[GIT PULL 6/8] arm-soc: soc-specific pinctrl changes
From: Olof Johansson
Date: Tue May 22 2012 - 01:38:37 EST
With this, five platforms are moving to the relatively new pinctrl
subsystem for their pin management, replacing the older soc specific
in-kernel interfaces with common code.
There is quite a bit of net addition of code for each platform being
added to the pinctrl subsystem. but the payback comes later when adding
new boards can be done by only providing new device trees instead.
Merge conflicts from this branch:
* add/remove context conflict in ux500 Makefile. Delete u5500 files,
keep mop500-msp.
* remove/remove context conflict in board-mop500.c dealing with i2c and
pinmux setup. Both sides of the conflict should be removed.
----------------------------------------------------------------
The following changes since commit 6e7e7311a85042150257384de1cc5b69ebaa56a9:
Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into HEAD
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/pinctrl
for you to fetch changes up to f3f08dcb9965f42378851ce888fb7539607712e6:
Merge branch 'imx/pinctrl' into next/pinctrl
----------------------------------------------------------------
Arnd Bergmann (6):
Merge branch 'spear/pinctrl' into next/pinctrl
Merge branch 'ux500-gpio-pins-for-arm-soc' of git://git.kernel.org/.../linusw/linux-stericsson into next/gpio
pinctrl/nomadik: !CONFIG_OF build error
Merge branches 'depends/pinctrl/devel' and 'depends/rmk/clkdev' into spear/pinctrl
Merge branch 'spear/pinctrl' into next/pinctrl
ARM: nomadik: enable PINCTRL_NOMADIK where needed
Barry Song (1):
ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig
Dong Aisheng (3):
ARM: imx: enable pinctrl dummy states
ARM: imx6q: switch to use pinctrl subsystem
mmc: sdhci-imx-esdhc: adopt pinctrl support
Lee Jones (2):
drivers/gpio: gpio-nomadik: Apply Device Tree bindings
drivers/gpio: gpio-nomadik: Add support for irqdomains
Linus Walleij (17):
gpio/nomadik: use ioremap() instead of static mappings
plat-nomadik: new sleep mode pincfg macros
ARM: ux500: remove a bunch of internal pull-ups
ARM: ux500: update pin handling
Merge tag 'pinctrl-mergebase-20120418' into HEAD
gpio: move the Nomadik GPIO driver to pinctrl
pinctrl/nomadik: basic Nomadik pinctrl interface
pinctrl/nomadik: break out single GPIO debug function
pinctrl/nomadik: reuse GPIO debug function for pins
pinctrl/nomadik: implement pin multiplexing
pinctrl/nomadik: implement pin configuration
pinctrl: add sleep state definition
ARM: ux500: switch over to Nomadik pinctrl driver
ARM: ux500: delete custom pin control system
ARM: ux500: switch to using pinctrl for uart0
ARM: ux500: alter MSP registration to return a device pointer
ARM: ux500: switch MSP to using pinctrl for pins
Ola Lilja (1):
ARM: ux500: Add support for MSP I2S-devices
