[ 46/82] mtd: mxc_nand: move ecc strengh setup before nand_scan_tail

[Greg KH]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>

commit 4a43faf54e9173b6acce37cf7f053fc9515a2cdf upstream.

Since commit 6a918bade9dab40aaef80559bd1169c69e8d69cb, the mxc_nand driver
fails with:

Driver must set ecc.strength when using hardware ECC

This is because nand_scan_tail checks for correct ecc strength
settings, so we must set them up before nand_scan_tail.

Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@xxxxxxxxxxxxxxx>
Signed-off-by: David Woodhouse <David.Woodhouse@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/mtd/nand/mxc_nand.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -1219,12 +1219,6 @@ static int __init mxcnd_probe(struct pla
 	if (nfc_is_v21() && mtd->writesize == 4096)
 		this->ecc.layout = &nandv2_hw_eccoob_4k;
 
-	/* second phase scan */
-	if (nand_scan_tail(mtd)) {
-		err = -ENXIO;
-		goto escan;
-	}
-
 	if (this->ecc.mode == NAND_ECC_HW) {
 		if (nfc_is_v1())
 			this->ecc.strength = 1;
@@ -1232,6 +1226,12 @@ static int __init mxcnd_probe(struct pla
 			this->ecc.strength = (host->eccsize == 4) ? 4 : 8;
 	}
 
+	/* second phase scan */
+	if (nand_scan_tail(mtd)) {
+		err = -ENXIO;
+		goto escan;
+	}
+
 	/* Register the partitions */
 	mtd_device_parse_register(mtd, part_probes, NULL, pdata->parts,
 				  pdata->nr_parts);


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/