[PATCH 1/2] edac: add support for Calxeda highbank memory controller
From: Rob Herring
Date: Wed Jun 06 2012 - 18:02:20 EST
From: Rob Herring <rob.herring@xxxxxxxxxxx>
Add support for memory controller on Calxeda Highbank platforms. Highbank
platforms support a single 4GB mini-DIMM with 1-bit correction and 2-bit
detection.
Signed-off-by: Rob Herring <rob.herring@xxxxxxxxxxx>
---
.../devicetree/bindings/arm/calxeda/mem-ctrlr.txt | 17 ++
arch/arm/boot/dts/highbank.dts | 6 +
drivers/edac/Kconfig | 9 +-
drivers/edac/Makefile | 2 +
drivers/edac/highbank_mc_edac.c | 238 ++++++++++++++++++++
5 files changed, 271 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt
create mode 100644 drivers/edac/highbank_mc_edac.c
diff --git a/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt b/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt
new file mode 100644
index 0000000..5c74a0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt
@@ -0,0 +1,17 @@
+Calxeda DDR memory controller
+
+Properties:
+- compatible : Should be "calxeda,hb-ddr-ctrl"
+- reg : Address and size for DDR controller registers.
+- interrupts : Interrupt for DDR controller.
+
+Example:
+
+ memory-controller@fff00000 {
+ compatible = "calxeda,hb-ddr-ctrl";
+ reg = <0xfff00000 0x1000>;
+ interrupts = <0 91 4>;
+ };
+
+
+
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 83e7229..d4b4941 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -118,6 +118,12 @@
interrupts = <0 90 4>;
};
+ memory-controller@fff00000 {
+ compatible = "calxeda,hb-ddr-ctrl";
+ reg = <0xfff00000 0x1000>;
+ interrupts = <0 91 4>;
+ };
+
ipc@fff20000 {
compatible = "arm,pl320", "arm,primecell";
reg = <0xfff20000 0x1000>;
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index fdffa1b..2d01a53 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -7,7 +7,7 @@
menuconfig EDAC
bool "EDAC (Error Detection And Correction) reporting"
depends on HAS_IOMEM
- depends on X86 || PPC || TILE
+ depends on X86 || PPC || TILE || ARM
help
EDAC is designed to report errors in the core system.
These are low-level errors that are reported in the CPU or
@@ -294,4 +294,11 @@ config EDAC_TILE
Support for error detection and correction on the
Tilera memory controller.
+config EDAC_HIGHBANK_MC
+ tristate "Highbank Memory Controller"
+ depends on EDAC_MM_EDAC && ARCH_HIGHBANK
+ help
+ Support for error detection and correction on the
+ Calxeda Highbank memory controller.
+
endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 196a63d..44f2044 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -55,3 +55,5 @@ obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o
obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o
obj-$(CONFIG_EDAC_TILE) += tile_edac.o
+
+obj-$(CONFIG_EDAC_HIGHBANK_MC) += highbank_mc_edac.o
diff --git a/drivers/edac/highbank_mc_edac.c b/drivers/edac/highbank_mc_edac.c
new file mode 100644
index 0000000..65951ffb
--- /dev/null
+++ b/drivers/edac/highbank_mc_edac.c
@@ -0,0 +1,238 @@
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+
+#include "edac_core.h"
+#include "edac_module.h"
+
+/* DDR Ctrlr Error Registers */
+#define HB_DDR_ECC_OPT 0x128
+#define HB_DDR_ECC_U_ERR_ADDR 0x130
+#define HB_DDR_ECC_U_ERR_STAT 0x134
+#define HB_DDR_ECC_U_ERR_DATAL 0x138
+#define HB_DDR_ECC_U_ERR_DATAH 0x13c
+#define HB_DDR_ECC_C_ERR_ADDR 0x140
+#define HB_DDR_ECC_C_ERR_STAT 0x144
+#define HB_DDR_ECC_C_ERR_DATAL 0x148
+#define HB_DDR_ECC_C_ERR_DATAH 0x14c
+#define HB_DDR_ECC_INT_STATUS 0x180
+#define HB_DDR_ECC_INT_ACK 0x184
+#define HB_DDR_ECC_U_ERR_ID 0x424
+#define HB_DDR_ECC_C_ERR_ID 0x428
+
+#define HB_DDR_ECC_INT_STAT_CE 0x8
+#define HB_DDR_ECC_INT_STAT_DOUBLE_CE 0x10
+#define HB_DDR_ECC_INT_STAT_UE 0x20
+#define HB_DDR_ECC_INT_STAT_DOUBLE_UE 0x40
+
+struct hb_mc_drvdata {
+ void __iomem *mc_vbase;
+};
+
+static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
+{
+ struct mem_ctl_info *mci = dev_id;
+ struct hb_mc_drvdata *drvdata = mci->pvt_info;
+ u32 status, err_addr;
+
+ /* Read the interrupt status register */
+ status = readl(drvdata->mc_vbase + HB_DDR_ECC_INT_STATUS);
+
+ if (status & HB_DDR_ECC_INT_STAT_UE) {
+ err_addr = readl(drvdata->mc_vbase + HB_DDR_ECC_U_ERR_ADDR);
+ edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
+ err_addr >> PAGE_SHIFT,
+ err_addr & ~PAGE_MASK, 0,
+ 0, 0, -1,
+ mci->ctl_name, "", NULL);
+ }