Olof Johansson (5):
Merge tag 'pinctrl-mergebase-20120418' of git://git.kernel.org/.../linusw/linux-pinctrl into next/pinctrl
Merge branch 'for-3.5/gpio-pinmux' of git://git.kernel.org/.../swarren/linux-tegra into next/pinctrl
Merge branch 'imx/pinctrl/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/pinctrl
Merge tag 'ux500-gpio-pins-for-3.5' of git://git.kernel.org/.../linusw/linux-stericsson into next/pinctrl
Merge branch 'imx/pinctrl' into next/pinctrl
Rabin Vincent (5):
gpio/nomadik: don't set SLPM to 1 for non-wakeup pins
gpio/nomadik: cache [rf]w?imsc
gpio/nomadik: fix spurious interrupts with SKE
gpio/nomadik: support low EMI mode
ARM: ux500: implement pin API
Shawn Guo (15):
ARM: mxs: enable pinctrl dummy states
tty: serial: imx: adopt pinctrl support
net: fec: adopt pinctrl support
can: flexcan: adopt pinctrl support
i2c: imx: adopt pinctrl support
spi/imx: adopt pinctrl support
serial: amba-pl011: adopt pinctrl support
serial: mxs-auart: adopt pinctrl support
mmc: mxs-mmc: adopt pinctrl support
mtd: nand: gpmi: adopt pinctrl support
i2c: mxs: adopt pinctrl support
ASoC: mxs-saif: adopt pinctrl support
video: mxsfb: adopt pinctrl support
ARM: mxs: enable pinctrl support
mtd: nand: gpmi: fix compile error caused by pinctrl call
Stephen Warren (12):
usb: ehci-tegra: Add vbus_gpio to platform data
ARM: tegra: Remove VBUS_GPIO handling from board files
gpio: tegra: configure pins during irq_set_type
ARM: tegra: seaboard: Don't gpio_request() ISL29018_IRQ
gpio: tegra: Hide tegra_gpio_enable/disable()
ARM: tegra: Switch to new pinctrl driver
ARM: tegra: Remove pre-pinctrl pinmux driver
ARM: dt: tegra cardhu: add pinmux to device tree
ARM: dt: tegra20: add pinmux to device tree
pinctrl: tegra: refactor probe handling
pinctrl: tegra: debugfs enhancements
pinctrl: tegra: error reporting cleanup
Viresh Kumar (4):
pinctrl: Add SPEAr pinctrl drivers
pinctrl: Add SPEAr3xx pinctrl drivers
SPEAr: Remove existing padmux support for SPEAr
SPEAr3xx: Add pinctrl support for boards
.../bindings/pinctrl/pinctrl_spear.txt | 108 +
MAINTAINERS | 23 +-
arch/arm/Kconfig | 4 +
arch/arm/boot/dts/spear300-evb.dts | 38 +
arch/arm/boot/dts/spear300.dtsi | 5 +
arch/arm/boot/dts/spear310-evb.dts | 61 +
arch/arm/boot/dts/spear310.dtsi | 5 +
arch/arm/boot/dts/spear320-evb.dts | 61 +
arch/arm/boot/dts/spear320.dtsi | 7 +-
arch/arm/boot/dts/tegra-cardhu.dts | 44 +
arch/arm/boot/dts/tegra-harmony.dts | 224 ++
arch/arm/boot/dts/tegra-paz00.dts | 220 ++
arch/arm/boot/dts/tegra-seaboard.dts | 243 ++
arch/arm/boot/dts/tegra-trimslice.dts | 230 ++
arch/arm/boot/dts/tegra-ventana.dts | 230 ++
arch/arm/configs/nhk8815_defconfig | 1 +
arch/arm/mach-imx/Kconfig | 2 +
arch/arm/mach-imx/imx51-dt.c | 3 +
arch/arm/mach-imx/imx53-dt.c | 3 +
arch/arm/mach-imx/mach-imx6q.c | 7 +
