Re: Clock register in early init

[Turquette, Mike]

On Mon, May 21, 2012 at 1:46 AM, Peter De Schrijver
<pdeschrijver@xxxxxxxxxx> wrote:
>>
>> On OMAP I think the only "gotcha" is setting up the timer.  One
>> solution is to open code the register reads and the rate calculation
>> in the timer code.  That is ugly... but it works.
>>
>> > Which advantages do you see in dynamically allocating all this?
>> >
>>
>> There are many but I'll name a couple.  The most significant point is
>> that we can avoid exposing the definition of struct clk if we
>> dynamically allocate stuff.  One can use struct clk_hw_init to
>> statically initialize data, or instead rely on direct calls to
>> clk_register with a bunch of parameters.
>>
>
> Which means if you make a mistake in specifying parents for example, it will
> only fail at runtime, possibly before any console is active. With static
> initialization, this will fail at compiletime. Much easier to debug.
>

Is this really a problem?  Once you have good data it does not change.
 Debugging bad data when introducing a new chip is just a fact of
life.  Static versus dynamic is irrelevant here.

>> Another point is that copying the data at registration-time makes
>> __initdata possible.  I haven't done the math yet to see if this
>> really makes a difference.  However if we start doing single zImage's
>> with multiple different ARM SoCs then this could recover some pages.
>>
>
> On the other hand most clock structures are small, so there will be internal
> fragmentation. Also the arrays of parent clock pointers can be shared between
> different clocks. We have about 70 muxes in Tegra30 and 12 different parent
> arrays.
>

What is missing from struct clk_hw_init to do what your static arrays do today?

Thanks,
Mike

> Cheers,
>
> Peter.
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/