[PATCH 1/2] lis3: add generic DT matching code

From: Daniel Mack
Date: Wed Jul 25 2012 - 08:02:50 EST


This patch adds logic to parse lis3 properties from a device tree node
and store them in a freshly allocated lis3lv02d_platform_data.

Note that the actual match tables are left out here. This part should
happen in the drivers that bind to the individual busses (SPI/I2C/PCI).

Signed-off-by: Daniel Mack <zonque@xxxxxxxxx>
---
drivers/misc/lis3lv02d/lis3lv02d.c | 145 ++++++++++++++++++++++++++++++++++++
drivers/misc/lis3lv02d/lis3lv02d.h | 4 +
2 files changed, 149 insertions(+)

diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
index a981e2a..cfa4689 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -39,6 +39,7 @@
#include <linux/miscdevice.h>
#include <linux/pm_runtime.h>
#include <linux/atomic.h>
+#include <linux/of_device.h>
#include "lis3lv02d.h"

#define DRIVER_NAME "lis3lv02d"
@@ -912,6 +913,146 @@ static void lis3lv02d_8b_configure(struct lis3lv02d *lis3,
}
}

+#ifdef CONFIG_OF
+static int lis3lv02d_init_dt(struct lis3lv02d *lis3)
+{
+ struct lis3lv02d_platform_data *pdata;
+ struct device_node *np = lis3->of_node;
+ u32 tmp;
+
+ if (!lis3->of_node)
+ return 0;
+
+ pdata = kzalloc(sizeof(*lis3->pdata), GFP_KERNEL);
+ if (!lis3->pdata)
+ return -ENOMEM;
+
+ if (of_get_property(np, "st,click-single-x", NULL))
+ pdata->click_flags |= LIS3_CLICK_SINGLE_X;
+ if (of_get_property(np, "st,click-double-x", NULL))
+ pdata->click_flags |= LIS3_CLICK_DOUBLE_X;
+
+ if (of_get_property(np, "st,click-single-y", NULL))
+ pdata->click_flags |= LIS3_CLICK_SINGLE_Y;
+ if (of_get_property(np, "st,click-double-y", NULL))
+ pdata->click_flags |= LIS3_CLICK_DOUBLE_Y;
+
+ if (of_get_property(np, "st,click-single-z", NULL))
+ pdata->click_flags |= LIS3_CLICK_SINGLE_Z;
+ if (of_get_property(np, "st,click-double-z", NULL))
+ pdata->click_flags |= LIS3_CLICK_DOUBLE_Z;
+
+ if (!of_property_read_u32(np, "st,click-threshold-x", &tmp))
+ pdata->click_thresh_x = tmp;
+ if (!of_property_read_u32(np, "st,click-threshold-y", &tmp))
+ pdata->click_thresh_y = tmp;
+ if (!of_property_read_u32(np, "st,click-threshold-z", &tmp))
+ pdata->click_thresh_z = tmp;
+
+ if (!of_property_read_u32(np, "st,click-time-limit", &tmp))
+ pdata->click_time_limit = tmp;
+ if (!of_property_read_u32(np, "st,click-latency", &tmp))
+ pdata->click_latency = tmp;
+ if (!of_property_read_u32(np, "st,click-time-limit", &tmp))
+ pdata->click_time_limit = tmp;
+
+ if (of_get_property(np, "st,irq1-disable", NULL))
+ pdata->irq_cfg |= LIS3_IRQ1_DISABLE;
+ if (of_get_property(np, "st,irq1-ff-wu-1", NULL))
+ pdata->irq_cfg |= LIS3_IRQ1_FF_WU_1;
+ if (of_get_property(np, "st,irq1-ff-wu-2", NULL))
+ pdata->irq_cfg |= LIS3_IRQ1_FF_WU_2;
+ if (of_get_property(np, "st,irq1-ff-wu-2", NULL))
+ pdata->irq_cfg |= LIS3_IRQ1_FF_WU_2;
+ if (of_get_property(np, "st,irq1-data-ready", NULL))
+ pdata->irq_cfg |= LIS3_IRQ1_DATA_READY;
+ if (of_get_property(np, "st,irq1-click", NULL))
+ pdata->irq_cfg |= LIS3_IRQ1_CLICK;
+ if (of_get_property(np, "st,irq1-mask", NULL))
+ pdata->irq_cfg |= LIS3_IRQ1_MASK;
+
+ if (of_get_property(np, "st,irq2-disable", NULL))
+ pdata->irq_cfg |= LIS3_IRQ2_DISABLE;
+ if (of_get_property(np, "st,irq2-ff-wu-1", NULL))
+ pdata->irq_cfg |= LIS3_IRQ2_FF_WU_1;
