Re: [PATCH v3] ACPI: D3 states cleanup
From: Lin Ming
Date: Fri May 04 2012 - 01:23:21 EST
On Mon, Apr 23, 2012 at 9:52 AM, Aaron Lu <aaron.lu@xxxxxxx> wrote:
> On Mon, Apr 23, 2012 at 09:03:49AM +0800, Lin Ming wrote:
>> There are two ACPI D3 states defined now:
>> ACPI_STATE_D3 and ACPI_STATE_D3_COLD.
>>
>> But the uses of these states are not clear/correct in some code.
>> For example, some code refer ACPI_STATE_D3 as D3hot and others refer
>> it as D3cold.
>>
>> This patch introduces ACPI_STATE_D3_HOT to refer to ACPI D3hot state.
>> D3hot is only valid if _PR3 present.
>> And changes ACPI_STATE_D3 to refer to ACPI D3cold state only.
>> Also redefines ACPI_STATE_D3_COLD the same as ACPI_STATE_D3.
>>
>
> Reviewed-by: Aaron Lu <aaron.lu@xxxxxxx>
>
> Thanks,
> Aaron
>
>> Acked-by: Rafael J. Wysocki <rjw@xxxxxxx>
Len,
Will you apply this patch?
Thanks,
Lin Ming
>> Signed-off-by: Lin Ming <ming.m.lin@xxxxxxxxx>
>> ---
>>
>> v3: D3hot is only valid if _PR3 present
>>
>> drivers/acpi/power.c | 2 +-
>> drivers/acpi/scan.c | 17 +++++++----------
>> drivers/pci/pci-acpi.c | 4 ++--
>> include/acpi/actypes.h | 7 ++++---
>> 4 files changed, 14 insertions(+), 16 deletions(-)
>>
>> diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
>> index 7049a7d..330bb4d 100644
>> --- a/drivers/acpi/power.c
>> +++ b/drivers/acpi/power.c
>> @@ -631,7 +631,7 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state)
>> * We know a device's inferred power state when all the resources
>> * required for a given D-state are 'on'.
>> */
>> - for (i = ACPI_STATE_D0; i < ACPI_STATE_D3; i++) {
>> + for (i = ACPI_STATE_D0; i < ACPI_STATE_D3_HOT; i++) {
>> list = &device->power.states[i].resources;
>> if (list->count < 1)
>> continue;
>> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
>> index 767e2dc..7417267 100644
>> --- a/drivers/acpi/scan.c
>> +++ b/drivers/acpi/scan.c
>> @@ -869,7 +869,7 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
>> /*
>> * Enumerate supported power management states
>> */
>> - for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3; i++) {
>> + for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3_HOT; i++) {
>> struct acpi_device_power_state *ps = &device->power.states[i];
>> char object_name[5] = { '_', 'P', 'R', '0' + i, '\0' };
>>
>> @@ -884,21 +884,18 @@ static int acpi_bus_get_power_flags(struct acpi_device *device)
>> acpi_bus_add_power_resource(ps->resources.handles[j]);
>> }
>>
>> - /* The exist of _PR3 indicates D3Cold support */
>> - if (i == ACPI_STATE_D3) {
>> - status = acpi_get_handle(device->handle, object_name, &handle);
>> - if (ACPI_SUCCESS(status))
>> - device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1;
>> - }
>> -
>> /* Evaluate "_PSx" to see if we can do explicit sets */
>> object_name[2] = 'S';
>> status = acpi_get_handle(device->handle, object_name, &handle);
>> if (ACPI_SUCCESS(status))
>> ps->flags.explicit_set = 1;
>>
>> - /* State is valid if we have some power control */
>> - if (ps->resources.count || ps->flags.explicit_set)
>> + /*
>> + * State is valid if there are means to put the device into it.
>> + * D3hot is only valid if _PR3 present.
>> + */
>> + if (ps->resources.count ||
>> + (ps->flags.explicit_set && i < ACPI_STATE_D3_HOT))
>> ps->flags.valid = 1;
>>
>> ps->power = -1; /* Unknown - driver assigned */
>> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
>> index 0f150f2..1929c0c 100644
>> --- a/drivers/pci/pci-acpi.c
>> +++ b/drivers/pci/pci-acpi.c
>> @@ -200,7 +200,7 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
>> return PCI_D1;
>> case ACPI_STATE_D2:
>> return PCI_D2;
>> - case ACPI_STATE_D3:
>> + case ACPI_STATE_D3_HOT:
>> return PCI_D3hot;
>> case ACPI_STATE_D3_COLD:
>> return PCI_D3cold;
>> @@ -223,7 +223,7 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
>> [PCI_D0] = ACPI_STATE_D0,
>> [PCI_D1] = ACPI_STATE_D1,
>> [PCI_D2] = ACPI_STATE_D2,
>> - [PCI_D3hot] = ACPI_STATE_D3,
>> + [PCI_D3hot] = ACPI_STATE_D3_HOT,
>> [PCI_D3cold] = ACPI_STATE_D3
>> };
>> int error = -EINVAL;
>> diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
>> index eba6604..e8bcc47 100644
>> --- a/include/acpi/actypes.h
>> +++ b/include/acpi/actypes.h
>> @@ -499,9 +499,10 @@ typedef u64 acpi_integer;
>> #define ACPI_STATE_D0 (u8) 0
>> #define ACPI_STATE_D1 (u8) 1
>> #define ACPI_STATE_D2 (u8) 2
>> -#define ACPI_STATE_D3 (u8) 3
>> -#define ACPI_STATE_D3_COLD (u8) 4
>> -#define ACPI_D_STATES_MAX ACPI_STATE_D3_COLD
>> +#define ACPI_STATE_D3_HOT (u8) 3
>> +#define ACPI_STATE_D3 (u8) 4
>> +#define ACPI_STATE_D3_COLD ACPI_STATE_D3
>> +#define ACPI_D_STATES_MAX ACPI_STATE_D3
>> #define ACPI_D_STATE_COUNT 5
>>
>> #define ACPI_STATE_C0 (u8) 0
>> --
>> 1.7.2.5
>>
>>
>>
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/