Re: [PATCH v4] MTD: LPC32xx SLC NAND driver

From: Russell King - ARM Linux
Date: Sun Jun 03 2012 - 15:10:44 EST


On Sun, Jun 03, 2012 at 08:38:09PM +0200, Roland Stigge wrote:
> +static int lpc32xx_xmit_dma(struct mtd_info *mtd, dma_addr_t dma,
> + void *mem, int len, enum dma_transfer_direction dir)
> +{
> + struct nand_chip *chip = mtd->priv;
> + struct lpc32xx_nand_host *host = chip->priv;
> + struct dma_async_tx_descriptor *desc;
> + int flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
> + int res;
> + dma_cookie_t cookie;
> +
> + host->dma_slave_config.direction = dir;
> + host->dma_slave_config.src_addr = dma;
> + host->dma_slave_config.dst_addr = dma;
> + host->dma_slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> + host->dma_slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> + host->dma_slave_config.src_maxburst = 4;
> + host->dma_slave_config.dst_maxburst = 4;
> + /* DMA controller does flow control: */
> + host->dma_slave_config.device_fc = false;
> + if (dmaengine_slave_config(host->dma_chan, &host->dma_slave_config)) {
> + dev_err(mtd->dev.parent, "Failed to setup DMA slave\n");
> + return -ENXIO;
> + }
> +
> + sg_init_one(&host->sgl, mem, len);
> +
> + res = dma_map_sg(host->dma_chan->device->dev, &host->sgl, 1,
> + DMA_BIDIRECTIONAL);
> + if (res != 1) {
> + dev_err(mtd->dev.parent, "Failed to map sg list\n");
> + return -ENXIO;
> + }
> + desc = dmaengine_prep_slave_sg(host->dma_chan, &host->sgl, 1, dir,
> + flags);
> + if (!desc) {
> + dev_err(mtd->dev.parent, "Failed to prepare slave sg\n");
> + goto out1;
> + }
> +
> + init_completion(&host->comp);
> + desc->callback = lpc32xx_dma_complete_func;
> + desc->callback_param = &host->comp;
> +
> + cookie = dmaengine_submit(desc);
> + if (dma_submit_error(cookie)) {
> + dev_err(mtd->dev.parent, "Failed to dmaengine_submit()\n");
> + goto out1;
> + }

dmaengine_submit() is no longer allowed to fail, so you don't need this
check here anymore. It's been that way for a long time.

> + dma_async_issue_pending(host->dma_chan);
> +
> + wait_for_completion_timeout(&host->comp, msecs_to_jiffies(1000));

What about unmapping the buffer upon completion?

> +
> + return 0;
> +out1:
> + dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
> + DMA_BIDIRECTIONAL);
> + return -ENXIO;
> +}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/