[ 091/108] ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases

[Ben Hutchings]

3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Feng Tang <feng.tang@xxxxxxxxx>

commit ae10ccdc3093486f8c2369d227583f9d79f628e5 upstream.

Currently when acpi_skip_timer_override is set, it only cover the
(source_irq == 0 && global_irq == 2) cases. While there is also
platform which need use this option and its global_irq is not 2.
This patch will extend acpi_skip_timer_override to cover all
timer overriding cases as long as the source irq is 0.

This is the first part of a fix to kernel bug bugzilla 40002:
	"IRQ 0 assigned to VGA"
https://bugzilla.kernel.org/show_bug.cgi?id=40002

Reported-and-tested-by: Szymon Kowalczyk <fazerxlo@xxxxx>
Signed-off-by: Feng Tang <feng.tang@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
 arch/x86/kernel/acpi/boot.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 8afb693..e7c698e 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -422,12 +422,14 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
 		return 0;
 	}
 
-	if (intsrc->source_irq == 0 && intsrc->global_irq == 2) {
+	if (intsrc->source_irq == 0) {
 		if (acpi_skip_timer_override) {
-			printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+			printk(PREFIX "BIOS IRQ0 override ignored.\n");
 			return 0;
 		}
-		if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
+
+		if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity
+			&& (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
 			intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
 			printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
 		}
@@ -1334,7 +1336,7 @@ static int __init dmi_disable_acpi(const struct dmi_system_id *d)
 }
 
 /*
- * Force ignoring BIOS IRQ0 pin2 override
+ * Force ignoring BIOS IRQ0 override
  */
 static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
 {
@@ -1344,7 +1346,7 @@ static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
 	 */
 	if (!acpi_skip_timer_override) {
 		WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
-		pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+		pr_notice("%s detected: Ignoring BIOS IRQ0 override\n",
 			d->ident);
 		acpi_skip_timer_override = 1;
 	}
@@ -1438,7 +1440,7 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
 	 * is enabled.  This input is incorrectly designated the
 	 * ISA IRQ 0 via an interrupt source override even though
 	 * it is wired to the output of the master 8259A and INTIN0
-	 * is not connected at all.  Force ignoring BIOS IRQ0 pin2
+	 * is not connected at all.  Force ignoring BIOS IRQ0
 	 * override in that cases.
 	 */
 	{


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/