[PATCH] watchdog: Quiet down the boot messages

[Don Zickus]

A bunch of bugzillas have complained how noisy the nmi_watchdog is during
boot-up especially with its expected failure cases (like virt and bios
resource contention).

This is my attempt to quiet them down and keep it less confusing for the end
user.  What I did is print the message for cpu0 and save it for future
comparisions.  If future cpus have an identical message as cpu0, then don't
print the redundant info.  However, if a future cpu has a different message,
happily print that loudly.

Before the change, you would see something like:

    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version:                2
    ... bit width:              40
    ... generic registers:      2
    ... value mask:             000000ffffffffff
    ... max period:             000000007fffffff
    ... fixed-purpose events:   3
    ... event mask:             0000000700000003
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node   0, Processors  #1
    NMI watchdog enabled, takes one hw-pmu counter.
     #2
    NMI watchdog enabled, takes one hw-pmu counter.
     #3 Ok.
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 4 CPUs
    Total of 4 processors activated (22607.24 BogoMIPS).

After the change, it is simlified to:

    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version:                2
    ... bit width:              40
    ... generic registers:      2
    ... value mask:             000000ffffffffff
    ... max period:             000000007fffffff
    ... fixed-purpose events:   3
    ... event mask:             0000000700000003
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node   0, Processors  #1 #2 #3 Ok.
    Brought up 4 CPUs

Reported-and-tested-by: Nathan Zimmer <nzimmer@xxxxxxx>
Signed-off-by: Don Zickus <dzickus@xxxxxxxxxx>
---
 kernel/watchdog.c |   20 +++++++++++++++++++-
 1 files changed, 19 insertions(+), 1 deletions(-)

diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index e5e1d85..79ff671 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -377,6 +377,14 @@ static int watchdog_nmi_enable(int cpu)
 	struct perf_event_attr *wd_attr;
 	struct perf_event *event = per_cpu(watchdog_ev, cpu);
 
+	/*
+	 * People like the simple clean cpu node info
+	 * on boot.  Simplify the noise from the watchdog
+	 * by only printing messages that are different than
+	 * what cpu0 displayed
+	 */
+	static unsigned long err0 = 0;
+
 	/* is it already setup and enabled? */
 	if (event && event->state > PERF_EVENT_STATE_OFF)
 		goto out;
@@ -390,11 +398,21 @@ static int watchdog_nmi_enable(int cpu)
 
 	/* Try to register using hardware perf events */
 	event = perf_event_create_kernel_counter(wd_attr, cpu, NULL, watchdog_overflow_callback, NULL);
+
+	/* save cpu0 error for future comparision */
+	if (!cpu)
+		err0 = (IS_ERR(event) ? PTR_ERR(event) : 0);
+
 	if (!IS_ERR(event)) {
-		pr_info("enabled, takes one hw-pmu counter.\n");
+		/* only print for cpu0 or different than cpu0 */
+		if (!cpu || err0)
+			pr_info("enabled, takes one hw-pmu counter.\n");
 		goto out_save;
 	}
 
+	/* skip displaying the same error again */
+	if ((PTR_ERR(event) == err0) && cpu)
+		return PTR_ERR(event);
 
 	/* vary the KERN level based on the returned errno */
 	if (PTR_ERR(event) == -EOPNOTSUPP)
-- 
1.7.7.6

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/