[PATCH V3 1/3] GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
From: John Crispin
Date: Wed May 16 2012 - 16:50:31 EST
Move the 2 drivers from arch/mips/lantiq/xway/ to the subsystem and make them
buildable.
The following 2 patches will convert the drivers to OF.
Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
This patch is part of a series moving the mips/lantiq target to OF and clkdev
support. The patch, once Acked, should go upstream via Ralf's MIPS tree.
arch/mips/lantiq/xway/Makefile | 2 +-
arch/mips/lantiq/xway/gpio_ebu.c | 126 -------------------------------
arch/mips/lantiq/xway/gpio_stp.c | 152 --------------------------------------
drivers/gpio/Kconfig | 18 +++++
drivers/gpio/Makefile | 2 +
drivers/gpio/gpio-mm-lantiq.c | 126 +++++++++++++++++++++++++++++++
drivers/gpio/gpio-stp-xway.c | 152 ++++++++++++++++++++++++++++++++++++++
7 files changed, 299 insertions(+), 279 deletions(-)
delete mode 100644 arch/mips/lantiq/xway/gpio_ebu.c
delete mode 100644 arch/mips/lantiq/xway/gpio_stp.c
create mode 100644 drivers/gpio/gpio-mm-lantiq.c
create mode 100644 drivers/gpio/gpio-stp-xway.c
diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index edef6c5..dc3194f 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1 +1 @@
-obj-y := prom.o sysctrl.o clk.o reset.o gpio.o gpio_stp.o gpio_ebu.o dma.o
+obj-y := prom.o sysctrl.o clk.o reset.o gpio.o dma.o
diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c
deleted file mode 100644
index b91c7f1..0000000
--- a/arch/mips/lantiq/xway/gpio_ebu.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
- */
-
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <lantiq_soc.h>
-
-/*
- * By attaching hardware latches to the EBU it is possible to create output
- * only gpios. This driver configures a special memory address, which when
- * written to outputs 16 bit to the latches.
- */
-
-#define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */
-#define LTQ_EBU_WP 0x80000000 /* write protect bit */
-
-/* we keep a shadow value of the last value written to the ebu */
-static int ltq_ebu_gpio_shadow = 0x0;
-static void __iomem *ltq_ebu_gpio_membase;
-
-static void ltq_ebu_apply(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ebu_lock, flags);
- ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1);
- *((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow;
- ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
- spin_unlock_irqrestore(&ebu_lock, flags);
-}
-
-static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- if (value)
- ltq_ebu_gpio_shadow |= (1 << offset);
- else
- ltq_ebu_gpio_shadow &= ~(1 << offset);
- ltq_ebu_apply();
-}
-
-static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- ltq_ebu_set(chip, offset, value);
-
- return 0;
-}
-
-static struct gpio_chip ltq_ebu_chip = {
- .label = "ltq_ebu",
- .direction_output = ltq_ebu_direction_output,
- .set = ltq_ebu_set,
- .base = 72,
- .ngpio = 16,
- .can_sleep = 1,
- .owner = THIS_MODULE,
-};
-
-static int ltq_ebu_probe(struct platform_device *pdev)
-{
- int ret = 0;
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- if (!res) {
- dev_err(&pdev->dev, "failed to get memory resource\n");
- return -ENOENT;
- }
-
- res = devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), dev_name(&pdev->dev));
- if (!res) {
- dev_err(&pdev->dev, "failed to request memory resource\n");
- return -EBUSY;
- }
-
- ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start,
- resource_size(res));
- if (!ltq_ebu_gpio_membase) {
- dev_err(&pdev->dev, "Failed to ioremap mem region\n");
- return -ENOMEM;
- }
-
- /* grab the default shadow value passed form the platform code */
- ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data;
-
- /* tell the ebu controller which memory address we will be using */
- ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1);
-
- /* write protect the region */
- ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
-
- ret = gpiochip_add(<q_ebu_chip);
- if (!ret)
- ltq_ebu_apply();
- return ret;
-}
-
-static struct platform_driver ltq_ebu_driver = {
- .probe = ltq_ebu_probe,
- .driver = {
- .name = "ltq_ebu",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init ltq_ebu_init(void)
-{
