booting 3.5 kernel with dtb on pandaboard fails
From: Belisko Marek
Date: Tue Jul 24 2012 - 15:16:57 EST
Hi,
using barebox to boot 3.5 kernel with device tree for pandaboard (A2)
stuck after some seconds. Any ideas?
Log:
bootm -o /boot/omap4-panda.dtb /boot/uImage
Image Name: Linux-3.5.0-01676-g84de33d-dirty
OS: Linux
Architecture: ARM
Type: Kernel Image
Compression: uncompressed
Data Size: 3668008 Bytes = 3.5 MB
Load Address: 80008000
Entry Point: 80008000
booting Linux kernel with devicetree
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Linux version 3.5.0-01676-g84de33d-dirty
(open-nandra@nandra-host) (gcc version 4.6.3 20120201 (prerelease)
(crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) )
#2
[ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine: Generic OMAP4 (Flattened Device Tree), model:
TI OMAP4 PandaBoard
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4430 ES2.1
[ 0.000000] powerdomain: waited too long for powerdomain dss_pwrdm
to complete transition
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c14c2000 s11520 r8192 d13056 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 259840
[ 0.000000] Kernel command line: console=ttyO2,115200 rootwait
root=/dev/mmcblkp02
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 759MB 264MB = 1023MB total
[ 0.000000] Memory: 976248k/976248k available, 72328k reserved,
270336K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0667588 (6526 kB)
[ 0.000000] .init : 0xc0668000 - 0xc06b5d00 ( 312 kB)
[ 0.000000] .data : 0xc06b6000 - 0xc0750f68 ( 620 kB)
[ 0.000000] .bss : 0xc0750f8c - 0xc0cab048 (5481 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:474
[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for
dpll_mpu_m2_ck.
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] omap_hwmod: sys_32k_ck: missing clockdomain for sys_32k_ck.
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns,
wraps every 131071999ms
[ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat,
Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.001037] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344)
[ 0.062316] pid_max: default: 32768 minimum: 301
[ 0.063079] Security Framework initialized
[ 0.063354] Mount-cache hash table entries: 512
[ 0.073425] CPU: Testing write buffer coherency: ok
[ 0.074432] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.074798] Setting up static identity map for 0x80496a30 - 0x80496aa0
[ 0.074890] L310 cache controller enabled
[ 0.074890] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL
0x7e470000, Cache size: 1048576 B
[ 0.078247] CPU1: Booted secondary processor
[ 0.105957] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.106048] CPU1: Unknown IPI message 0x1
[ 0.106262] Brought up 2 CPUs
[ 0.106292] SMP: Total of 2 processors activated (2388.48 BogoMIPS).
[ 0.119140] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[ 0.123931] omap_hwmod: sl2if: cannot be enabled for reset (3)
[ 0.128082] omap_hwmod: mcpdm: cannot be enabled for reset (3)
[ 0.128265] omap_hwmod: cm_core_aon: cannot be enabled for reset (3)
[ 0.128265] omap_hwmod: cm_core: cannot be enabled for reset (3)
[ 0.134094] dummy:
[ 0.135650] NET: Registered protocol family 16
[ 0.135925] GPMC revision 6.0
[ 0.136047] gpmc: irq-52 could not claim: err -22
[ 0.216217] OMAP GPIO hardware version 0.1
[ 0.231933] platform 40132000.mcpdm: omap_device_alloc(): resources
already allocated 3
[ 0.232604] platform 4012e000.dmic: omap_device_alloc(): resources
already allocated 3
[ 0.233856] No ATAGs?
[ 0.233886] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1
watchpoint registers.
