Re: [PATCH v3] mmc: dw_mmc: Disable low power mode if SDIO interruptsare used

[Will Newton]

On Tue, Jul 24, 2012 at 5:59 PM, Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
> The documentation for the dw_mmc part says that the low power
> mode should normally only be set for MMC and SD memory and should
> be turned off for SDIO cards that need interrupts detected.
>
> The best place I could find to do this is when the SDIO interrupt
> was first enabled.  I rely on the fact that dw_mci_setup_bus()
> will be called when it's time to reenable.
>
> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
> ---
> Changes in v3:
> - Commenting fixes requested by Seungwoon Jeon and Jaehoon Chung.
> - Only pass 'slot' to the low power disable function since whole mmc
>   structure wasn't needed.
>
> Changes in v2:
> - Commenting fixes requested by Grant Grundler.
> - Be extra certain that we don't re-turn on the low power mode in
>   CLKENA in dw_mci_setup_bus() if SDIO interrupts are enabled.
>   There are no known instances of this happening but it's good to be safe.
>
>
>  drivers/mmc/host/dw_mmc.c |   41 ++++++++++++++++++++++++++++++++++++++---
>  1 files changed, 38 insertions(+), 3 deletions(-)

Acked-by: Will Newton <will.newton@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/