Re: [PATCH 1/3] drivers/misc: Add realtek card reader core driver

[Aaron Lu]

Hi Wei,

We do not use MMC_CAP_MAX_CURRENT_* anymore, for your host, I would
sugget you do something like this:

static void realtek_init(struct realtek_sdmmc *host)
{
	struct mmc_host *mmc = host->mmc;
	... ...
	/*
	 * since you have set MMC_CAP_MAX_CURRENT_800 in your
	 * original code, I assume your host can provide more than
	 * 800mA, and you've set the 1.8v support bit in your original
	 * code for the host, so I also set the max_current_180 to 800mA.
	 */
	mmc->max_current_330 = 800;
	mmc->max_current_180 = 800;
	... ...
}

Does this look right to you?

Thanks,
Aaron

On Wed, Jul 25, 2012 at 10:04:15AM +0200, Borislav Petkov wrote:
> On Wed, Jul 25, 2012 at 10:28:39AM +0800, wwang wrote:
> > ä 2012å07æ24æ 22:07, Borislav Petkov åé:
> > >Kernel is Linus' from yesterday: v3.5-709-ga6be1fcbc57f and config
> > >is attached.
> > 
> > The compilation process is still OK with your config.
> 
> Yes, but not with the kernel I'm using. If you'd tried that exact kernel
> you would've seen that because...
> 
> > 
> > MMC_CAP_MAX_CURRENT_200 is usually defined in
> > include/linux/mmc/host.h, can you help to check it in your kernel
> > code?
> 
> ... MMC_CAP_MAX_CURRENT_* got removed by the patch at the end of this
> note and which went in through the MMC tree in this merge window:
> 
> commit a6be1fcbc57f95bb47ef3c8e4ee3d83731b8f21e
> Merge: 5b160bd42694 30b87c60e9cb
> Author: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
> Date:   Sun Jul 22 16:36:08 2012 -0700
> 
>     Merge tag 'mmc-merge-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
> ...
> 
> I'm adding some more people to Cc so that you can figure it all out
> among yourselves how to deal with the situation :)
> 
> Thanks.
> 
> ---
> 
> commit 55c4665ea0a42fd6427826bfce96eb4b0389262a
> Author: Aaron Lu <aaron.lu@xxxxxxx>
> Date:   Wed Jul 4 13:31:48 2012 +0800
> 
>     mmc: sd: Fix sd current limit setting
>     
>     Host has different current capabilities at different voltages, we need
>     to record these settings seperately. The defined voltages are 1.8/3.0/3.3.
>     For other voltages, we do not touch current limit setting.
>     
>     Before we set the current limit for the sd card, find out the host's
>     operating voltage first and then find out the current capabilities of
>     the host at that voltage to set the current limit.
>     
>     Signed-off-by: Aaron Lu <aaron.lu@xxxxxxx>
>     Reviewed-by: Philip Rakity <prakity@xxxxxxxxxxx>
>     Signed-off-by: Chris Ball <cjb@xxxxxxxxxx>
> 
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 65c64ee578a7..f578a71d82a6 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -189,6 +189,9 @@ struct mmc_host {
>         u32                     ocr_avail_sd;   /* SD-specific OCR */
>         u32                     ocr_avail_mmc;  /* MMC-specific OCR */
>         struct notifier_block   pm_notify;
> +       u32                     max_current_330;
> +       u32                     max_current_300;
> +       u32                     max_current_180;
>  
>  #define MMC_VDD_165_195                0x00000080      /* VDD voltage 1.65 - 1.95 */
>  #define MMC_VDD_20_21          0x00000100      /* VDD voltage 2.0 ~ 2.1 */
> @@ -232,16 +235,9 @@ struct mmc_host {
>  #define MMC_CAP_UHS_SDR50      (1 << 17)       /* Host supports UHS SDR50 mode */
>  #define MMC_CAP_UHS_SDR104     (1 << 18)       /* Host supports UHS SDR104 mode */
>  #define MMC_CAP_UHS_DDR50      (1 << 19)       /* Host supports UHS DDR50 mode */
> -#define MMC_CAP_SET_XPC_330    (1 << 20)       /* Host supports >150mA current at 3.3V */
> -#define MMC_CAP_SET_XPC_300    (1 << 21)       /* Host supports >150mA current at 3.0V */
> -#define MMC_CAP_SET_XPC_180    (1 << 22)       /* Host supports >150mA current at 1.8V */
>  #define MMC_CAP_DRIVER_TYPE_A  (1 << 23)       /* Host supports Driver Type A */
>  #define MMC_CAP_DRIVER_TYPE_C  (1 << 24)       /* Host supports Driver Type C */
>  #define MMC_CAP_DRIVER_TYPE_D  (1 << 25)       /* Host supports Driver Type D */
> -#define MMC_CAP_MAX_CURRENT_200        (1 << 26)       /* Host max current limit is 200mA */
> -#define MMC_CAP_MAX_CURRENT_400        (1 << 27)       /* Host max current limit is 400mA */
> -#define MMC_CAP_MAX_CURRENT_600        (1 << 28)       /* Host max current limit is 600mA */
> -#define MMC_CAP_MAX_CURRENT_800        (1 << 29)       /* Host max current limit is 800mA */
>  #define MMC_CAP_CMD23          (1 << 30)       /* CMD23 supported. */
>  #define MMC_CAP_HW_RESET       (1 << 31)       /* Hardware reset */
> 
> -- 
> Regards/Gruss,
>     Boris.
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/