- int ret = platform_driver_register(<q_ebu_driver);
-
- if (ret)
- pr_info("ltq_ebu : Error registering platfom driver!");
- return ret;
-}
-
-postcore_initcall(ltq_ebu_init);
diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c
deleted file mode 100644
index d674f1b..0000000
--- a/arch/mips/lantiq/xway/gpio_stp.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * Copyright (C) 2007 John Crispin <blogic@xxxxxxxxxxx>
- *
- */
-
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <lantiq_soc.h>
-
-#define LTQ_STP_CON0 0x00
-#define LTQ_STP_CON1 0x04
-#define LTQ_STP_CPU0 0x08
-#define LTQ_STP_CPU1 0x0C
-#define LTQ_STP_AR 0x10
-
-#define LTQ_STP_CON_SWU (1 << 31)
-#define LTQ_STP_2HZ 0
-#define LTQ_STP_4HZ (1 << 23)
-#define LTQ_STP_8HZ (2 << 23)
-#define LTQ_STP_10HZ (3 << 23)
-#define LTQ_STP_SPEED_MASK (0xf << 23)
-#define LTQ_STP_UPD_FPI (1 << 31)
-#define LTQ_STP_UPD_MASK (3 << 30)
-#define LTQ_STP_ADSL_SRC (3 << 24)
-
-#define LTQ_STP_GROUP0 (1 << 0)
-
-#define LTQ_STP_RISING 0
-#define LTQ_STP_FALLING (1 << 26)
-#define LTQ_STP_EDGE_MASK (1 << 26)
-
-#define ltq_stp_r32(reg) __raw_readl(ltq_stp_membase + reg)
-#define ltq_stp_w32(val, reg) __raw_writel(val, ltq_stp_membase + reg)
-#define ltq_stp_w32_mask(clear, set, reg) \
- ltq_w32((ltq_r32(ltq_stp_membase + reg) & ~(clear)) | (set), \
- ltq_stp_membase + (reg))
-
-static int ltq_stp_shadow = 0xffff;
-static void __iomem *ltq_stp_membase;
-
-static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- if (value)
- ltq_stp_shadow |= (1 << offset);
- else
- ltq_stp_shadow &= ~(1 << offset);
- ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0);
-}
-
-static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- ltq_stp_set(chip, offset, value);
-
- return 0;
-}
-
-static struct gpio_chip ltq_stp_chip = {
- .label = "ltq_stp",
- .direction_output = ltq_stp_direction_output,
- .set = ltq_stp_set,
- .base = 48,
- .ngpio = 24,
- .can_sleep = 1,
- .owner = THIS_MODULE,
-};
-
-static int ltq_stp_hw_init(void)
-{
- /* sane defaults */
- ltq_stp_w32(0, LTQ_STP_AR);
- ltq_stp_w32(0, LTQ_STP_CPU0);
- ltq_stp_w32(0, LTQ_STP_CPU1);
- ltq_stp_w32(LTQ_STP_CON_SWU, LTQ_STP_CON0);
- ltq_stp_w32(0, LTQ_STP_CON1);
-
- /* rising or falling edge */
- ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0);
-
- /* per default stp 15-0 are set */
- ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1);
-
- /* stp are update periodically by the FPI bus */
- ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1);
-
- /* set stp update speed */
- ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1);
-
- /* tell the hardware that pin (led) 0 and 1 are controlled
- * by the dsl arc
- */
- ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0);
-
- ltq_pmu_enable(PMU_LED);
- return 0;
-}
-
-static int __devinit ltq_stp_probe(struct platform_device *pdev)
-{
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- int ret = 0;
-
- if (!res)
- return -ENOENT;
- res = devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), dev_name(&pdev->dev));
- if (!res) {
- dev_err(&pdev->dev, "failed to request STP memory\n");
- return -EBUSY;
- }
- ltq_stp_membase = devm_ioremap_nocache(&pdev->dev, res->start,
- resource_size(res));
- if (!ltq_stp_membase) {
- dev_err(&pdev->dev, "failed to remap STP memory\n");
- return -ENOMEM;
- }
- ret = gpiochip_add(<q_stp_chip);
- if (!ret)
- ret = ltq_stp_hw_init();
-
- return ret;
-}
-
-static struct platform_driver ltq_stp_driver = {
- .probe = ltq_stp_probe,
- .driver = {
- .name = "ltq_stp",
- .owner = THIS_MODULE,
- },
-};
-
-int __init ltq_stp_init(void)
-{
- int ret = platform_driver_register(<q_stp_driver);
-
- if (ret)
- pr_info("ltq_stp: error registering platfom driver");
- return ret;
-}
-
-postcore_initcall(ltq_stp_init);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e03653d..8fae079 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -96,6 +96,14 @@ config GPIO_EP93XX
depends on ARCH_EP93XX
select GPIO_GENERIC
+config GPIO_MM_LANTIQ
+ bool "Lantiq Memory mapped GPIOs"
+ depends on LANTIQ && SOC_XWAY
+ help
+ This enables support for memory mapped GPIOs on the External Bus Unit
+ (EBU) found on Lantiq SoCs. The gpios are output only as they are
+ created by attaching a 16bit latch to the bus.
