Re: [PATCH v2 3/4] leds: add LM3533 LED driver

[Johan Hovold]

On Thu, May 03, 2012 at 03:51:08PM +0100, Mark Brown wrote:
> On Thu, May 03, 2012 at 01:50:59PM +0200, Johan Hovold wrote:
> > On Thu, May 03, 2012 at 11:43:44AM +0100, Mark Brown wrote:
> 
> > > > +		5 - 4.194 s
> > > > +		6 - 8.389 s
> > > > +		7 - 16.78 s
> 
> > > Shouldn't these be controlled by led_blink_set() rather than a custom
> > > ABI?
> 
> > led_blink_set controls the on/off times, but the LM3533 has the two
> > additional rise and fall-time settings which determine the transition
> > time between these states.
> 
> Hrm.  In that case these rise times are very large - I'd expect them to
> cause issues with led_set_blink() users?

They are. The default settings (as fast a transition as possible) will
probably what most people use, and if they start fiddling with the
transition times they probably know what they're doing.

> Though actually I suspect the
> solution here is to pull these out into the framework later; we can
> probably simulate reasonably in software with a lot of brightness
> variable LEDs.

Ok.

> > > > +What:		/sys/class/leds/<led>/max_current
> 
> > > Shouldn't this be set by platform data, the maximum current you can push
> > > through the LEDs seems like a board dependant thing which won't change
> > > dynamically at runtime.  The brightness can already be varied.
> 
> > I fully agree and it is possible to set via the platform data for that
> > reason. The end-customer, however, insisted that even this setting be
> > available through sysfs to facilitate their integration and testing.
> 
> > I'd be willing drop this attribute if requested, as it would only be used
> > during integration and could easily be added back by the end-customer if
> > needed.
> 
> I'd strongly suggest removing this for mainline.  If it's present it
> should at least be limited to the maximum specified in platform data
> (just for safety if nothing else).

Agreed.

Thanks,
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/