+ if (status & HB_DDR_ECC_INT_STAT_CE) {
+ u32 syndrome = readl(drvdata->mc_vbase + HB_DDR_ECC_C_ERR_STAT);
+ syndrome = (syndrome >> 8) & 0xff;
+ err_addr = readl(drvdata->mc_vbase + HB_DDR_ECC_C_ERR_ADDR);
+ edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
+ err_addr >> PAGE_SHIFT,
+ err_addr & ~PAGE_MASK, syndrome,
+ 0, 0, -1,
+ mci->ctl_name, "", NULL);
+ }
+
+ /* clear the error, clears the interrupt */
+ writel(status, drvdata->mc_vbase + HB_DDR_ECC_INT_ACK);
+ return IRQ_HANDLED;
+}
+
+static ssize_t highbank_mc_inject_ctrl_store(struct mem_ctl_info *mci,
+ const char *data, size_t count)
+{
+ struct hb_mc_drvdata *pdata = mci->pvt_info;
+ u32 reg;
+ u8 synd;
+ if (!isdigit(*data))
+ return 0;
+
+ reg = readl(pdata->mc_vbase + HB_DDR_ECC_OPT) & 0x3;
+ if (!kstrtou8(data, 16, &synd)) {
+ reg |= synd << 16;
+ reg |= 0x100;
+ writel(reg, pdata->mc_vbase + HB_DDR_ECC_OPT);
+ }
+ return count;
+}
+
+static struct mcidev_sysfs_attribute highbank_mc_sysfs_attributes[] = {
+ {
+ .attr = {
+ .name = "inject_ctrl",
+ .mode = (S_IRUGO | S_IWUSR)
+ },
+ .store = highbank_mc_inject_ctrl_store,
+ },
+ {
+ .attr = {.name = NULL} /* End of list */
+ }
+};
+
+static int __devinit highbank_mc_probe(struct platform_device *pdev)
+{
+ struct edac_mc_layer layers[2];
+ struct mem_ctl_info *mci;
+ struct hb_mc_drvdata *drvdata;
+ struct dimm_info *dimm;
+ struct resource *r;
+ u32 control;
+ int irq;
+ int res = 0;
+
+ layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+ layers[0].size = 1;
+ layers[0].is_virt_csrow = true;
+ layers[1].type = EDAC_MC_LAYER_CHANNEL;
+ layers[1].size = 1;
+ layers[1].is_virt_csrow = false;
+ mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+ sizeof(struct hb_mc_drvdata));
+ if (!mci)
+ return -ENOMEM;
+
+ drvdata = mci->pvt_info;
+ mci->dev = &pdev->dev;
+ platform_set_drvdata(pdev, mci);
+
+ if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL))
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "Unable to get mem resource\n");
+ res = -ENODEV;
+ goto err;
+ }
+
+ if (!devm_request_mem_region(&pdev->dev, r->start,
+ resource_size(r), dev_name(&pdev->dev))) {
+ dev_err(&pdev->dev, "Error while requesting mem region\n");
+ res = -EBUSY;
+ goto err;
+ }
+
+ drvdata->mc_vbase = devm_ioremap(&pdev->dev,
+ r->start, resource_size(r));
+ if (!drvdata->mc_vbase) {
+ dev_err(&pdev->dev, "Unable to map regs\n");
+ res = -ENOMEM;
+ goto err;
+ }
+
+ control = readl(drvdata->mc_vbase + HB_DDR_ECC_OPT) & 0x3;
+ if (!control || (control == 0x2)) {
+ dev_err(&pdev->dev, "No ECC present, or ECC disabled\n");
+ res = -ENODEV;
+ goto err;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ res = devm_request_irq(&pdev->dev, irq, highbank_mc_err_handler,
+ 0, dev_name(&pdev->dev), mci);
+ if (res < 0) {
+ dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
+ goto err;
+ }
+
+ mci->mtype_cap = MEM_FLAG_DDR3;
+ mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+ mci->edac_cap = EDAC_FLAG_SECDED;
+ mci->mod_name = dev_name(&pdev->dev);
+ mci->mod_ver = "1";
+ mci->ctl_name = dev_name(&pdev->dev);
+ mci->scrub_mode = SCRUB_SW_SRC;
+ mci->mc_driver_sysfs_attributes = highbank_mc_sysfs_attributes;
+
+ /* Only a single 4GB DIMM is supported */
+ dimm = mci->dimms;
+ dimm->nr_pages = (~0UL >> PAGE_SHIFT) + 1;
+ dimm->grain = 8;
+ dimm->dtype = DEV_X8;
+ dimm->mtype = MEM_DDR3;
+ dimm->edac_mode = EDAC_SECDED;
+
+ res = edac_mc_add_mc(mci);
+ if (res < 0)
+ goto err;
+
+ devres_close_group(&pdev->dev, NULL);
+ return 0;
+err:
+ devres_release_group(&pdev->dev, NULL);
+ edac_mc_free(mci);
+ return res;
+}
+
+static int highbank_mc_remove(struct platform_device *pdev)
+{
+ struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+ edac_mc_del_mc(&pdev->dev);
+ edac_mc_free(mci);
+ return 0;
+}
+
+static const struct of_device_id hb_ddr_ctrl_of_match[] = {
+ { .compatible = "calxeda,hb-ddr-ctrl", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, hb_ddr_ctrl_of_match);
+
+static struct platform_driver highbank_mc_edac_driver = {
+ .probe = highbank_mc_probe,
+ .remove = highbank_mc_remove,
+ .driver = {
+ .name = "hb_mc_edac",
+ .of_match_table = hb_ddr_ctrl_of_match,
+ },
+};
+
+module_platform_driver(highbank_mc_edac_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Calxeda, Inc.");
+MODULE_DESCRIPTION("EDAC Driver for Highbank");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/