Re: [PATCH 4/6] pstore/ram: Add some more documentation and examples

[Colin Cross]

On Wed, May 16, 2012 at 5:56 AM, Anton Vorontsov
<anton.vorontsov@xxxxxxxxxx> wrote:
> Suggested-by: Shuah Khan <shuahkhan@xxxxxxxxx>
> Signed-off-by: Anton Vorontsov <anton.vorontsov@xxxxxxxxxx>
> ---
>  Documentation/ramoops.txt |   15 +++++++++++++++
>  1 file changed, 15 insertions(+)
>
> diff --git a/Documentation/ramoops.txt b/Documentation/ramoops.txt
> index 4ba7db2..138823b 100644
> --- a/Documentation/ramoops.txt
> +++ b/Documentation/ramoops.txt
> @@ -40,6 +40,12 @@ corrupt, but usually it is restorable.
>  Setting the ramoops parameters can be done in 2 different manners:
>  1. Use the module parameters (which have the names of the variables described
>  as before).
> + For quick debugging, you can also reserve parts of memory during boot
> + and then use the reserved memory for ramoops. For example, assuming a machine
> + with > 128 MB of memory, the following kernel command line will tell the
> + kernel to use only the first 128 MB of memory, and place ECC-protected ramoops
> + region at 128 MB boundary:
> + "mem=128M ramoops.mem_address=0x8000000 ramoops.ecc=1"
>  2. Use a platform device and set the platform data. The parameters can then
>  be set through that platform data. An example of doing that is:
>
> @@ -70,6 +76,15 @@ if (ret) {
>        return ret;
>  }
>
> +You can specify either RAM memory or peripheral devices' memory. However, when
> +specifying RAM, be sure to reserve the memory by issuing memblock_reserve()
> +very early in the architecture code, just before platform device registration,

Just before platform device registration is way too late.  ARM
provides a machine reserve callback to allow board files to call
memblock_reserve inside arm_memblock_init() and before mm_init().

> +e.g.:
> +
> +#include <linux/memblock.h>
> +
> +memblock_reserve(ramoops_data.mem_address, ramoops_data.mem_size);
> +
>  3. Dump format
>
>  The data dump begins with a header, currently defined as "====" followed by a
> --
> 1.7.9.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/