWC_DAINT_OUTEP10 BIT(26)
+#define DWC_DAINT_OUTEP09 BIT(25)
+#define DWC_DAINT_OUTEP08 BIT(24)
+#define DWC_DAINT_OUTEP07 BIT(23)
+#define DWC_DAINT_OUTEP06 BIT(22)
+#define DWC_DAINT_OUTEP05 BIT(21)
+#define DWC_DAINT_OUTEP04 BIT(20)
+#define DWC_DAINT_OUTEP03 BIT(19)
+#define DWC_DAINT_OUTEP02 BIT(18)
+#define DWC_DAINT_OUTEP01 BIT(17)
+#define DWC_DAINT_OUTEP00 BIT(16)
+#define DWC_DAINT_INEP15 BIT(15)
+#define DWC_DAINT_INEP14 BIT(14)
+#define DWC_DAINT_INEP13 BIT(13)
+#define DWC_DAINT_INEP12 BIT(12)
+#define DWC_DAINT_INEP11 BIT(11)
+#define DWC_DAINT_INEP10 BIT(10)
+#define DWC_DAINT_INEP09 BIT(9)
+#define DWC_DAINT_INEP08 BIT(8)
+#define DWC_DAINT_INEP07 BIT(7)
+#define DWC_DAINT_INEP06 BIT(6)
+#define DWC_DAINT_INEP05 BIT(5)
+#define DWC_DAINT_INEP04 BIT(4)
+#define DWC_DAINT_INEP03 BIT(3)
+#define DWC_DAINT_INEP02 BIT(2)
+#define DWC_DAINT_INEP01 BIT(1)
+#define DWC_DAINT_INEP00 BIT(0)
+
+/*
+ * These Macros represents the bit fields in the Device IN Token Queue Read
+ * Registers. Read the register into the u32 member. READ-ONLY Register
+ */
+#define DWC_DTKNQR1_EP_TKN_NO_RD(x) (((x) & (0xffffff << 8)) >> 8)
+#define DWC_DTKNQR1_WRAP_BIT_RD(x) (((x) & (1 << 7)) >> 7)
+#define DWC_DTKNQR1_INT_TKN_Q_WR_PTR_RD(x) ((x) & 0x1f)
+
+/*
+ * These Macros represents Threshold control Register. Read and wr the register
+ * into the u32 member. READ-WRITABLE Register
+ */
+#define DWC_DTHCTRL_RX_ARB_PARK_EN_RD(x) (((x) & (0x001 << 27)) >> 27)
+#define DWC_DTHCTRL_RX_THR_LEN_RD(x) (((x) & (0x1ff << 17)) >> 17)
+#define DWC_DTHCTRL_RX_THR_EN_RD(x) (((x) & (0x001 << 16)) >> 16)
+#define DWC_DTHCTRL_TX_THR_LEN_RD(x) (((x) & (0x1ff << 02)) >> 02)
+#define DWC_DTHCTRL_ISO_THR_EN(x) (((x) & (0x001 << 01)) >> 01)
+#define DWC_DTHCTRL_NON_ISO_THR_ENA_RD(x) (((x) & (0x001 << 00)) >> 00)
+
+#define DWC_DTHCTRL_RX_ARB_PARK_EN_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 27))) | ((x) << 27))
+#define DWC_DTHCTRL_RX_THR_LEN_RW(reg, x) \
+ (((reg) & (~((u32)0x1ff << 17))) | ((x) << 17))
+#define DWC_DTHCTRL_RX_THR_EN_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 16))) | ((x) << 16))
+#define DWC_DTHCTRL_TX_THR_LEN_RW(reg, x) \
+ (((reg) & (~((u32)0x1ff << 02))) | ((x) << 02))
+#define DWC_DTHCTRL_ISO_THR_EN_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 01))) | ((x) << 01))
+#define DWC_DTHCTRL_NON_ISO_THR_ENA_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 00))) | ((x) << 00))
+
+/*
+ * Device Logical IN Endpoint-Specific Registers. Offsets 900h-AFCh
+ *
+ * There will be one set of endpoint registers per logical endpoint implemented.
+ *
+ * These registers are visible only in Device mode and must not be accessed in
+ * Host mode, as the results are unknown.
+ */
+#define DWC_DIEPCTL 0x00
+#define DWC_DIEPINT 0x08
+#define DWC_DIEPTSIZ 0x10
+#define DWC_DIEPDMA 0x14
+#define DWC_DTXFSTS 0x18
+
+/*
+ * Device Logical OUT Endpoint-Specific Registers. Offsets: B00h-CFCh
+ *
+ * There will be one set of endpoint registers per logical endpoint implemented.
+ *
+ * These registers are visible only in Device mode and must not be accessed in
+ * Host mode, as the results are unknown.
+ */
+#define DWC_DOEPCTL 0x00
+#define DWC_DOEPFN 0x04
+#define DWC_DOEPINT 0x08
+#define DWC_DOEPTSIZ 0x10
+#define DWC_DOEPDMA 0x14
+
+/*
+ * These Macros represents the bit fields in the Device EP Ctrl Register. Read
+ * the register into the u32 member then set/clear the bits using the bit
+ * elements.
