Re: [PATCH v3] printk: Have printk() never buffer its data

[Steven Rostedt]

On Wed, 2012-06-27 at 11:13 -0400, Steven Rostedt wrote:

> I just tested this patch and it boots fine for me.

Of course after sending this, I rebooted to the same kernel and it
locked up :-p

Ends with:

[   47.966454] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[   48.188791] kvm: disabled by bios
[   48.352547] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   48.410944] ALSA hda_auto_parser.c:322 autoconfig: line_outs=4 (0xd/0xf/0x10/0x11/0x0) type:line
[   48.419774] ALSA hda_auto_parser.c:326    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   48.427012] ALSA hda_auto_parser.c:330    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[   48.433848] ALSA hda_auto_parser.c:331    mono: mono_out=0x0
[   48.439523] ALSA hda_auto_parser.c:334    dig-out=0x21/0x0
[   48.445023] ALSA hda_auto_parser.c:335    inputs:[   48.449562] ALSA hda_auto_parser.c:339  Front Mic=0xb[   48.454451] ALSA hda_auto_parser.c:339  Rear Mic=0xe[   48.459258] ALSA hda_auto_parser.c:339  Line=0xc

-- Steve

>  Better still, I put
> in my 'delay' to make sure the output shows up as it is printed, and it
> seems to do so.
> 
> Tested-by: Steven Rostedt <rostedt@xxxxxxxxxxx>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/