ERASE_WR_BLK_START Sets the address of the first write block to be Index address erased.
ERASE_WR_BLK_END Sets the address of the last write block of the address continuous range to be erased.
When I read reports from (non-expert) users who claimed that they were able
to restore the initial write performance of their SDXC cards by using a "special
formatter tool" (while normal "formatting" did not improve performance),
I was very sceptical, as I also had read that there is no way to discard/TRIM
blocks on SD/SDHC/SDXC cards.
But then I noticed that this "special formatter" tool was actually offered (for free)
by the SD Association:
https://www.sdcard.org/downloads/formatter_3/
... and its documentation clearly states that this tool is capable of using
"flash erase" operations on SD cards, which are said to be different from
ordinary "overwrites", see
https://www.sdcard.org/downloads/formatter_3/SDFormatter_3.1e.pdf
pages 7 ("Format type Erase" vs. "Format type Overwrite") and the screen shot on page 9.
Now I wonder: Is there really such a thing as a command to erase NAND flashes
in SD cards like there is for SSDs? If so, it would certainly be a good thing
to support it with Linux block discard...
Regards,
Lutz Vieweg