Re: [PATCH] mfd: mc13xxx: Core should not be user visible

[Uwe Kleine-König]

Hello,

On Wed, May 16, 2012 at 06:51:08PM +0100, Mark Brown wrote:
> Since the core is not usable without one of the bus modules it should not
> be presented in the UI but should instead be selected by the bus modules.
> 
> Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/mfd/Kconfig |    8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index ffb7c05..8bc76aa 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -614,7 +614,7 @@ config MFD_MC13783
>  	tristate
>  
>  config MFD_MC13XXX
> -	tristate "Support Freescale MC13783 and MC13892"
> +	tristate
>  	depends on SPI_MASTER || I2C
>  	select MFD_CORE
>  	select MFD_MC13783
> @@ -624,12 +624,11 @@ config MFD_MC13XXX
>  	  additional drivers must be enabled in order to use the
>  	  functionality of the device.
>  
> -if MFD_MC13XXX
> -
>  config MFD_MC13XXX_SPI
>  	tristate "MC13xxx SPI interface" if SPI_MASTER
>  	default SPI_MASTER
>  	select REGMAP_SPI
> +	select MFD_MC13XXX
>  	help
>  	  Select this if your MC13xxx is connected via an SPI bus.
>  
> @@ -637,11 +636,10 @@ config MFD_MC13XXX_I2C
>  	tristate "MC13xxx I2C interface" if I2C
>  	default I2C
>  	select REGMAP_I2C
> +	select MFD_MC13XXX
>  	help
>  	  Select this if your MC13xxx is connected via an I2C bus.
>  
> -endif
> -
If you change the logic in this way please change

	tristate "MC13xxx SPI interface" if SPI_MASTER
	default SPI_MASTER

to

	tristate "Freescale MC13783 and MC13892 SPI interface"
	depends on SPI_MASTER

and similar to the i2c part. IIRC only MC13892 supports i2c.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/