Re: Fwd: Hid over I2C and ACPI interaction

[Lan Tianyu]

On 2012年07月09日 12:02, Moore, Robert wrote:
> These are already defined in acpica - in the file acrestyp.h
> 
>      ACPI_RESOURCE_FIXED_DMA                 FixedDma;
> 
>      ACPI_RESOURCE_GPIO                      Gpio;
>      ACPI_RESOURCE_I2C_SERIALBUS             I2cSerialBus;
>      ACPI_RESOURCE_SPI_SERIALBUS             SpiSerialBus;
>      ACPI_RESOURCE_UART_SERIALBUS            UartSerialBus;
>      ACPI_RESOURCE_COMMON_SERIALBUS          CommonSerialBus;
> 
Yeah. Thanks for Bob's reminder. We can reuse these macros.

> 
> 
>> -----Original Message-----
>> From: linux-acpi-owner@xxxxxxxxxxxxxxx [mailto:linux-acpi-
>> owner@xxxxxxxxxxxxxxx] On Behalf Of Lan Tianyu
>> Sent: Sunday, July 08, 2012 8:25 PM
>> To: Mika Westerberg
>> Cc: Zhang, Rui; khali@xxxxxxxxxxxx; ben-linux@xxxxxxxxx;
>> w.sang@xxxxxxxxxxxxxx; lenb@xxxxxxxxxx; linux-acpi@xxxxxxxxxxxxxxx; linux-
>> i2c@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; jkosina@xxxxxxx;
>> chatty@xxxxxxx; jj_ding@xxxxxxxxxx; bhelgaas@xxxxxxxxxx; abelay@xxxxxxx
>> Subject: Re: Fwd: Hid over I2C and ACPI interaction
>>
>> On 2012年07月06日 13:52, Mika Westerberg wrote:
>>> On Thu, Jul 05, 2012 at 03:01:57PM +0800, Zhang Rui wrote:
>>>> +Note that although these are ACPI devices, we prefer to use PnP drivers
>>>> for them,
>>>> +this is because:
>>>> +1. all the non-ACPI-predefined Devices are exported as PnP devices as
>>>> well
>>>> +2. PnP bus is a well designed bus. Probing via PnP layer saves a lot of
>>>> work
>>>> +   for the device driver, e.g. getting&   parsing ACPI resources.
>>>
>>> (Nice BKM, thanks for sharing)
>>>
>>> I have few questions about using PnP drivers instead of pure ACPI
>> drivers.
>>>
>>> ACPI 5.0 defined some new resources, for example "Fixed DMA descriptor"
>>> that has information about the request line + channel for the device to
>>> use. Hovewer, PnP drivers pass resources as 'struct resource', which
>>> basically only has start and end - how do you represent all this new
>> stuff
>>> using 'struct resource'?
>>>
>> I think we can add new interface to get acpi specific resources. e.g
>> struct acpi_resource pnp_get_acpi_resource(...). When the pnp acpi devices
>> were initialized, put those acpi specific resources into a new resource
>> list
>> pnpdev->acpi_resources. What pnp_get_acpi_resource does is to get specified
>> type acpi resources and return. We also need to define some acpi resource
>> types.
>>
>> ACPI_RESOURCE_DMA
>> ACPI_RESOURCE_I2C_SERIALBUS
>> ACPI_RESOURCE_SPI_SERIALBUS
>> ACPI_RESOURCE_UART_SERIALBUS
>> ACPI_RESOURCE_COMMON_SERIALBUS
>> ...
>>
>> How about this? welcome to comments.
>>
>>> Or should we use acpi_walk_resources() where 'struct resource' is not
>>> suitable?
>>>
>>
>> --
>> Best Regards
>> Tianyu Lan
>> linux kernel enabling team
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Best Regards
Tianyu Lan
linux kernel enabling team
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/