+ */
+#define DWC_DEP0CTL_MPS_64 0
+#define DWC_DEP0CTL_MPS_32 1
+#define DWC_DEP0CTL_MPS_16 2
+#define DWC_DEP0CTL_MPS_8 3
+
+#define DWC_DEPCTL_EPENA_RD(x) (((x) & (0x1 << 31)) >> 31)
+#define DWC_DEPCTL_EPDIS_RD(x) (((x) & (0x1 << 30)) >> 30)
+#define DWC_DEPCTL_SET_DATA1_PID_RD(x) (((x) & (0x1 << 29)) >> 29)
+#define DWC_DEPCTL_SET_DATA0_PID_RD(x) (((x) & (0x1 << 28)) >> 28)
+#define DWC_DEPCTL_SET_NAK_RD(x) (((x) & (0x1 << 27)) >> 27)
+#define DWC_DEPCTL_CLR_NAK_RD(x) (((x) & (0x1 << 26)) >> 26)
+#define DWC_DEPCTL_TX_FIFO_NUM_RD(x) (((x) & (0xf << 22)) >> 22)
+#define DWC_DEPCTL_STALL_HNDSHK _RD(x) (((x) & (0x1 << 21)) >> 21)
+#define DWC_DEPCTL_SNP_MODE_RD(x) (((x) & (0x1 << 20)) >> 20)
+#define DWC_DEPCTL_EP_TYPE_RD(x) (((x) & (0x3 << 18)) >> 18)
+#define DWC_DEPCTL_NKASTS_RD(x) (((x) & (0x1 << 17)) >> 17)
+#define DWC_DEPCTL_DPID _RD(x) (((x) & (0x1 << 16)) >> 16)
+#define DWC_DEPCTL_ACT_EP_RD(x) (((x) & (0x1 << 15)) >> 15)
+#define DWC_DEPCTL_NXT_EP_RD(x) (((x) & (0xf << 11)) >> 11)
+#define DWC_DEPCTL_MPS_RD(x) (((x) & (0x7ff << 00)) >> 00)
+
+#define DWC_DEPCTL_EPENA_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 31))) | ((x) << 31))
+#define DWC_DEPCTL_EPDIS_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 30))) | ((x) << 30))
+#define DWC_DEPCTL_SET_DATA1_PID_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 29))) | ((x) << 29))
+#define DWC_DEPCTL_SET_DATA0_PID_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 28))) | ((x) << 28))
+#define DWC_DEPCTL_SET_NAK_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 27))) | ((x) << 27))
+#define DWC_DEPCTL_CLR_NAK_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 26))) | ((x) << 26))
+#define DWC_DEPCTL_TX_FIFO_NUM_RW(reg, x) \
+ (((reg) & (~((u32)0x00f << 22))) | ((x) << 22))
+#define DWC_DEPCTL_STALL_HNDSHK_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 21))) | ((x) << 21))
+#define DWC_DEPCTL_SNP_MODE_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 20))) | ((x) << 20))
+#define DWC_DEPCTL_EP_TYPE_RW(reg, x) \
+ (((reg) & (~((u32)0x003 << 18))) | ((x) << 18))
+#define DWC_DEPCTL_NKASTS_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 17))) | ((x) << 17))
+#define DWC_DEPCTL_DPID_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 16))) | ((x) << 16))
+#define DWC_DEPCTL_ACT_EP_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 15))) | ((x) << 15))
+#define DWC_DEPCTL_NXT_EP_RW(reg, x) \
+ (((reg) & (~((u32)0x00f << 11))) | ((x) << 11))
+#define DWC_DEPCTL_MPS_RW(reg, x) \
+ (((reg) & (~((u32)0x7ff << 00))) | ((x) << 00))
+
+/*
+ * These Macros represents the bit fields in the Device EP Txfer Size Register.
+ * Read the register into the u32 member then set/clear the bits using the bit
+ * elements.
