RE: [lm-sensors] [PATCH] hwmon: Generic ADC support for hwmon

[Tc, Jenny]

> On 5/15/2012 3:18 PM, Lars-Peter Clausen wrote:
> > On 05/15/2012 03:42 PM, Guenter Roeck wrote:
> >> On Tue, May 15, 2012 at 08:42:57AM -0400, R, Durgadoss wrote:
> >>> Hi Guenter,
> >>>
> >>> Thanks for a quick reply.
> >>>
> >>>> On Tue, May 15, 2012 at 10:26:48AM -0400, Jenny TC wrote:
> >>>>> Currently drivers are using custom APIs to communicate with ADC
> driver.
> >>>>> So it make sense to have generic APIs to commnicate with ADC
> drivers.
> >>>>> This patch introduces generic APIs to communicate with ADC drivers.
> >>>>>
> >>>>> Signed-off-by: Jenny TC<jenny.tc@xxxxxxxxx>
> >>>>
> >>>> Hi Jenny,
> >>>>
> >>>> Do you have a practical use case ?
> >>>
> >>> We have some platform specific component drivers, thermal drivers,
> >>> battery drivers using this General purpose ADC in the platform.
> >>> That's why we thought of doing something like this.
> >>>
> >>>>
> >>>> Also, shouldn't those generic ADCs rather be supported through the
> >>>> IO subsystem ?
> >>>> After all, hwmon is all about hardware monitoring, not to provide
> >>>> generic ADC access.
> >>>
> >>> In this case, can we try this in iio or mfd subsystem ?
> >>> Kindly advise.
> >>>
> >> I meant iio (more specifically staging/iio/adc).
> >>
> >> I suspect it might make more sense to have a hwmon client, in
> >> parallel to the other users/clients (battery control, thermal etc),
> >> if the values reported by the ADC reflect information relevant for
> hardware monitoring.
> >>
> >
> > So there is already an experimental IIO to hwmon bridge in
> > drivers/staging/iio/, which you can use to expose a IIO ADC driver as
> > an hwmon device.
> Thanks Lars-Peter.  That bridge is currently limited to voltage reading but
> that's more because my test part didn't do anything else.
> Trivial to add other bits and bobs as needed.  In the short term, the interrupt
> driven side of things is still under review (so you are limited to polling devices
> - though this is typically fine for hwmon etc).  I'll be submitting a patch to
> move the existing hwmon bridge driver into drivers/hwmon in the next cycle
> (after the IIO core is out of staging).
> 
> Longer term plans involve reducing the connection between the IIO
> userspace front end and the backend to give cleaner support when people
> don't want generic userspace interfaces.  This means making absolutely
> everything under the sun available through generic in kernel interfaces which
> will be 'interesting' for some more interesting devices...
> 
> Jonathan

Hi Jonathan,
Thanks for your reply.
I was looking for generic ADC APIs. At present does the IIO subsystem support any kind of generic ADC APIS which can be used by drivers to read ADC samples?

-jtc

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/