Re: [PATCH 5/7 v6] introduce a new qom device to deal with panickedevent

[Wen Congyang]

At 07/06/2012 07:05 PM, Jan Kiszka Wrote:
> On 2012-07-06 11:41, Wen Congyang wrote:
>> If the target is x86/x86_64, the guest's kernel will write 0x01 to the
>> port KVM_PV_PORT when it is panciked. This patch introduces a new qom
>> device kvm_pv_ioport to listen this I/O port, and deal with panicked
>> event according to panicked_action's value. The possible actions are:
>> 1. emit QEVENT_GUEST_PANICKED only
>> 2. emit QEVENT_GUEST_PANICKED and pause the guest
>> 3. emit QEVENT_GUEST_PANICKED and poweroff the guest
>> 4. emit QEVENT_GUEST_PANICKED and reset the guest
>>
>> I/O ports does not work for some targets(for example: s390). And you
>> can implement another qom device, and include it's code into pv_event.c
>> for such target.
>>
>> Note: if we emit QEVENT_GUEST_PANICKED only, and the management
>> application does not receive this event(the management may not
>> run when the event is emitted), the management won't know the
>> guest is panicked.
>>
>> Signed-off-by: Wen Congyang <wency@xxxxxxxxxxxxxx>
>> ---
>>  hw/kvm/Makefile.objs |    2 +-
>>  hw/kvm/pv_event.c    |   73 +++++++++++++++++++++++++++
>>  hw/kvm/pv_ioport.c   |  133 ++++++++++++++++++++++++++++++++++++++++++++++++++
>>  kvm-stub.c           |    9 +++
>>  kvm.h                |    3 +
>>  vl.c                 |    4 ++
>>  6 files changed, 223 insertions(+), 1 deletions(-)
>>  create mode 100644 hw/kvm/pv_event.c
>>  create mode 100644 hw/kvm/pv_ioport.c
>>
>> diff --git a/hw/kvm/Makefile.objs b/hw/kvm/Makefile.objs
>> index 226497a..23e3b30 100644
>> --- a/hw/kvm/Makefile.objs
>> +++ b/hw/kvm/Makefile.objs
>> @@ -1 +1 @@
>> -obj-$(CONFIG_KVM) += clock.o apic.o i8259.o ioapic.o i8254.o
>> +obj-$(CONFIG_KVM) += clock.o apic.o i8259.o ioapic.o i8254.o pv_event.o
>> diff --git a/hw/kvm/pv_event.c b/hw/kvm/pv_event.c
>> new file mode 100644
>> index 0000000..d7ded37
>> --- /dev/null
>> +++ b/hw/kvm/pv_event.c
>> @@ -0,0 +1,73 @@
>> +/*
>> + * QEMU KVM support, paravirtual event device
>> + *
>> + * Copyright Fujitsu, Corp. 2012
>> + *
>> + * Authors:
>> + *     Wen Congyang <wency@xxxxxxxxxxxxxx>
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
>> + * See the COPYING file in the top-level directory.
>> + *
>> + */
>> +
>> +#include <linux/kvm_para.h>
>> +#include <asm/kvm_para.h>
>> +#include <qobject.h>
>> +#include <qjson.h>
>> +#include <monitor.h>
>> +#include <sysemu.h>
>> +#include <kvm.h>
>> +
>> +/* Possible values for action parameter. */
>> +#define PANICKED_REPORT     1   /* emit QEVENT_GUEST_PANICKED only */
>> +#define PANICKED_PAUSE      2   /* emit QEVENT_GUEST_PANICKED and pause VM */
>> +#define PANICKED_POWEROFF   3   /* emit QEVENT_GUEST_PANICKED and quit VM */
>> +#define PANICKED_RESET      4   /* emit QEVENT_GUEST_PANICKED and reset VM */
>> +
>> +static int panicked_action = PANICKED_REPORT;
> 
> Avoid global variables please when there are device states. This one is
> unneeded anyway (and will generate warnings when build without KVM_PV_PORT).

Hmm, do you mean introduce another qom device to store event action?