arch/arm/mach-imx/mm-imx1.c | 2 +
arch/arm/mach-imx/mm-imx21.c | 2 +
arch/arm/mach-imx/mm-imx25.c | 2 +
arch/arm/mach-imx/mm-imx27.c | 2 +
arch/arm/mach-imx/mm-imx3.c | 2 +
arch/arm/mach-imx/mm-imx5.c | 2 +
arch/arm/mach-mxs/Kconfig | 2 +
arch/arm/mach-mxs/include/mach/common.h | 2 +
arch/arm/mach-mxs/mach-apx4devkit.c | 2 +
arch/arm/mach-mxs/mach-m28evk.c | 2 +
arch/arm/mach-mxs/mach-mx23evk.c | 2 +
arch/arm/mach-mxs/mach-mx28evk.c | 2 +
arch/arm/mach-mxs/mach-stmp378x_devb.c | 2 +
arch/arm/mach-mxs/mach-tx28.c | 2 +
arch/arm/mach-mxs/mm.c | 11 +
arch/arm/mach-nomadik/Kconfig | 1 +
arch/arm/mach-spear3xx/Kconfig | 3 +
arch/arm/mach-spear3xx/include/mach/generic.h | 128 -
arch/arm/mach-spear3xx/spear300.c | 389 +-
arch/arm/mach-spear3xx/spear310.c | 161 +-
arch/arm/mach-spear3xx/spear320.c | 403 +-
arch/arm/mach-spear3xx/spear3xx.c | 425 ---
arch/arm/mach-tegra/Makefile | 3 -
arch/arm/mach-tegra/board-dt-tegra20.c | 31 -
arch/arm/mach-tegra/board-harmony-pinmux.c | 266 +-
arch/arm/mach-tegra/board-paz00-pinmux.c | 263 +-
arch/arm/mach-tegra/board-pinmux.c | 105 +-
arch/arm/mach-tegra/board-pinmux.h | 40 +-
arch/arm/mach-tegra/board-seaboard-pinmux.c | 346 +-
arch/arm/mach-tegra/board-seaboard.c | 21 +-
arch/arm/mach-tegra/board-trimslice-pinmux.c | 264 +-
arch/arm/mach-tegra/board-trimslice.c | 15 +-
arch/arm/mach-tegra/devices.c | 5 +-
arch/arm/mach-tegra/include/mach/gpio-tegra.h | 9 -
.../mach-tegra/include/mach/pinmux-tegra20.h | 184 -
.../mach-tegra/include/mach/pinmux-tegra30.h | 320 --
arch/arm/mach-tegra/include/mach/pinmux.h | 302 --
arch/arm/mach-tegra/pinmux-tegra20-tables.c | 244 --
arch/arm/mach-tegra/pinmux-tegra30-tables.c | 376 --
arch/arm/mach-tegra/pinmux.c | 987 -----
arch/arm/mach-tegra/usb_phy.c | 1 -
arch/arm/mach-ux500/Kconfig | 3 +
arch/arm/mach-ux500/Makefile | 3 +-
arch/arm/mach-ux500/board-mop500-msp.c | 267 ++
arch/arm/mach-ux500/board-mop500-msp.h | 14 +
arch/arm/mach-ux500/board-mop500-pins.c | 733 ++--
arch/arm/mach-ux500/board-mop500.c | 99 +-
arch/arm/mach-ux500/board-mop500.h | 10 +-
arch/arm/mach-ux500/clock.c | 8 +-
arch/arm/mach-ux500/cpu-db8500.c | 1 +
arch/arm/mach-ux500/cpu.c | 12 +
arch/arm/mach-ux500/devices-common.h | 12 +
arch/arm/mach-ux500/devices-db8500.h | 10 -
arch/arm/mach-ux500/include/mach/msp.h | 29 +
arch/arm/mach-ux500/pins-db8500.h | 72 +-
.../plat-nomadik/include/plat/gpio-nomadik.h | 8 +
arch/arm/plat-nomadik/include/plat/pincfg.h | 32 +
arch/arm/plat-spear/Kconfig | 1 +
arch/arm/plat-spear/Makefile | 2 +-
arch/arm/plat-spear/include/plat/padmux.h | 92 -
arch/arm/plat-spear/padmux.c | 164 -
drivers/gpio/Makefile | 1 -
drivers/gpio/gpio-tegra.c | 39 +-
drivers/i2c/busses/i2c-imx.c | 8 +
drivers/i2c/busses/i2c-mxs.c | 6 +
drivers/mmc/host/mxs-mmc.c | 8 +
drivers/mmc/host/sdhci-esdhc-imx.c | 9 +
