Emulating level IRQs (was: Re: [PATCH] Input: eeti_ts: Mark as CONFIG_BROKEN)

[Daniel Mack]

On 23.07.2012 18:51, Dmitry Torokhov wrote:
> On Thu, Jul 19, 2012 at 05:36:12PM +0200, Daniel Mack wrote:

>> Ok, finally I found some time. In general, the patch works fine. The
>> only detail I had to amend was the irqflags, which were changed from
>> IRQF_TRIGGER_RISING/IRQF_TRIGGER_FALLING to
>> IRQF_TRIGGER_HIGH/IRQF_TRIGGER_LOW, which doesn't work as the PXA can't
>> deal with level-based IRQs. Changing this back to RISING/FALLING makes
>> the driver work again.
> 
> Hmm, but that would mean we need to restore reading the data in open()
> to make sure we re-arm IRQ in case somebody touched the screen before it
> was opened by userspace...

I had another look at this and don't really know what to do here. We
definitely need level interrupts for this device as the interrupt line's
level is the only that tells us when we can stop reading from the
device. So it's not just the start condition that bites us here.

I copied some people that might help find a solution.

To summarize the problem: The EETI touchscreen is a device that asserts
a GPIO line when it has events to deliver and waits for I2C commands to
empty its buffers. When there are no more buffered events, it will
de-assert the line.

This device is connected to a PXA GPIO that is only able to deliver edge
IRQs, and the old implemenation was to wait for an interrupt and then
read data as long as the IRQ's corresponding GPIO was asserted. However,
expecting that an IRQ is mappable to a GPIO is not something we should
do, so the only clean solution is to teach the PXA GPIO controller level
IRQs.

So it boils down to the question: Is there any easy and generic way to
emulate level irq on chips that don't support that natively?


Daniel





--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/