Re: [RFC][PATCH] hwmon: add support for Sensirion C1 sensor

[Guenter Roeck]

Hi Johannes,

On Thu, Jul 26, 2012 at 03:53:12PM +0200, Johannes Winkelmann wrote:
> Hi Guenter,
> 
> Thanks a lot for the feedback; I've incorporated most of it in
> preparation for a v2 of the patch; I have some comments on the points
> I'm not certain about:
> 
[ ... ]
> >> +
> >> +The device communicates with the I2C protocol. All sensors are set to the same
> >> +I2C address 0x70, so an entry with I2C_BOARD_INFO("shtc1", 0x70) can be used
> >> +in the board setup code.
> >> +
> > Please also provide a reference to the other means to instantiate the driver.
> 
> I've checked a couple of documentation files and haven't found what
> else I should add, in fact the other sensor documents I checked didn't
> cover this, except for the one from the sht21 after which I modelled
> the document. Could you give me a pointer where to look?
> 
Just add a reference to Documentation/i2c/instantiating-devices.

Thanks,
Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/