drivers/mmc/host/sdhci-tegra.c | 24 +-
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 9 +
drivers/net/can/flexcan.c | 6 +
drivers/net/ethernet/freescale/fec.c | 9 +
drivers/pinctrl/Kconfig | 12 +
drivers/pinctrl/Makefile | 4 +
drivers/pinctrl/pinctrl-nomadik-db8500.c | 857 +++++
.../pinctrl-nomadik.c} | 857 ++++-
drivers/pinctrl/pinctrl-nomadik.h | 77 +
drivers/pinctrl/pinctrl-tegra.c | 236 +-
drivers/pinctrl/pinctrl-tegra.h | 23 +-
drivers/pinctrl/pinctrl-tegra20.c | 40 +-
drivers/pinctrl/pinctrl-tegra30.c | 40 +-
drivers/pinctrl/spear/Kconfig | 34 +
drivers/pinctrl/spear/Makefile | 7 +
drivers/pinctrl/spear/pinctrl-spear.c | 354 ++
drivers/pinctrl/spear/pinctrl-spear.h | 142 +
drivers/pinctrl/spear/pinctrl-spear300.c | 708 ++++
drivers/pinctrl/spear/pinctrl-spear310.c | 431 +++
drivers/pinctrl/spear/pinctrl-spear320.c | 3468 ++++++++++++++++++
drivers/pinctrl/spear/pinctrl-spear3xx.c | 588 +++
drivers/pinctrl/spear/pinctrl-spear3xx.h | 92 +
drivers/spi/spi-imx.c | 8 +
drivers/tty/serial/amba-pl011.c | 8 +
drivers/tty/serial/imx.c | 8 +
drivers/tty/serial/mxs-auart.c | 8 +
drivers/usb/host/ehci-tegra.c | 13 +-
drivers/video/mxsfb.c | 9 +
include/linux/pinctrl/pinctrl-state.h | 13 +
include/linux/platform_data/tegra_usb.h | 1 +
sound/soc/mxs/mxs-saif.c | 8 +
118 files changed, 10999 insertions(+), 5588 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
delete mode 100644 arch/arm/mach-tegra/include/mach/pinmux-tegra20.h
delete mode 100644 arch/arm/mach-tegra/include/mach/pinmux-tegra30.h
delete mode 100644 arch/arm/mach-tegra/include/mach/pinmux.h
delete mode 100644 arch/arm/mach-tegra/pinmux-tegra20-tables.c
delete mode 100644 arch/arm/mach-tegra/pinmux-tegra30-tables.c
delete mode 100644 arch/arm/mach-tegra/pinmux.c
create mode 100644 arch/arm/mach-ux500/board-mop500-msp.c
create mode 100644 arch/arm/mach-ux500/board-mop500-msp.h
create mode 100644 arch/arm/mach-ux500/include/mach/msp.h
delete mode 100644 arch/arm/plat-spear/include/plat/padmux.h
delete mode 100644 arch/arm/plat-spear/padmux.c
create mode 100644 drivers/pinctrl/pinctrl-nomadik-db8500.c
rename drivers/{gpio/gpio-nomadik.c => pinctrl/pinctrl-nomadik.c} (56%)
create mode 100644 drivers/pinctrl/pinctrl-nomadik.h
create mode 100644 drivers/pinctrl/spear/Kconfig
create mode 100644 drivers/pinctrl/spear/Makefile
create mode 100644 drivers/pinctrl/spear/pinctrl-spear.c
create mode 100644 drivers/pinctrl/spear/pinctrl-spear.h
create mode 100644 drivers/pinctrl/spear/pinctrl-spear300.c
create mode 100644 drivers/pinctrl/spear/pinctrl-spear310.c
create mode 100644 drivers/pinctrl/spear/pinctrl-spear320.c
create mode 100644 drivers/pinctrl/spear/pinctrl-spear3xx.c
create mode 100644 drivers/pinctrl/spear/pinctrl-spear3xx.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/