[PATCH] Documentation/kvm : Add documentation on Hypercalls

[Raghavendra K T]

From: Raghavendra K T <raghavendra.kt@xxxxxxxxxxxxxxxxxx>

Thanks Alex for KVM_HC_FEATURES inputs and Jan for VAPIC_POLL_IRQ,
and Peter (HPA) for suggesting hypercall ABI addition.

Signed-off-by: Raghavendra K T <raghavendra.kt@xxxxxxxxxxxxxxxxxx>
---
Please have a closer look at Hypercall ABI newly added

Changes since last post:
 - Added hypercall ABI (Peter)
 - made KVM_HC_VAPIC_POLL_IRQ active explicitly (Randy)

TODO: We need to add history details of each hypercall as suggested by HPA,
which I could not trace easily. Hope it is easy for hypercall authors

 Documentation/virtual/hypercalls.txt |   71 ++++++++++++++++++++++++++++++++++
 1 files changed, 71 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/virtual/hypercalls.txt

diff --git a/Documentation/virtual/hypercalls.txt b/Documentation/virtual/hypercalls.txt
new file mode 100644
index 0000000..caffc08
--- /dev/null
+++ b/Documentation/virtual/hypercalls.txt
@@ -0,0 +1,71 @@
+Hypercall ABI:
+=============
+A brief look at calling conventions of X86, S390 and PPC
+X86:
+ KVM Hypercalls have a three-byte sequence of either the vmrun or the vmmrun
+ instruction. The hypervisor can replace it with instructions that are
+ guaranteed to be supported.
+
+ Up to four arguments may be passed in rbx, rcx, rdx, and rsi respectively.
+ The hypercall number should be placed in rax and the return value will be
+ placed in rax.  No other registers will be clobbered unless explicitly stated
+ by the particular hypercall.
+
+S390:
+  R2-R7 are used for parameters 1-6. In addition, R1 is used for hypercall
+  number. The return value is written to R2.
+
+  S390 uses diagnose instruction as hypercall (0x500) along with hypercall
+  number in R1.
+
+ PoewerPC:
+  It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers.
+  Return value is placed in R3.
+
+  KVM hypercalls uses 4 byte opcode, that are patched with 'hypercall-instructions'
+  property inside the device tree's /hypervisor node.
+  For more information refer to Documentation/virtual/kvm/ppc-pv.txt
+
+KVM Hypercalls Documentation
+===========================
+The template for each hypercall is:
+1. Hypercall name, value.
+2. Architecture(s)
+3. Status (deprecated, obsolete, active)
+4. Purpose
+
+1. KVM_HC_VAPIC_POLL_IRQ
+------------------------
+Value: 1
+Architecture: x86
+Status: active
+Purpose: Trigger guest exit so that the host can check for pending
+interrupts on reentry.
+
+2. KVM_HC_MMU_OP
+------------------------
+Value: 2
+Architecture: x86
+Status: deprecated.
+Purpose: Support MMU operations such as writing to PTE,
+flushing TLB, release PT.
+
+3. KVM_HC_FEATURES
+------------------------
+Value: 3
+Architecture: PPC
+Status: active
+Purpose: Expose hypercall availability to the guest. On x86 platforms, cpuid
+used to enumerate which hypercalls are available. On PPC, either device tree
+based lookup ( which is also what EPAPR dictates) OR KVM specific enumeration
+mechanism (which is this hypercall) can be used.
+
+4. KVM_HC_PPC_MAP_MAGIC_PAGE
+------------------------
+Value: 4
+Architecture: PPC
+Status: active
+Purpose: To enable communication between the hypervisor and guest there is a
+shared page that contains parts of supervisor visible register state.
+The guest can map this shared page to access its supervisor register through
+memory using this hypercall.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/