+ */
+#if defined(DWC_LIMITED_XFER_SIZE)
+#define DWC_DEPTSIZ_MCOUNT_RD(x) (((x) & (0x003 << 29)) >> 29)
+#define DWC_DEPTSIZ_PKT_CNT_RD(x) (((x) & (0x01f << 19)) >> 19)
+#define DWC_DEPTSIZ_XFER_SIZ_RD(x) (((x) & (0x7ff << 00)) >> 00)
+#define DWC_DEPTSIZ_MCOUNT_RW(reg, x) \
+ (((reg) & (~((u32)0x003 << 29))) | ((x) << 29))
+#define DWC_DEPTSIZ_PKT_CNT_RW(reg, x) \
+ (((reg) & (~((u32)0x01f << 19))) | ((x) << 19))
+#define DWC_DEPTSIZ_XFER_SIZ_RW(reg, x) \
+ (((reg) & (~((u32)0x7ff << 00))) | ((x) << 00))
+#else
+#define DWC_DEPTSIZ_MCOUNT_RD(x) \
+ (((x) & (0x003 << 29)) >> 29)
+#define DWC_DEPTSIZ_PKT_CNT_RD(x) \
+ (((x) & (0x3ff << 19)) >> 19)
+#define DWC_DEPTSIZ_XFER_SIZ_RD(x) \
+ (((x) & (0x7ffff << 00)) >> 00)
+#define DWC_DEPTSIZ_MCOUNT_RW(reg, x) \
+ (((reg) & (~((u32)0x003 << 29))) | ((x) << 29))
+#define DWC_DEPTSIZ_PKT_CNT_RW(reg, x) \
+ (((reg) & (~((u32)0x7ff << 19))) | ((x) << 19))
+#define DWC_DEPTSIZ_XFER_SIZ_RW(reg, x) \
+ (((reg) & (~((u32)0x7ffff << 00))) | ((x) << 00))
+#endif
+
+/*
+ * These Macros represents the bit fields in the Device EP 0 Transfer Size
+ * Register. Read the register into the u32 member then set/clear the bits
+ * using the bit elements.
+ */
+#define DWC_DEPTSIZ0_SUPCNT_RD(x) (((x) & (0x003 << 29)) >> 29)
+#define DWC_DEPTSIZ0_PKT_CNT_RD(x) (((x) & (0x001 << 19)) >> 19)
+#define DWC_DEPTSIZ0_XFER_SIZ_RD(x) (((x) & (0x07f << 00)) >> 00)
+#define DWC_DEPTSIZ0_SUPCNT_RW(reg, x) \
+ (((reg) & (~((u32)0x003 << 29))) | ((x) << 29))
+#define DWC_DEPTSIZ0_PKT_CNT_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 19))) | ((x) << 19))
+#define DWC_DEPTSIZ0_XFER_SIZ_RW(reg, x) \
+ (((reg) & (~((u32)0x07f << 00))) | ((x) << 00))
+
+#define MAX_PERIO_FIFOS 15 /* Max periodic FIFOs */
+#define MAX_TX_FIFOS 15 /* Max non-periodic FIFOs */
+
+/* Maximum number of Endpoints/HostChannels */
+#define MAX_EPS_CHANNELS 16 /* This come from device tree or defconfig */
+
+/*
+ * The device_if structure contains information needed to manage the DWC_otg
+ * controller acting in device mode. It represents the programming view of the
+ * device-specific aspects of the controller.
+ */
+struct device_if {
+ /* Device Global Registers starting at offset 800h */
+ ulong dev_global_regs;
+#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
+
+ /* Device Logical IN Endpoint-Specific Registers 900h-AFCh */
+ ulong in_ep_regs[MAX_EPS_CHANNELS];
+#define DWC_DEV_IN_EP_REG_OFFSET 0x900
+#define DWC_EP_REG_OFFSET 0x20
+
+ /* Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
+ ulong out_ep_regs[MAX_EPS_CHANNELS];
+#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
+
+ /* Device configuration information */
+ /* Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */
+ u8 speed;
+ /* Number # of Tx EP range: 0-15 exept ep0 */
+ u8 num_in_eps;
+ /* Number # of Rx EP range: 0-15 exept ep 0 */
+ u8 num_out_eps;
+
+ /* Size of periodic FIFOs (Bytes) */
+ u16 perio_tx_fifo_size[MAX_PERIO_FIFOS];
+
+ /* Size of Tx FIFOs (Bytes) */
+ u16 tx_fifo_size[MAX_TX_FIFOS];
+
+ /* Thresholding enable flags and length varaiables */
+ u16 rx_thr_en;
+ u16 iso_tx_thr_en;
+ u16 non_iso_tx_thr_en;
+ u16 rx_thr_length;
+ u16 tx_thr_length;
+};
+
+/*
+ * These Macros represents the bit fields in the Power and Clock Gating Control
+ * Register. Read the register into the u32 member then set/clear the
+ * bits using the bit elements.
+ */
+#define DWC_PCGCCTL_PHY_SUS_RD(x) (((x) & (0x001 << 4)) >> 4)
+#define DWC_PCGCCTL_RSTP_DWN_RD(x) (((x) & (0x001 << 3)) >> 3)
+#define DWC_PCGCCTL_PWR_CLAMP_RD(x) (((x) & (0x001 << 2)) >> 2)
+#define DWC_PCGCCTL_GATE_HCLK_RD(x) (((x) & (0x001 << 1)) >> 1)
+#define DWC_PCGCCTL_STOP_CLK_RD(x) (((x) & (0x001 << 0)) >> 0)
+
+#define DWC_PCGCCTL_RSTP_DWN_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 3))) | ((x) << 3))
+#define DWC_PCGCCTL_PWR_CLAMP_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 2))) | ((x) << 2))
+#define DWC_PCGCCTL_GATE_HCLK_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 1))) | ((x) << 1))
+#define DWC_PCGCCTL_STOP_CLK_SET(reg) \
+ (((reg) | 1))
+#define DWC_PCGCCTL_STOP_CLK_CLR(reg) \
+ (((reg) & (~((u32)0x001 << 0))))
+
+/*
+ * Host Mode Register Structures
+ */
+
+/*
+ * The Host Global Registers structure defines the size and relative field
+ * offsets for the Host Mode Global Registers. Host Global Registers offsets
+ * 400h-7FFh.
