[PATCH 1/2] backlight: move register definitions from header tosource

[Kim, Milo]

ROM boundary definitions are no need to be exported because these are used only
in lp855x driver internally.

And few code cosmetic changes

Signed-off-by: Milo(Woogyom) Kim <milo.kim@xxxxxx>
---
 drivers/video/backlight/lp855x_bl.c |    8 ++++++--
 include/linux/lp855x.h              |    6 ------
 2 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index 72a0e0c..3d24314 100644
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c
@@ -17,8 +17,12 @@
 #include <linux/lp855x.h>
 
 /* Registers */
-#define BRIGHTNESS_CTRL		(0x00)
-#define DEVICE_CTRL		(0x01)
+#define BRIGHTNESS_CTRL		0x00
+#define DEVICE_CTRL		0x01
+#define EEPROM_START		0xA0
+#define EEPROM_END		0xA7
+#define EPROM_START		0xA0
+#define EPROM_END		0xAF
 
 #define BUF_SIZE		20
 #define DEFAULT_BL_NAME		"lcd-backlight"
diff --git a/include/linux/lp855x.h b/include/linux/lp855x.h
index 781a490..cc76f1f 100644
--- a/include/linux/lp855x.h
+++ b/include/linux/lp855x.h
@@ -47,12 +47,6 @@
 				(LP8556_I2C_ONLY << BRT_MODE_SHFT))
 #define LP8556_COMB2_CONFIG	(LP8556_COMBINED2 << BRT_MODE_SHFT)
 
-/* ROM area boundary */
-#define EEPROM_START	(0xA0)
-#define EEPROM_END	(0xA7)
-#define EPROM_START	(0xA0)
-#define EPROM_END	(0xAF)
-
 enum lp855x_chip_id {
 	LP8550,
 	LP8551,
-- 
1.7.2.5


Best Regards,
Milo



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/