Thanks
Wen Congyang

> 
>> +
>> +static void panicked_mon_event(const char *action)
>> +{
>> +    QObject *data;
>> +
>> +    data = qobject_from_jsonf("{ 'action': %s }", action);
>> +    monitor_protocol_event(QEVENT_GUEST_PANICKED, data);
>> +    qobject_decref(data);
>> +}
>> +
>> +static void panicked_perform_action(uint32_t panicked_action)
>> +{
>> +    switch (panicked_action) {
>> +    case PANICKED_REPORT:
>> +        panicked_mon_event("report");
>> +        break;
>> +
>> +    case PANICKED_PAUSE:
>> +        panicked_mon_event("pause");
>> +        vm_stop(RUN_STATE_GUEST_PANICKED);
>> +        break;
>> +
>> +    case PANICKED_POWEROFF:
>> +        panicked_mon_event("poweroff");
>> +        exit(0);
> 
> We have qemu_system_shutdown_request.
> 
>> +        break;
>> +    case PANICKED_RESET:
>> +        panicked_mon_event("reset");
>> +        qemu_system_reset_request();
>> +        break;
>> +    }
>> +}
>> +
>> +#if defined(KVM_PV_PORT)
>> +#include "pv_ioport.c"
>> +
>> +void kvm_pv_event_init(void)
>> +{
>> +    pv_ioport_init(panicked_action);
>> +}
>> +#else
>> +void kvm_pv_event_init(void)
>> +{
>> +}
>> +#endif
> 
> Generally, the split-up of handling and transport layer is a good idea
> to allow other arch to support this interface. However, its current form
> is a bit unfortunate as it does not properly separate the logic of the
> events (so far only panic action) from the transport mechanism (PIO) and
> as it registers the transport as a configurable device, not the event
> handler. Make sure that pv_ioport only deals with registering against
> the right bus and forwarding of the PV gate accesses to the event
> handling layer. Device name and properties should be defined by the
> event layer as well (but then registered by the transport layer).
> 
>> diff --git a/hw/kvm/pv_ioport.c b/hw/kvm/pv_ioport.c
>> new file mode 100644
>> index 0000000..e93d819
>> --- /dev/null
>> +++ b/hw/kvm/pv_ioport.c
>> @@ -0,0 +1,133 @@
>> +/*
>> + * QEMU KVM support, paravirtual I/O port device
>> + *
>> + * Copyright Fujitsu, Corp. 2012
>> + *
>> + * Authors:
>> + *     Wen Congyang <wency@xxxxxxxxxxxxxx>
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
>> + * See the COPYING file in the top-level directory.
>> + *
>> + */
>> +
>> +#include "hw/isa.h"
>> +
>> +typedef struct {
>> +    ISADevice dev;
>> +    MemoryRegion ioport;
>> +    uint32_t panicked_action;
> 
> As explained above, this layer should not know about things like
> "panicked_action".
> 
>> +} PVState;
>> +
>> +static PVState *pv_state;
>> +
>> +static uint64_t pv_io_read(void *opaque, target_phys_addr_t addr, unsigned size)
>> +{
>> +    return 1 << KVM_PV_FEATURE_PANICKED;
>> +}
>> +
>> +static void pv_io_write(void *opaque, target_phys_addr_t addr, uint64_t val,
>> +                        unsigned size)
>> +{
>> +    PVState *s = opaque;
>> +
>> +    if (val == KVM_PV_PANICKED) {
>> +        panicked_perform_action(s->panicked_action);
>> +    }
>> +}
>> +
>> +static const MemoryRegionOps pv_io_ops = {
>> +    .read = pv_io_read,
>> +    .write = pv_io_write,
>> +    .impl = {
>> +        .min_access_size = 4,
>> +        .max_access_size = 4,
>> +    },
>> +};
>> +
>> +static int pv_ioport_initfn(ISADevice *dev)
>> +{
>> +    PVState *s = DO_UPCAST(PVState, dev, dev);
>> +
>> +    memory_region_init_io(&s->ioport, &pv_io_ops, s, "pv_event", 1);
>> +    isa_register_ioport(dev, &s->ioport, KVM_PV_PORT);
>> +
>> +    pv_state = s;
>> +
>> +    return 0;
>> +}
>> +
>> +static const VMStateDescription pv_ioport_vmsd = {
>> +    .name = "pv_ioport",
>> +    .version_id = 1,
>> +    .minimum_version_id = 1,
>> +    .minimum_version_id_old = 1,