+*/
+#define DWC_HCFG 0x00
+#define DWC_HFIR 0x04
+#define DWC_HFNUM 0x08
+#define DWC_HPTXSTS 0x10
+#define DWC_HAINT 0x14
+#define DWC_HAINTMSK 0x18
+
+/*
+ * These Macros represents the bit fields in the Host Configuration Register.
+ * Read the register into the u32 member then set/clear the bits using the bit
+ * elements. Write the u32 member to the hcfg register.
+ */
+#define DWC_HCFG_FSLSUPP_RD(x) (((x) & (0x001 << 2)) >> 2)
+#define DWC_HCFG_FSLSP_CLK_RD(x) (((x) & (0x003 << 0)) >> 0)
+#define DWC_HCFG_FSLSUPP_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 2))) | ((x) << 2))
+#define DWC_HCFG_FSLSP_CLK_RW(reg, x) \
+ (((reg) & (~((u32)0x003 << 0))) | ((x) << 0))
+
+#define DWC_HCFG_30_60_MHZ 0
+#define DWC_HCFG_48_MHZ 1
+#define DWC_HCFG_6_MHZ 2
+
+/*
+ * These Macros represents the bit fields in the Host Frame Remaing/Number
+ * Register.
+ */
+#define DWC_HFIR_FRINT_RD(x) (((x) & (0xffff << 0)) >> 0)
+#define DWC_HFIR_FRINT_RW(reg, x) \
+ (((reg) & (~((u32)0xffff << 0))) | ((x) << 0))
+
+/*
+ * These Macros represents the bit fields in the Host Frame Remaing/Number
+ * Register.
+ */
+#define DWC_HFNUM_FRREM_RD(x) (((x) & (0xffff << 16)) >> 16)
+#define DWC_HFNUM_FRNUM_RD(x) (((x) & (0xffff << 0)) >> 0)
+#define DWC_HFNUM_FRREM_RW(reg, x) \
+ (((reg) & (~((u32)0xffff << 16))) | ((x) << 16))
+#define DWC_HFNUM_FRNUM_RW(reg, x) \
+ (((reg) & (~((u32)0xffff << 0))) | ((x) << 0))
+#define DWC_HFNUM_MAX_FRNUM 0x3FFF
+#define DWC_HFNUM_MAX_FRNUM 0x3FFF
+
+#define DWC_HPTXSTS_PTXQTOP_ODD_RD(x) (((x) & (0x01 << 31)) >> 31)
+#define DWC_HPTXSTS_PTXQTOP_CHNUM_RD(x) (((x) & (0x0f << 27)) >> 27)
+#define DWC_HPTXSTS_PTXQTOP_TKN_RD(x) (((x) & (0x03 << 25)) >> 25)
+#define DWC_HPTXSTS_PTXQTOP_TERM_RD(x) (((x) & (0x01 << 24)) >> 24)
+#define DWC_HPTXSTS_PTXSPC_AVAIL_RD(x) (((x) & (0xff << 16)) >> 16)
+#define DWC_HPTXSTS_PTXFSPC_AVAIL_RD(x) (((x) & (0xffff << 00)) >> 00)
+
+/*
+ * These Macros represents the bit fields in the Host Port Control and Status
+ * Register. Read the register into the u32 member then set/clear the bits using
+ * the bit elements. Write the u32 member to the hprt0 register.