+ if (of_get_property(np, "st,irq2-ff-wu-2", NULL))
+ pdata->irq_cfg |= LIS3_IRQ2_FF_WU_2;
+ if (of_get_property(np, "st,irq2-ff-wu-2", NULL))
+ pdata->irq_cfg |= LIS3_IRQ2_FF_WU_2;
+ if (of_get_property(np, "st,irq2-data-ready", NULL))
+ pdata->irq_cfg |= LIS3_IRQ2_DATA_READY;
+ if (of_get_property(np, "st,irq2-click", NULL))
+ pdata->irq_cfg |= LIS3_IRQ2_CLICK;
+ if (of_get_property(np, "st,irq2-mask", NULL))
+ pdata->irq_cfg |= LIS3_IRQ2_MASK;
+
+ if (of_get_property(np, "st,irq-open-drain", NULL))
+ pdata->irq_cfg |= LIS3_IRQ_OPEN_DRAIN;
+ if (of_get_property(np, "st,irq-active-low", NULL))
+ pdata->irq_cfg |= LIS3_IRQ_ACTIVE_LOW;
+
+ if (!of_property_read_u32(np, "st,duration-1", &tmp))
+ pdata->duration1 = tmp;
+ if (!of_property_read_u32(np, "st,duration-2", &tmp))
+ pdata->duration2 = tmp;
+
+ if (of_get_property(np, "st,wakeup-x-lo", NULL))
+ pdata->wakeup_flags |= LIS3_WAKEUP_X_LO;
+ if (of_get_property(np, "st,wakeup-x-hi", NULL))
+ pdata->wakeup_flags |= LIS3_WAKEUP_X_HI;
+ if (of_get_property(np, "st,wakeup-y-lo", NULL))
+ pdata->wakeup_flags |= LIS3_WAKEUP_Y_LO;
+ if (of_get_property(np, "st,wakeup-y-hi", NULL))
+ pdata->wakeup_flags |= LIS3_WAKEUP_Y_HI;
+ if (of_get_property(np, "st,wakeup-z-lo", NULL))
+ pdata->wakeup_flags |= LIS3_WAKEUP_Z_LO;
+ if (of_get_property(np, "st,wakeup-z-hi", NULL))
+ pdata->wakeup_flags |= LIS3_WAKEUP_Z_HI;
+
+ if (!of_property_read_u32(np, "st,highpass-cutoff-hz", &tmp)) {
+ switch (tmp) {
+ case 1:
+ pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_1HZ;
+ break;
+ case 2:
+ pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_2HZ;
+ break;
+ case 4:
+ pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_4HZ;
+ break;
+ case 8:
+ pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_8HZ;
+ break;
+ }
+ }
+
+ if (of_get_property(np, "st,hipass1-disable", NULL))
+ pdata->hipass_ctrl |= LIS3_HIPASS1_DISABLE;
+ if (of_get_property(np, "st,hipass2-disable", NULL))
+ pdata->hipass_ctrl |= LIS3_HIPASS2_DISABLE;
+
+ if (of_get_property(np, "st,axis-x", NULL))
+ pdata->axis_x = tmp;
+ if (of_get_property(np, "st,axis-y", NULL))
+ pdata->axis_y = tmp;
+ if (of_get_property(np, "st,axis-z", NULL))
+ pdata->axis_z = tmp;
+
+ if (of_get_property(np, "st,default-rate", NULL))
+ pdata->default_rate = tmp;
+
+ lis3->pdata = pdata;
+
+ return 0;
+}
+
+#else
+static int lis3lv02d_init_dt(struct lis3lv02d *lis3)
+{
+ return 0;
+}
+#endif
+
/*
* Initialise the accelerometer and the various subsystems.
* Should be rather independent of the bus system.
@@ -922,6 +1063,10 @@ int lis3lv02d_init_device(struct lis3lv02d *lis3)
irq_handler_t thread_fn;
int irq_flags = 0;

+ err = lis3lv02d_init_dt(lis3);
+ if (err < 0)
+ return err;
+
lis3->whoami = lis3lv02d_read_8(lis3, WHO_AM_I);

switch (lis3->whoami) {
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h
index 2b1482a..a296f1d 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.h
+++ b/drivers/misc/lis3lv02d/lis3lv02d.h
@@ -282,6 +282,10 @@ struct lis3lv02d {

struct lis3lv02d_platform_data *pdata; /* for passing board config */
struct mutex mutex; /* Serialize poll and selftest */
+
+#ifdef CONFIG_OF
+ struct device_node *of_node;
+#endif
};

int lis3lv02d_init_device(struct lis3lv02d *lis3);
--
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/