>> +    .fields = (VMStateField[]) {
>> +        VMSTATE_UINT32(panicked_action, PVState),
>> +        VMSTATE_END_OF_LIST()
>> +    }
>> +};
> 
> Unneeded as panicked_action is a host-side property, not a
> guest-changeable state. Your device is stateless, thus has no vmstate.
> 
>> +
>> +static Property pv_ioport_properties[] = {
>> +    DEFINE_PROP_UINT32("panicked_action", PVState, panicked_action, PANICKED_REPORT),
>> +    DEFINE_PROP_END_OF_LIST(),
>> +};
>> +
>> +static void pv_ioport_class_init(ObjectClass *klass, void *data)
>> +{
>> +    DeviceClass *dc = DEVICE_CLASS(klass);
>> +    ISADeviceClass *ic = ISA_DEVICE_CLASS(klass);
>> +
>> +    ic->init = pv_ioport_initfn;
>> +    dc->no_user = 1;
>> +    dc->vmsd = &pv_ioport_vmsd;
>> +    dc->props = pv_ioport_properties;
>> +}
>> +
>> +static TypeInfo pv_ioport_info = {
>> +    .name          = "kvm_pv_ioport",
>> +    .parent        = TYPE_ISA_DEVICE,
>> +    .instance_size = sizeof(PVState),
>> +    .class_init    = pv_ioport_class_init,
>> +};
>> +
>> +static void pv_ioport_register_types(void)
>> +{
>> +    type_register_static(&pv_ioport_info);
>> +}
>> +
>> +type_init(pv_ioport_register_types)
>> +
>> +static int is_isa_bus(BusState *bus, void *opaque)
>> +{
>> +    const char *bus_type_name;
>> +    ISABus **isa_bus_p = opaque;
>> +
>> +    bus_type_name = object_class_get_name(bus->obj.class);
>> +    if (!strcmp(bus_type_name, TYPE_ISA_BUS)) {
>> +        *isa_bus_p = ISA_BUS(&bus->obj);
>> +        return -1;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static ISABus *get_isa_bus(void)
>> +{
>> +    ISABus *isa_bus = NULL;
>> +
>> +    qbus_walk_children(sysbus_get_default(), NULL, is_isa_bus, &isa_bus);
>> +
>> +    return isa_bus;
>> +}
> 
> Unneeded if the bus is passed on creation from the pc board setup.
> That's the official way.
> 
>> +
>> +static void pv_ioport_init(uint32_t panicked_action)
>> +{
>> +    ISADevice *dev;
>> +    ISABus *bus;
>> +
>> +    bus = get_isa_bus();
>> +    dev = isa_create(bus, "kvm_pv_ioport");
>> +    qdev_prop_set_uint32(&dev->qdev, "panicked_action", panicked_action);
> 
> Nope, configuration should works via "-global device.property=value".
> You likely want to define a special property that translates action
> names into enum values, see e.g. the lost tick policy.
> 
>> +    qdev_init_nofail(&dev->qdev);
>> +}
>> diff --git a/kvm-stub.c b/kvm-stub.c
>> index ec9a364..a28d078 100644
>> --- a/kvm-stub.c
>> +++ b/kvm-stub.c
>> @@ -151,3 +151,12 @@ int kvm_irqchip_remove_irqfd(KVMState *s, int fd, int virq)
>>  {
>>      return -ENOSYS;
>>  }
>> +
>> +void kvm_pv_event_init(void)
>> +{
>> +}
>> +
>> +int select_panicked_action(const char *p)
>> +{
>> +    return 0;
>> +}
> 
> Both will be unneeded.
> 
>> diff --git a/kvm.h b/kvm.h
>> index 9c7b0ea..1f7c72b 100644
>> --- a/kvm.h
>> +++ b/kvm.h
>> @@ -218,4 +218,7 @@ void kvm_irqchip_release_virq(KVMState *s, int virq);
>>  
>>  int kvm_irqchip_add_irqfd(KVMState *s, int fd, int virq);
>>  int kvm_irqchip_remove_irqfd(KVMState *s, int fd, int virq);
>> +
>> +void kvm_pv_event_init(void);
>> +int select_panicked_action(const char *p);
>>  #endif
>> diff --git a/vl.c b/vl.c
>> index ea5ef1c..f5cd28d 100644
>> --- a/vl.c
>> +++ b/vl.c
>> @@ -3622,6 +3622,10 @@ int main(int argc, char **argv, char **envp)
>>          exit(1);
>>      }
>>  
>> +    if (kvm_enabled()) {
>> +        kvm_pv_event_init();
>> +    }
> 
> Initialization is better located in the setup code of the board that
> supports this device (here the PC). Very similar to kvm clock.
> 
>> +
>>      qdev_machine_creation_done();
>>  
>>      if (rom_load_all() != 0) {
>>
> 
> Jan
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/