+ */
+#define DWC_HPRT0_PRT_SPD_RD(x) (((x) & (0x3 << 17)) >> 17)
+#define DWC_HPRT0_PRT_TST_CTL_RD(x) (((x) & (0xf << 13)) >> 13)
+#define DWC_HPRT0_PRT_PWR_RD(x) (((x) & (0x1 << 12)) >> 12)
+#define DWC_HPRT0_PRT_LSTS_RD(x) (((x) & (0x3 << 10)) >> 10)
+#define DWC_HPRT0_PRT_RST_RD(x) (((x) & (0x1 << 8)) >> 8)
+#define DWC_HPRT0_PRT_SUS_RD(x) (((x) & (0x1 << 7)) >> 7)
+#define DWC_HPRT0_PRT_RES_RD(x) (((x) & (0x1 << 6)) >> 6)
+#define DWC_HPRT0_PRT_OVRCURR_CHG_RD(x) (((x) & (0x1 << 5)) >> 5)
+#define DWC_HPRT0_PRT_OVRCURR_ACT_RD(x) (((x) & (0x1 << 4)) >> 4)
+#define DWC_HPRT0_PRT_ENA_DIS_CHG_RD(x) (((x) & (0x1 << 3)) >> 3)
+#define DWC_HPRT0_PRT_ENA_RD(x) (((x) & (0x1 << 2)) >> 2)
+#define DWC_HPRT0_PRT_CONN_DET_RD(x) (((x) & (0x1 << 1)) >> 1)
+#define DWC_HPRT0_PRT_STS_RD(x) (((x) & (0x1 << 0)) >> 0)
+
+#define DWC_HPRT0_PRT_SPD_RW(reg, x) \
+ (((reg) & (~((u32)0x3 << 17))) | ((x) << 17))
+#define DWC_HPRT0_PRT_TST_CTL_RW(reg, x) \
+ (((reg) & (~((u32)0xf << 13))) | ((x) << 13))
+#define DWC_HPRT0_PRT_PWR_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 12))) | ((x) << 12))
+#define DWC_HPRT0_PRT_LSTS_RW(reg, x) \
+ (((reg) & (~((u32)0x3 << 10))) | ((x) << 10))
+#define DWC_HPRT0_PRT_RST_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 8))) | ((x) << 8))
+#define DWC_HPRT0_PRT_SUS_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 7))) | ((x) << 7))
+#define DWC_HPRT0_PRT_RES_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 6))) | ((x) << 6))
+#define DWC_HPRT0_PRT_OVRCURR_CHG_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 5))) | ((x) << 5))
+#define DWC_HPRT0_PRT_OVRCURR_ACT_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 4))) | ((x) << 4))
+#define DWC_HPRT0_PRT_ENA_DIS_CHG_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 3))) | ((x) << 3))
+#define DWC_HPRT0_PRT_ENA_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 2))) | ((x) << 2))
+#define DWC_HPRT0_PRT_CONN_DET_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 1))) | ((x) << 1))
+#define DWC_HPRT0_PRT_STS_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 0))) | ((x) << 0))
+
+#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
+#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
+#define DWC_HPRT0_PRTSPD_LOW_SPEED 2
+
+/*
+ * These Macros represents the bit fields in the Host All Interrupt Register.
+ */
+#define DWC_HAINT_CH15_RD(x) (((x) & (0x1 << 15)) >> 15)
+#define DWC_HAINT_CH14_RD(x) (((x) & (0x1 << 14)) >> 14)
+#define DWC_HAINT_CH13_RD(x) (((x) & (0x1 << 13)) >> 13)
+#define DWC_HAINT_CH12_RD(x) (((x) & (0x1 << 12)) >> 12)
+#define DWC_HAINT_CH11_RD(x) (((x) & (0x1 << 11)) >> 11)
+#define DWC_HAINT_CH10_RD(x) (((x) & (0x1 << 10)) >> 10)
+#define DWC_HAINT_CH09_RD(x) (((x) & (0x1 << 9)) >> 9)
+#define DWC_HAINT_CH08_RD(x) (((x) & (0x1 << 8)) >> 8)
+#define DWC_HAINT_CH07_RD(x) (((x) & (0x1 << 7)) >> 7)
+#define DWC_HAINT_CH06_RD(x) (((x) & (0x1 << 6)) >> 6)
+#define DWC_HAINT_CH05_RD(x) (((x) & (0x1 << 5)) >> 5)
+#define DWC_HAINT_CH04_RD(x) (((x) & (0x1 << 4)) >> 4)
+#define DWC_HAINT_CH03_RD(x) (((x) & (0x1 << 3)) >> 3)
+#define DWC_HAINT_CH02_RD(x) (((x) & (0x1 << 2)) >> 2)
+#define DWC_HAINT_CH01_RD(x) (((x) & (0x1 << 1)) >> 1)
+#define DWC_HAINT_CH00_RD(x) (((x) & (0x1 << 0)) >> 0)
+
+#define DWC_HAINT_RD(x) (((x) & (0xffff << 0)) >> 0)
+
+/*
+ * These Macros represents the bit fields in the Host All Interrupt Register.