+
config GPIO_MPC5200
def_bool y
depends on PPC_MPC52xx
@@ -306,6 +314,16 @@ config GPIO_STMPE
This enables support for the GPIOs found on the STMPE I/O
Expanders.
+config GPIO_STP_XWAY
+ bool "XWAY STP GPIOs"
+ depends on SOC_XWAY
+ help
+ This enables support for the Serial To Parallel (STP) unit found on
+ XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
+ that can be up to 24 bit. This peripheral is aimed at driving leds.
+ Some of the gpios/leds can be auto updated by the soc with dsl and
+ phy status.
+
config GPIO_TC3589X
bool "TC3589X GPIOs"
depends on MFD_TC3589X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 007f54b..ed1c96d 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o
obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o
obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
+obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o
obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o
obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o
obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o
@@ -49,6 +50,7 @@ obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
+obj-$(CONFIG_GPIO_STP_XWAY) += gpio-stp-xway.o
obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o
obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o
obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o
diff --git a/drivers/gpio/gpio-mm-lantiq.c b/drivers/gpio/gpio-mm-lantiq.c
new file mode 100644
index 0000000..b91c7f1
--- /dev/null
+++ b/drivers/gpio/gpio-mm-lantiq.c
@@ -0,0 +1,126 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2010 John Crispin <blogic@xxxxxxxxxxx>
+ */
+
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <lantiq_soc.h>
+
+/*
+ * By attaching hardware latches to the EBU it is possible to create output
+ * only gpios. This driver configures a special memory address, which when
+ * written to outputs 16 bit to the latches.
+ */
+
+#define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */
+#define LTQ_EBU_WP 0x80000000 /* write protect bit */
+
+/* we keep a shadow value of the last value written to the ebu */
+static int ltq_ebu_gpio_shadow = 0x0;
+static void __iomem *ltq_ebu_gpio_membase;
+
+static void ltq_ebu_apply(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ebu_lock, flags);
+ ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1);
+ *((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow;
+ ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
+ spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ if (value)
+ ltq_ebu_gpio_shadow |= (1 << offset);
+ else
+ ltq_ebu_gpio_shadow &= ~(1 << offset);
+ ltq_ebu_apply();
+}
+
+static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ ltq_ebu_set(chip, offset, value);
+
+ return 0;
+}
+
+static struct gpio_chip ltq_ebu_chip = {
+ .label = "ltq_ebu",
+ .direction_output = ltq_ebu_direction_output,
+ .set = ltq_ebu_set,
+ .base = 72,
+ .ngpio = 16,
+ .can_sleep = 1,
+ .owner = THIS_MODULE,
+};
+
+static int ltq_ebu_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get memory resource\n");
+ return -ENOENT;
+ }
+
+ res = devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), dev_name(&pdev->dev));
+ if (!res) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ return -EBUSY;
+ }
+
+ ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start,
+ resource_size(res));
+ if (!ltq_ebu_gpio_membase) {
+ dev_err(&pdev->dev, "Failed to ioremap mem region\n");
+ return -ENOMEM;
+ }
+
+ /* grab the default shadow value passed form the platform code */
+ ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data;
+
+ /* tell the ebu controller which memory address we will be using */
+ ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1);
+
+ /* write protect the region */
+ ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1);
+
+ ret = gpiochip_add(<q_ebu_chip);
+ if (!ret)
+ ltq_ebu_apply();
+ return ret;
+}
+
+static struct platform_driver ltq_ebu_driver = {
