[PATCH] regulator: tps65910: set input_supply on desc unconditionally
From: Laxman Dewangan
Date: Mon Jul 16 2012 - 09:53:21 EST
Set the supply_name in the regulator descriptor unconditionally
and make this parameter as required parameter in the device
node for successfully registration of the regulator.
Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
---
The changes are based on on discussion on patch
[PATCH 1/3] ARM: dt: tegra: seaboard: add regulators
on which the input supply name should be require in DT case and
unconditionally set on the desc.supply_name.
Although the support was accepted earlier but as per discussion,
it was not so good and hence this is the change.
Becasue no-one is using this device as of now in dt file, it is safe
to change now and provide guidance to the new user of this device.
Documentation/devicetree/bindings/mfd/tps65910.txt | 36 ++++++++++++--------
drivers/regulator/tps65910-regulator.c | 11 +-----
include/linux/mfd/tps65910.h | 2 -
3 files changed, 23 insertions(+), 26 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt
index 2ae1854..019ef5c 100644
--- a/Documentation/devicetree/bindings/mfd/tps65910.txt
+++ b/Documentation/devicetree/bindings/mfd/tps65910.txt
@@ -24,20 +24,12 @@ Required properties:
vaux2, vaux33, vmmc
tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
ldo6, ldo7, ldo8
-
-Optional properties:
-- ti,vmbch-threshold: (tps65911) main battery charged threshold
- comparator. (see VMBCH_VSEL in TPS65910 datasheet)
-- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
- comparator. (see VMBCH_VSEL in TPS65910 datasheet)
-- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
- in TPS6591X datasheet)
-- ti,en-gpio-sleep: enable sleep control for gpios
- There should be 9 entries here, one for each gpio.
- xxx-supply: Input voltage supply regulator.
- Missing of these properties will be assume as there is no supply regulator
- for that input pins and always powered on.
- The valid input supply properties are:
+ These entries are require if regulators are enabled for a device. Missing of these
+ properties can cause the regulator registration fails.
+ If some of input supply is powered through battery or always-on supply then
+ also it is require to have these parameters with proper node handle of always
+ on power supply.
tps65910:
vcc1-supply: VDD1 input.
vcc2-supply: VDD2 input.
@@ -57,6 +49,16 @@ Optional properties:
vcc7-supply: VRTC input.
vccio-supply: VIO input.
+Optional properties:
+- ti,vmbch-threshold: (tps65911) main battery charged threshold
+ comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
+ comparator. (see VMBCH_VSEL in TPS65910 datasheet)
+- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
+ in TPS6591X datasheet)
+- ti,en-gpio-sleep: enable sleep control for gpios
+ There should be 9 entries here, one for each gpio.
+
Regulator Optional properties:
- ti,regulator-ext-sleep-control: enable external sleep
control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
@@ -81,8 +83,14 @@ Example:
ti,en-ck32k-xtal;
ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
- vcc7-supply = <®_parent>;
vcc1-supply = <®_parent>;
+ vcc2-supply = <&some_reg>;
+ vcc3-supply = <...>;
+ vcc4-supply = <...>;
+ vcc5-supply = <...>;
+ vcc6-supply = <...>;
+ vcc7-supply = <...>;
+ vccio-supply = <...>;
regulators {
#address-cells = <1>;
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index d2ba066..793adda 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -1001,9 +1001,6 @@ static struct tps65910_board *tps65910_parse_dt_reg_data(
*tps65910_reg_matches = matches;
for (idx = 0; idx < count; idx++) {
- struct tps_info *info = matches[idx].driver_data;
- char in_supply[32]; /* 32 is max size of property name */
-
if (!matches[idx].init_data || !matches[idx].of_node)
continue;
@@ -1015,12 +1012,6 @@ static struct tps65910_board *tps65910_parse_dt_reg_data(
if (!ret)
pmic_plat_data->regulator_ext_sleep_control[idx] = prop;
- if (info->vin_name) {
- snprintf(in_supply, 32, "%s-supply", info->vin_name);
- if (of_find_property(np, in_supply, 0))
- pmic_plat_data->input_supply[idx] =
- info->vin_name;
- }
}
return pmic_plat_data;
@@ -1123,7 +1114,7 @@ static __devinit int tps65910_probe(struct platform_device *pdev)
pmic->info[i] = info;
pmic->desc[i].name = info->name;
- pmic->desc[i].supply_name = pmic_plat_data->input_supply[i];
+ pmic->desc[i].supply_name = info->vin_name;
pmic->desc[i].id = i;
pmic->desc[i].n_voltages = info->n_voltages;
pmic->desc[i].enable_time = info->enable_time_us;
diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h
index 9cc09c8..9bf8767 100644
--- a/include/linux/mfd/tps65910.h
+++ b/include/linux/mfd/tps65910.h
@@ -799,7 +799,6 @@ struct tps65910_sleep_keepon_data {
/**
* struct tps65910_board
* Board platform data may be used to initialize regulators.
- * @input_supply: Name of input supply regulator.
*/
struct tps65910_board {
@@ -813,7 +812,6 @@ struct tps65910_board {
struct tps65910_sleep_keepon_data *slp_keepon;
bool en_gpio_sleep[TPS6591X_MAX_NUM_GPIO];
unsigned long regulator_ext_sleep_control[TPS65910_NUM_REGS];
- const char *input_supply[TPS65910_NUM_REGS];
struct regulator_init_data *tps65910_pmic_init_data[TPS65910_NUM_REGS];
};
--
1.7.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/