+ */
+#define DWC_HAINTMSK_CH15_RD(x) (((x) & (0x1 << 15)) >> 15)
+#define DWC_HAINTMSK_CH14_RD(x) (((x) & (0x1 << 14)) >> 14)
+#define DWC_HAINTMSK_CH13_RD(x) (((x) & (0x1 << 13)) >> 13)
+#define DWC_HAINTMSK_CH12_RD(x) (((x) & (0x1 << 12)) >> 12)
+#define DWC_HAINTMSK_CH11_RD(x) (((x) & (0x1 << 11)) >> 11)
+#define DWC_HAINTMSK_CH10_RD(x) (((x) & (0x1 << 10)) >> 10)
+#define DWC_HAINTMSK_CH09_RD(x) (((x) & (0x1 << 9)) >> 9)
+#define DWC_HAINTMSK_CH08_RD(x) (((x) & (0x1 << 8)) >> 8)
+#define DWC_HAINTMSK_CH07_RD(x) (((x) & (0x1 << 7)) >> 7)
+#define DWC_HAINTMSK_CH06_RD(x) (((x) & (0x1 << 6)) >> 6)
+#define DWC_HAINTMSK_CH05_RD(x) (((x) & (0x1 << 5)) >> 5)
+#define DWC_HAINTMSK_CH04_RD(x) (((x) & (0x1 << 4)) >> 4)
+#define DWC_HAINTMSK_CH03_RD(x) (((x) & (0x1 << 3)) >> 3)
+#define DWC_HAINTMSK_CH02_RD(x) (((x) & (0x1 << 2)) >> 2)
+#define DWC_HAINTMSK_CH01_RD(x) (((x) & (0x1 << 1)) >> 1)
+#define DWC_HAINTMSK_CH00_RD(x) (((x) & (0x1 << 0)) >> 0)
+#define DWC_HAINTMSK_RD(x) ((x) & 0xffff)
+
+#define DWC_HAINTMSK_CH15_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 15))) | ((x) << 15))
+#define DWC_HAINTMSK_CH14_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 14))) | ((x) << 14))
+#define DWC_HAINTMSK_CH13_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 13))) | ((x) << 13))
+#define DWC_HAINTMSK_CH12_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 12))) | ((x) << 12))
+#define DWC_HAINTMSK_CH11_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 11))) | ((x) << 11))
+#define DWC_HAINTMSK_CH10_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 10))) | ((x) << 10))
+#define DWC_HAINTMSK_CH09_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 9))) | ((x) << 9))
+#define DWC_HAINTMSK_CH08_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 8))) | ((x) << 8))
+#define DWC_HAINTMSK_CH07_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 7))) | ((x) << 7))
+#define DWC_HAINTMSK_CH06_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 6))) | ((x) << 6))
+#define DWC_HAINTMSK_CH05_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 5))) | ((x) << 5))
+#define DWC_HAINTMSK_CH04_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 4))) | ((x) << 4))
+#define DWC_HAINTMSK_CH03_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 3))) | ((x) << 3))
+#define DWC_HAINTMSK_CH02_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 2))) | ((x) << 2))
+#define DWC_HAINTMSK_CH01_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 1))) | ((x) << 1))
+#define DWC_HAINTMSK_CH00_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 0))) | ((x) << 0))
+#define DWC_HAINTMSK_RW(reg, x) \
+ (((reg) & (~((u32)0xffff))) | x)
+
+/*
+ * Host Channel Specific Registers. 500h-5FCh
+ */
+#define DWC_HCCHAR 0x00
+#define DWC_HCSPLT 0x04
+#define DWC_HCINT 0x08
+#define DWC_HCINTMSK 0x0C
+#define DWC_HCTSIZ 0x10
+#define DWC_HCDMA 0x14
+
+/*
+ * These Macros represents the bit fields in the Host Channel Characteristics
+ * Register. Read the register into the u32 member then set/clear the bits using
+ * the bit elements. Write the u32 member to the hcchar register.
+ */
+#define DWC_HCCHAR_ENA_RD(x) (((x) & (0x001 << 31)) >> 31)
+#define DWC_HCCHAR_DIS_RD(x) (((x) & (0x001 << 30)) >> 30)
+#define DWC_HCCHAR_ODD_FRAME_RD(x) (((x) & (0x001 << 29)) >> 29)
+#define DWC_HCCHAR_DEV_ADDR_RD(x) (((x) & (0x07f << 22)) >> 22)
+#define DWC_HCCHAR_MULTI_CNT_RD(x) (((x) & (0x003 << 20)) >> 20)
+#define DWC_HCCHAR_EPTYPE_RD(x) (((x) & (0x003 << 18)) >> 18)
+#define DWC_HCCHAR_LSP_DEV_RD(x) (((x) & (0x001 << 17)) >> 17)
+#define DWC_HCCHAR_EPDIR_RD(x) (((x) & (0x001 << 15)) >> 15)
+#define DWC_HCCHAR_EP_NUM_RD(x) (((x) & (0x00f << 11)) >> 11)
+#define DWC_HCCHAR_MPS_RD(x) (((x) & (0x7ff << 0)) >> 0)
+
+#define DWC_HCCHAR_ENA_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 31))) | ((x) << 31))
