[PATCH RFC/RFT] regulator: da903x: Don't read/write toDA9030_INVAL/DA9034_INVAL address

[Axel Lin]

For fixed voltage, DA9030_LDO13 and DA9034_LDO5, the info->vol_reg is
DA9030_INVAL/DA9034_INVAL.
It does not make sense to read/write to DA9030_INVAL/DA9034_INVAL address.

Signed-off-by: Axel Lin <axel.lin@xxxxxxxxx>
---
Because we use [list|map]_voltage_linear for fixed voltage where uV_step is 0,
this patch also needs below patch:
[PATCH RFC 1/2] regulator: core: Allow uV_step to be 0 for linear mapping if fixed voltage

 drivers/regulator/da903x.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index 1005f5f..36c5b92 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -107,6 +107,9 @@ static int da903x_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
 	struct device *da9034_dev = to_da903x_dev(rdev);
 	uint8_t val, mask;
 
+	if (rdev->desc->n_voltages == 1)
+		return -EINVAL;
+
 	val = selector << info->vol_shift;
 	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
 
@@ -120,6 +123,9 @@ static int da903x_get_voltage_sel(struct regulator_dev *rdev)
 	uint8_t val, mask;
 	int ret;
 
+	if (rdev->desc->n_voltages == 1)
+		return 0;
+
 	ret = da903x_read(da9034_dev, info->vol_reg, &val);
 	if (ret)
 		return ret;
-- 
1.7.9.5



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/