[ 0.233917] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.244598] OMAP DMA hardware revision 0.0
[ 0.286682] bio: create slab <bio-0> at 0
[ 0.294891] SCSI subsystem initialized
[ 0.296508] usbcore: registered new interface driver usbfs
[ 0.296844] usbcore: registered new interface driver hub
[ 0.297302] usbcore: registered new device driver usb
[ 0.309417] omap_i2c i2c.15: bus -1 rev2.4.0 at 400 kHz
[ 0.312499] Skipping twl internal clock init and using bootloader
value (unknown osc rate)
[ 0.313690] twl 0-0048: PIH (irq 39) chaining IRQs 352..372
[ 0.316345] VAUX1_6030: 1000 <--> 3000 mV at 1800 mV
[ 0.319122] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV
[ 0.320922] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV
[ 0.322601] VMMC: 1200 <--> 3000 mV at 3000 mV
[ 0.324340] VPP: 1800 <--> 2500 mV at 1900 mV
[ 0.326171] VUSIM: 1200 <--> 2900 mV at 1800 mV
[ 0.327789] VDAC: 1800 mV
[ 0.329223] VANA: 2100 mV
[ 0.330596] VCXIO: 1800 mV
[ 0.332031] VUSB: 3300 mV
[ 0.333740] V1V8: 1800 mV
[ 0.335174] V2V1: 2100 mV
[ 0.348297] omap_i2c i2c.16: bus -1 rev2.4.0 at 400 kHz
[ 0.363891] omap_i2c i2c.17: bus -1 rev2.4.0 at 100 kHz
[ 0.379516] omap_i2c i2c.18: bus -1 rev2.4.0 at 400 kHz
[ 0.385070] Switching to clocksource 32k_counter
[ 0.475799] NET: Registered protocol family 2
[ 0.476531] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.478363] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.481964] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[ 0.507110] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.507263] TCP: reno registered
[ 0.507324] UDP hash table entries: 512 (order: 3, 40960 bytes)
[ 0.507751] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[ 0.509033] NET: Registered protocol family 1
[ 0.510284] RPC: Registered named UNIX socket transport module.
[ 0.510284] RPC: Registered udp transport module.
[ 0.510314] RPC: Registered tcp transport module.
[ 0.510314] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.511169] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.702636] bounce pool size: 64 pages
[ 0.703430] VFS: Disk quotas dquot_6.5.2
[ 0.703735] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.706115] NFS: Registering the id_resolver key type
[ 0.706512] Key type id_resolver registered
[ 0.707366] jffs2: version 2.2. (NAND) (SUMMARY) ï 2001-2006 Red Hat, Inc.
[ 0.708312] msgmni has been set to 1378
[ 0.710815] io scheduler noop registered
[ 0.710815] io scheduler deadline registered
[ 0.710998] io scheduler cfq registered (default)
[ 0.712646] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.717651] serial.11: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 0.719024] serial.12: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 0.720001] serial.13: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 1.452575] console [ttyO2] enabled
[ 1.457336] serial.14: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 1.488525] brd: module loaded
[ 1.505157] loop: module loaded
[ 1.512878] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.520233] OneNAND driver initializing
[ 1.533416] usbcore: registered new interface driver asix
[ 1.539489] usbcore: registered new interface driver cdc_ether
[ 1.546020] usbcore: registered new interface driver smsc95xx
[ 1.552429] usbcore: registered new interface driver net1080
[ 1.558746] usbcore: registered new interface driver cdc_subset
[ 1.565338] usbcore: registered new interface driver zaurus
[ 1.571563] usbcore: registered new interface driver cdc_ncm
[ 1.578948] usbcore: registered new interface driver cdc_wdm
[ 1.584930] Initializing USB Mass Storage driver...
[ 1.590454] usbcore: registered new interface driver usb-storage
[ 1.596801] USB Mass Storage support registered.
[ 1.602416] usbcore: registered new interface driver libusual
[ 1.608886] usbcore: registered new interface driver usbtest
[ 1.615905] mousedev: PS/2 mouse device common for all mice
[ 1.626098] twl_rtc rtc.28: Enabling TWL-RTC
[ 1.634246] twl_rtc rtc.28: rtc core: registered rtc.28 as rtc0
[ 1.641326] i2c /dev entries driver
[ 1.647949] Driver for 1-wire Dallas network protocol.
[ 1.655761] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[ 1.665679] omap_hsmmc mmc.23: Failed to get debounce clk
[ 1.721710] omap_hsmmc mmc.24: Failed to get debounce clk
[ 1.777648] usbcore: registered new interface driver usbhid
[ 1.783508] usbhid: USB HID core driver
[ 1.787567] oprofile: hardware counters not available
[ 1.792907] oprofile: using timer interrupt.
[ 1.798065] TCP: cubic registered
[ 1.801574] Initializing XFRM netlink socket
[ 1.806152] NET: Registered protocol family 17
[ 1.810913] NET: Registered protocol family 15
[ 1.815948] Key type dns_resolver registered
[ 1.820526] VFP support v0.3: implementor 41 architecture 3 part 30
variant 9 rev 1
[ 1.828918] Power Management for TI OMAP4.
[ 1.833374] ThumbEE CPU extension supported.
[ 1.839508] mmc0: host does not support reading read-only switch.
assuming write-enable.
[ 1.850280] mmc0: new high speed SD card at address bf62
[ 1.858154] mmcblk0: mmc0:bf62 SD02G 1.83 GiB
[ 1.862365] clock: disabling unused clocks to save power
[ 1.869964] V2V1: disabling
Any ideas?
Regards,
mbe
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/