+#define DWC_HCCHAR_DIS_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 30))) | ((x) << 30))
+#define DWC_HCCHAR_ODD_FRAME_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 29))) | ((x) << 29))
+#define DWC_HCCHAR_DEV_ADDR_RW(reg, x) \
+ (((reg) & (~((u32)0x07f << 22))) | ((x) << 22))
+#define DWC_HCCHAR_MULTI_CNT_RW(reg, x) \
+ (((reg) & (~((u32)0x003 << 20))) | ((x) << 20))
+#define DWC_HCCHAR_EPTYPE_RW(reg, x) \
+ (((reg) & (~((u32)0x003 << 18))) | ((x) << 18))
+#define DWC_HCCHAR_LSP_DEV_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 17))) | ((x) << 17))
+#define DWC_HCCHAR_EPDIR_RW(reg, x) \
+ (((reg) & (~((u32)0x001 << 15))) | ((x) << 15))
+#define DWC_HCCHAR_EP_NUM_RW(reg, x) \
+ (((reg) & (~((u32)0x00f << 11))) | ((x) << 11))
+#define DWC_HCCHAR_MPS_RW(reg, x) \
+ (((reg) & (~((u32)0x7ff << 0))) | ((x) << 0))
+
+#define DWC_HCSPLT_ENA_RD(x) (((x) & (0x01 << 31)) >> 31)
+#define DWC_HCSPLT_COMP_SPLT_RD(x) (((x) & (0x01 << 16)) >> 16)
+#define DWC_HCSPLT_TRANS_POS_RD(x) (((x) & (0x03 << 14)) >> 14)
+#define DWC_HCSPLT_HUB_ADDR_RD(x) (((x) & (0x7f << 7)) >> 7)
+#define DWC_HCSPLT_PRT_ADDR_RD(x) (((x) & (0x7f << 0)) >> 0)
+
+#define DWC_HCSPLT_ENA_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 31))) | ((x) << 31))
+#define DWC_HCSPLT_COMP_SPLT_RW(reg, x) \
+ (((reg) & (~((u32)0x01 << 16))) | ((x) << 16))
+#define DWC_HCSPLT_TRANS_POS_RW(reg, x) \
+ (((reg) & (~((u32)0x03 << 14))) | ((x) << 14))
+#define DWC_HCSPLT_HUB_ADDR_RW(reg, x) \
+ (((reg) & (~((u32)0x7f << 7))) | ((x) << 7))
+#define DWC_HCSPLT_PRT_ADDR_RW(reg, x) \
+ (((reg) & (~((u32)0x7f << 0))) | ((x) << 0))
+
+#define DWC_HCSPLIT_XACTPOS_MID 0
+#define DWC_HCSPLIT_XACTPOS_END 1
+#define DWC_HCSPLIT_XACTPOS_BEGIN 2
+#define DWC_HCSPLIT_XACTPOS_ALL 3
+
+/*
+ * These Macros represents the bit fields in the Host All Interrupt
+ * Register.
+ */
+#define DWC_HCINT_DATA_TOG_ERR_RD(x) (((x) & (0x1 << 10)) >> 10)
+#define DWC_HCINT_FRAME_OVERN_ERR_RD(x) (((x) & (0x1 << 9)) >> 9)
+#define DWC_HCINT_BBL_ERR_RD(x) (((x) & (0x1 << 8)) >> 8)
+#define DWC_HCINT_TRANS_ERR_RD(x) (((x) & (0x1 << 7)) >> 7)
+#define DWC_HCINT_NYET_RESP_REC_RD(x) (((x) & (0x1 << 6)) >> 6)
+#define DWC_HCINT_ACK_RESP_REC_RD(x) (((x) & (0x1 << 5)) >> 5)
+#define DWC_HCINT_NAK_RESP_REC_RD(x) (((x) & (0x1 << 4)) >> 4)
+#define DWC_HCINT_STALL_RESP_REC_RD(x) (((x) & (0x1 << 3)) >> 3)
+#define DWC_HCINT_AHB_ERR_RD(x) (((x) & (0x1 << 2)) >> 2)
+#define DWC_HCINT_CHAN_HALTED_RD(x) (((x) & (0x1 << 1)) >> 1)
+#define DWC_HCINT_TXFER_CMPL_RD(x) (((x) & (0x1 << 0)) >> 0)
+
+#define DWC_HCINT_DATA_TOG_ERR_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 10))) | ((x) << 10))
+#define DWC_HCINT_FRAME_OVERN_ERR_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 9))) | ((x) << 9))
+#define DWC_HCINT_BBL_ERR_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 8))) | ((x) << 8))
+#define DWC_HCINT_TRANS_ERR_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 7))) | ((x) << 7))
+#define DWC_HCINT_NYET_RESP_REC_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 6))) | ((x) << 6))
+#define DWC_HCINT_ACK_RESP_REC_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 5))) | ((x) << 5))
+#define DWC_HCINT_NAK_RESP_REC_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 4))) | ((x) << 4))
+#define DWC_HCINT_STALL_RESP_REC_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 3))) | ((x) << 3))
+#define DWC_HCINT_AHB_ERR_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 2))) | ((x) << 2))
+#define DWC_HCINT_CHAN_HALTED_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 1))) | ((x) << 1))
+#define DWC_HCINT_TXFER_CMPL_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 0))) | ((x) << 0))
+
+/*
+ * These Macros represents the bit fields in the Host Channel Transfer Size
+ * Register. Read the register into the u32 member then set/clear the bits
+ * using the bit elements. Write the u32 member to the hcchar register.