+ .probe = ltq_ebu_probe,
+ .driver = {
+ .name = "ltq_ebu",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ltq_ebu_init(void)
+{
+ int ret = platform_driver_register(<q_ebu_driver);
+
+ if (ret)
+ pr_info("ltq_ebu : Error registering platfom driver!");
+ return ret;
+}
+
+postcore_initcall(ltq_ebu_init);
diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c
new file mode 100644
index 0000000..d674f1b
--- /dev/null
+++ b/drivers/gpio/gpio-stp-xway.c
@@ -0,0 +1,152 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2007 John Crispin <blogic@xxxxxxxxxxx>
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <lantiq_soc.h>
+
+#define LTQ_STP_CON0 0x00
+#define LTQ_STP_CON1 0x04
+#define LTQ_STP_CPU0 0x08
+#define LTQ_STP_CPU1 0x0C
+#define LTQ_STP_AR 0x10
+
+#define LTQ_STP_CON_SWU (1 << 31)
+#define LTQ_STP_2HZ 0
+#define LTQ_STP_4HZ (1 << 23)
+#define LTQ_STP_8HZ (2 << 23)
+#define LTQ_STP_10HZ (3 << 23)
+#define LTQ_STP_SPEED_MASK (0xf << 23)
+#define LTQ_STP_UPD_FPI (1 << 31)
+#define LTQ_STP_UPD_MASK (3 << 30)
+#define LTQ_STP_ADSL_SRC (3 << 24)
+
+#define LTQ_STP_GROUP0 (1 << 0)
+
+#define LTQ_STP_RISING 0
+#define LTQ_STP_FALLING (1 << 26)
+#define LTQ_STP_EDGE_MASK (1 << 26)
+
+#define ltq_stp_r32(reg) __raw_readl(ltq_stp_membase + reg)
+#define ltq_stp_w32(val, reg) __raw_writel(val, ltq_stp_membase + reg)
+#define ltq_stp_w32_mask(clear, set, reg) \
+ ltq_w32((ltq_r32(ltq_stp_membase + reg) & ~(clear)) | (set), \
+ ltq_stp_membase + (reg))
+
+static int ltq_stp_shadow = 0xffff;
+static void __iomem *ltq_stp_membase;
+
+static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ if (value)
+ ltq_stp_shadow |= (1 << offset);
+ else
+ ltq_stp_shadow &= ~(1 << offset);
+ ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0);
+}
+
+static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ ltq_stp_set(chip, offset, value);
+
+ return 0;
+}
+
+static struct gpio_chip ltq_stp_chip = {
+ .label = "ltq_stp",
+ .direction_output = ltq_stp_direction_output,
+ .set = ltq_stp_set,
+ .base = 48,
+ .ngpio = 24,
+ .can_sleep = 1,
+ .owner = THIS_MODULE,
+};
+
+static int ltq_stp_hw_init(void)
+{
+ /* sane defaults */
+ ltq_stp_w32(0, LTQ_STP_AR);
+ ltq_stp_w32(0, LTQ_STP_CPU0);
+ ltq_stp_w32(0, LTQ_STP_CPU1);
+ ltq_stp_w32(LTQ_STP_CON_SWU, LTQ_STP_CON0);
+ ltq_stp_w32(0, LTQ_STP_CON1);
+
+ /* rising or falling edge */
+ ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0);
+
+ /* per default stp 15-0 are set */
+ ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1);
+
+ /* stp are update periodically by the FPI bus */
+ ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1);
+
+ /* set stp update speed */
+ ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1);
+
+ /* tell the hardware that pin (led) 0 and 1 are controlled
+ * by the dsl arc
+ */
+ ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0);
+
+ ltq_pmu_enable(PMU_LED);
+ return 0;
+}
+
+static int __devinit ltq_stp_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int ret = 0;
+
+ if (!res)
+ return -ENOENT;
+ res = devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), dev_name(&pdev->dev));
+ if (!res) {
+ dev_err(&pdev->dev, "failed to request STP memory\n");
+ return -EBUSY;
+ }
+ ltq_stp_membase = devm_ioremap_nocache(&pdev->dev, res->start,
+ resource_size(res));
+ if (!ltq_stp_membase) {
+ dev_err(&pdev->dev, "failed to remap STP memory\n");
+ return -ENOMEM;
+ }
+ ret = gpiochip_add(<q_stp_chip);
+ if (!ret)
+ ret = ltq_stp_hw_init();
+
+ return ret;
+}
+
+static struct platform_driver ltq_stp_driver = {
+ .probe = ltq_stp_probe,
+ .driver = {
+ .name = "ltq_stp",
+ .owner = THIS_MODULE,
+ },
+};
+
+int __init ltq_stp_init(void)
+{
+ int ret = platform_driver_register(<q_stp_driver);
+
+ if (ret)
+ pr_info("ltq_stp: error registering platfom driver");
+ return ret;
+}
+
+postcore_initcall(ltq_stp_init);
--
1.7.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/