[GIT PULL v2] Blackfin changes for 3.6-rc1

[Bob Liu]

Hi linus,

This is the new pull request about blackfin changes for 3.6-rc1.
I've rebased my tree to 3.5.

The big changes are adding PM and HDMI support for bf60x, other patches are various
bug fix and code cleanup.

Thanks,
-Bob

The following changes since commit 28a33cbc24e4256c143dce96c7d93bf423229f92:

  Linux 3.5 (2012-07-21 13:58:29 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin.git for-linus

for you to fetch changes up to 719154c6d1c1a3a404f4ff570c4b36bb2ef868ca:

  bf60x: fix build warning (2012-07-24 13:39:53 +0800)

----------------------------------------------------------------
Bob Liu (7):
      bfin: reorg clock init steps for bf609
      blackfin: Kconfig: fix ROM range for bf60x
      blackfin: mach-common: ints-priority add irq_set_wake
      blackfin: bf609-ezkit: add probe_type for norflash
      blackfin: fix musb macro name
      blackfin: cplb-nompu: fix ROM cplb size for bf609-ezkit
      bf60x: fix build warning

Scott Jiang (10):
      bf609: change ad7877 cs and irq pin
      bfin: add 32M, 16M and 8M uncached DMA region options
      v4l2: add adv7842 video decoder driver
      bf609: add ssm2602 support on bf609 platform
      bf609: add CVBS and S-Video support for adv7842
      bf609: add HDMI support for adv7842
      bf609: convert vs6624 blank_clocks to black_pixels
      bf561: add capabilities in adv7183_inputs
      bf609: reuse bf5xx-i2s-pcm.c as i2s pcm driver
      bf609: add adv7511 display support

Sonic Zhang (16):
      blackfin: Call sg_for_each to pass through the whole sg list.
      bf609: crypto: Add blackfin crypto crc driver platform data.
      bf60x: Enable Blackfin CRC crypto driver by default.
      bf60x: bfin_crc: move structure bfin_crc out of head file.
      bf609: bfin_crc: Remove unused CRC TX DMA platform resources.
      bfin: pm: add deepsleep for bf60x
      bf60x: Add wake up latency bench for deep sleep mode.
      i2c: i2c-bfin-twi: Always access 16 bit MMR by bfin 16 bit access Macro.
      bf60x: sec: Clean up interrupt initialization code for SEC.
      bf60x: sec: Enable sec interrupt source priority configuration.
      bf60x: update bf60x anomaly list.
      bf60x: add default anomaly setting.
      bf60x: update anomaly id in serial and twi driver headers.
      bf60x: Add double fault, hardware error and NMI SEC handler
      bf60x: cpufreq: fix anomaly 05000273
      blackfin: twi: read twi mmr via bfin_read macro

Steven Miao (14):
      pm: dpmc macro typo fix
      bfin-dma: only use MDMA3 on bf609
      irq: set cgu event handle to fasteoi handle
      cpufreq: change debug message level to show clock change error
      cache: enable L2 sram icache in menuconfig
      bfin: simple_timer: add READ_COUNTER ioctl and add NOIRQ timer mode
      bf60x: pm: add smc nor flash syscore ops
      bf60x: pm: pass wakeup param
      gpiokeys: add gpio keyboard platform device
      bf60x: pm: add pint suspend and resume support
      bfin: pint: add pint suspend and resume
      cleanup: sec and linkport only built on bf60x
      dpm: deepsleep: reserve stack
      PM: add BF60x flash suspend and resume support

Vivi Li (1):
      bf60x: vs6624 pin update

 arch/blackfin/Kconfig                              |   16 +-
 arch/blackfin/configs/BF609-EZKIT_defconfig        |    2 +
 arch/blackfin/include/asm/bfin-global.h            |    8 +-
 arch/blackfin/include/asm/bfin_crc.h               |   14 -
 arch/blackfin/include/asm/bfin_serial.h            |    2 +-
 arch/blackfin/include/asm/bfin_simple_timer.h      |    6 +
 arch/blackfin/include/asm/bfin_twi.h               |   10 +-
 arch/blackfin/include/asm/context.S                |    9 +
 arch/blackfin/include/asm/dpmc.h                   |    2 +-
 arch/blackfin/include/asm/gpio.h                   |    2 +
 arch/blackfin/include/asm/irq.h                    |   10 +
 arch/blackfin/include/asm/mem_init.h               |  212 +++++++++++++
 arch/blackfin/include/asm/traps.h                  |    2 +
 arch/blackfin/kernel/bfin_dma.c                    |    4 +-
 arch/blackfin/kernel/cplb-nompu/cplbinit.c         |    8 +
 arch/blackfin/kernel/dma-mapping.c                 |   10 +-
 arch/blackfin/mach-bf527/boards/ezkit.c            |    4 +-
 arch/blackfin/mach-bf548/boards/ezkit.c            |    4 +-
 arch/blackfin/mach-bf548/include/mach/gpio.h       |    2 +
 arch/blackfin/mach-bf561/boards/ezkit.c            |    3 +
 arch/blackfin/mach-bf609/Kconfig                   |    8 +
 arch/blackfin/mach-bf609/Makefile                  |    4 +-
 arch/blackfin/mach-bf609/boards/ezkit.c            |  304 +++++++++++++++++-
 arch/blackfin/mach-bf609/clock.c                   |    3 +-
 arch/blackfin/mach-bf609/dpm.S                     |  157 ++++++++++
 arch/blackfin/mach-bf609/hibernate.S               |   65 ----
 arch/blackfin/mach-bf609/include/mach/anomaly.h    |  141 ++++-----
 .../mach-bf609/include/mach/defBF60x_base.h        |    1 -
 arch/blackfin/mach-bf609/include/mach/gpio.h       |    2 +
 arch/blackfin/mach-bf609/include/mach/irq.h        |    4 +
 arch/blackfin/mach-bf609/include/mach/pm.h         |    9 +-
 arch/blackfin/mach-bf609/ints-priority.c           |  156 +++++++++
 arch/blackfin/mach-bf609/pm.c                      |  130 ++++----
 arch/blackfin/mach-common/clocks-init.c            |  139 +-------
 arch/blackfin/mach-common/cpufreq.c                |    5 +-
 arch/blackfin/mach-common/entry.S                  |    7 -
 arch/blackfin/mach-common/ints-priority.c          |  331 ++++++++++++++------
 arch/blackfin/mach-common/pm.c                     |    8 +
 38 files changed, 1298 insertions(+), 506 deletions(-)
 create mode 100644 arch/blackfin/mach-bf609/dpm.S
 delete mode 100644 arch/blackfin/mach-bf609/hibernate.S
 create mode 100644 arch/blackfin/mach-bf609/ints-priority.c

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/