+ */
+#define DWC_HCTSIZ_DO_PING_PROTO_RD(x) (((x) & (0x00001 << 31)) >> 31)
+#define DWC_HCTSIZ_PKT_PID_RD(x) (((x) & (0x00003 << 29)) >> 29)
+#define DWC_HCTSIZ_PKT_CNT_RD(x) (((x) & (0x003ff << 19)) >> 19)
+#define DWC_HCTSIZ_XFER_SIZE_RD(x) (((x) & (0x7ffff << 00)) >> 00)
+
+#define DWC_HCTSIZ_DO_PING_PROTO_RW(reg, x) \
+ (((reg) & (~((u32)0x00001 << 31))) | ((x) << 31))
+#define DWC_HCTSIZ_PKT_PID_RW(reg, x) \
+ (((reg) & (~((u32)0x00003 << 29))) | ((x) << 29))
+#define DWC_HCTSIZ_PKT_CNT_RW(reg, x) \
+ (((reg) & (~((u32)0x003ff << 19))) | ((x) << 19))
+#define DWC_HCTSIZ_XFER_SIZE_RW(reg, x) \
+ (((reg) & (~((u32)0x7ffff << 00))) | ((x) << 00))
+
+#define DWC_HCTSIZ_DATA0 0
+#define DWC_HCTSIZ_DATA1 2
+#define DWC_HCTSIZ_DATA2 1
+#define DWC_HCTSIZ_MDATA 3
+#define DWC_HCTSIZ_SETUP 3
+
+/*
+ * These Macros represents the bit fields in the Host Channel Interrupt Mask
+ * Register. Read the register into the u32 member then set/clear the bits using
+ * the bit elements. Write the u32 member to the hcintmsk register.
+ */
+#define DWC_HCINTMSK_DATA_TOG_ERR_RD(x) (((x) & (0x1 << 10)) >> 10)
+#define DWC_HCINTMSK_FRAME_OVERN_ERR_RD(x) (((x) & (0x1 << 9)) >> 9)
+#define DWC_HCINTMSK_BBL_ERR_RD(x) (((x) & (0x1 << 8)) >> 8)
+#define DWC_HCINTMSK_TRANS_ERR_RD(x) (((x) & (0x1 << 7)) >> 7)
+#define DWC_HCINTMSK_NYET_RESP_REC_RD(x) (((x) & (0x1 << 6)) >> 6)
+#define DWC_HCINTMSK_ACK_RESP_REC_RD(x) (((x) & (0x1 << 5)) >> 5)
+#define DWC_HCINTMSK_NAK_RESP_REC_RD(x) (((x) & (0x1 << 4)) >> 4)
+#define DWC_HCINTMSK_STALL_RESP_REC_RD(x) (((x) & (0x1 << 3)) >> 3)
+#define DWC_HCINTMSK_AHB_ERR_RD(x) (((x) & (0x1 << 2)) >> 2)
+#define DWC_HCINTMSK_CHAN_HALTED_RD(x) (((x) & (0x1 << 1)) >> 1)
+#define DWC_HCINTMSK_TXFER_CMPL_RD(x) (((x) & (0x1 << 0)) >> 0)
+
+#define DWC_HCINTMSK_DATA_TOG_ERR_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 10))) | ((x) << 10))
+#define DWC_HCINTMSK_FRAME_OVERN_ERR_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 9))) | ((x) << 9))
+#define DWC_HCINTMSK_BBL_ERR_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 8))) | ((x) << 8))
+#define DWC_HCINTMSK_TRANS_ERR_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 7))) | ((x) << 7))
+#define DWC_HCINTMSK_NYET_RESP_REC_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 6))) | ((x) << 6))
+#define DWC_HCINTMSK_ACK_RESP_REC_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 5))) | ((x) << 5))
+#define DWC_HCINTMSK_NAK_RESP_REC_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 4))) | ((x) << 4))
+#define DWC_HCINTMSK_STALL_RESP_REC_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 3))) | ((x) << 3))
+#define DWC_HCINTMSK_AHB_ERR_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 2))) | ((x) << 2))
+#define DWC_HCINTMSK_CHAN_HALTED_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 1))) | ((x) << 1))
+#define DWC_HCINTMSK_TXFER_CMPL_RW(reg, x) \
+ (((reg) & (~((u32)0x1 << 0))) | ((x) << 0))
+
+/*
+ * OTG Host Interface Structure.
+ *
+ * The OTG Host Interface Structure structure contains information needed to
+ * manage the DWC_otg controller acting in host mode. It represents the
+ * programming view of the host-specific aspects of the controller.
+ */
+struct dwc_host_if { /* CONFIG_DWC_OTG_REG_LE */
+ /* Host Global Registers starting at offset 400h. */
+ ulong host_global_regs;
+#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
+
+ /* Host Port 0 Control and Status Register */
+ ulong hprt0;
+#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
+
+ /* Host Channel Specific Registers at offsets 500h-5FCh. */
+ ulong hc_regs[MAX_EPS_CHANNELS];
+#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
+#define DWC_OTG_CHAN_REGS_OFFSET 0x20
+
+ /* Host configuration information */
+ /* Number of Host Channels (range: 1-16) */
+ u8 num_host_channels;
+ /* Periodic EPs supported (0: no, 1: yes) */
+ u8 perio_eps_supported;
+ /* Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
+ u16 perio_tx_fifo_size;
+};
+#endif
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/