[GPIO] Crashed when not using
From: Poddar, Sourav
Date: Mon Jul 30 2012 - 04:43:27 EST
Hi All,
I tried using gpio as an interrupt line for my driver
(drivers/staging/iio/light/tsl2x7x_core.c) for omap5.
The interrupt line number was directly passed to the driver using
device tree. But what I observed
is the following crash..
[ 1.599273] mousedev: PS/2 mouse device common for all mice
[ 1.607513] i2c /dev entries driver
[ 1.613739] Driver for 1-wire Dallas network protocol.
[ 1.622650] usbcore: registered new interface driver usbhid
[ 1.628540] usbhid: USB HID core driver
[ 1.633728] Unhandled fault: imprecise external abort (0x1406) at 0x00000000
[ 1.641113] Internal error: : 1406 [#1] SMP ARM
[ 1.645874] Modules linked in:
[ 1.649078] CPU: 0 Not tainted (3.5.0-02045-g0b474d6-dirty #415)
[ 1.655761] PC is at _set_gpio_triggering+0x44/0x264
[ 1.660980] LR is at gpio_irq_type+0xb8/0x160
[ 1.665527] pc : [<c02dbb68>] lr : [<c02dc2dc>] psr: 60000093
[ 1.665527] sp : dc851df0 ip : c07a8f00 fp : 00000000
[ 1.677581] r10: 00000081 r9 : 00000000 r8 : dc8ffc10
[ 1.683074] r7 : 20000093 r6 : 00000000 r5 : 00000001 r4 : fa05b000
[ 1.689910] r3 : dc8ffc10 r2 : 00000002 r1 : 00000002 r0 : 00000140
[ 1.696746] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM
Segment kernel
[ 1.704528] Control: 10c53c7d Table: 8000406a DAC: 00000017
[ 1.710540] Process swapper/0 (pid: 1, stack limit = 0xdc8502f8)
[ 1.716857] Stack: (0xdc851df0 to 0xdc852000)
[ 1.721405] 1de0: 00000002
c0731280 dc8ffc6c 20000093
[ 1.730010] 1e00: c02dc224 c0731280 dc8d4980 00000000 c07a8e50
00000141 00000002 c00a37b8
[ 1.738586] 1e20: 00002002 c0731280 dc8d4980 00000141 c07312d4
c07312b4 40000013 c00a3d7c
[ 1.747161] 1e40: 00000141 c06728c0 00000000 c0090578 c247f000
c00a2d5c c0412258 00000141
[ 1.755737] 1e60: c0731280 c0537818 dc8d4980 c00a3fe4 c07bf6a0
00002002 c071bed8 c247f000
[ 1.764312] 1e80: dc9df000 00000004 c07bf6a0 dc9df020 c247f3c0
c04ea344 c06728c0 c247f000
[ 1.772888] 1ea0: 00000000 09090578 c07bf6a0 dc9df004 dc9df000
c04ea194 00000091 c071bed8
[ 1.781494] 1ec0: c06f89f4 c03e13c0 c03e1314 dc9df020 c0d1afd8
dc9df054 c07bf60c c03272ac
[ 1.790069] 1ee0: dc9df020 c07bf60c dc9df054 00000000 00000091
c03274c0 c07bf60c dc851f08
[ 1.798645] 1f00: c032742c c0325b10 dc8f26a8 dc9ef790 00000000
c07bf60c c07bcea8 c243d6c0
[ 1.807220] 1f20: 00000000 c0326240 c0672958 c02bce08 c07bf5e4
c07bf60c c03e12a0 00000000
[ 1.815795] 1f40: 00000091 c071bed8 c06f89f4 c0327ab0 c07bf5e4
00000007 c07c8c40 00000000
[ 1.824401] 1f60: 00000091 c03e1738 00000000 dc850000 00000007
c0008648 00000000 c112c9f0
[ 1.832977] 1f80: c06a6d58 c06f89f4 00000001 60000013 c06694c8
00000000 00000006 00000006
[ 1.841552] 1fa0: 60000013 c0700a20 00000007 c07c8c40 c06d020c
00000091 c071bed8 c0700a28
[ 1.850128] 1fc0: 00000000 c06d0380 00000006 00000006 c06d020c
00000000 00000000 c06d028c
[ 1.858703] 1fe0: c001548c 00000013 00000000 00000000 00000000
c001548c 3f3f3f3f 3f3f3f3f
[ 1.867309] [<c02dbb68>] (_set_gpio_triggering+0x44/0x264) from
[<c02dc224>] (gpio_irq_type+0x0/0x160)
[ 1.877075] [<c02dc224>] (gpio_irq_type+0x0/0x160) from [<00002002>] (0x2002)
[ 1.884552] Code: e3120008 11816006 01c66001 e7846000 (e593c0fc)
[ 1.890960] ------------[ cut here ]------------
[ 1.895812] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:113
l3_interrupt_handler+0x184/0x1bc()
[ 1.905029] L3 custom error: MASTER:MPU TARGET:L4 PER2
[ 1.910430] Modules linked in:
[ 1.913635] [<c001bd5c>] (unwind_backtrace+0x0/0xf4) from
[<c00414c4>] (warn_slowpath_common+0x4c/0x64)
[ 1.923492] [<c00414c4>] (warn_slowpath_common+0x4c/0x64) from
[<c0041570>] (warn_slowpath_fmt+0x30/0x40)
[ 1.933563] [<c0041570>] (warn_slowpath_fmt+0x30/0x40) from
[<c0035de4>] (l3_interrupt_handler+0x184/0x1bc)
[ 1.943786] [<c0035de4>] (l3_interrupt_handler+0x184/0x1bc) from
[<c00a28b8>] (handle_irq_event_percpu+0x64/0x24c)
[ 1.954650] [<c00a28b8>] (handle_irq_event_percpu+0x64/0x24c) from
[<c00a2adc>] (handle_irq_event+0x3c/0x5c)
[ 1.964965] [<c00a2adc>] (handle_irq_event+0x3c/0x5c) from
[<c00a56a8>] (handle_fasteoi_irq+0x98/0x13c)
[ 1.974822] [<c00a56a8>] (handle_fasteoi_irq+0x98/0x13c) from
[<c00a235c>] (generic_handle_irq+0x34/0x44)
[ 1.984863] [<c00a235c>] (generic_handle_irq+0x34/0x44) from
[<c00153a0>] (handle_IRQ+0x4c/0xac)
[ 1.994110] [<c00153a0>] (handle_IRQ+0x4c/0xac) from [<c0008480>]
(gic_handle_irq+0x2c/0x60)
[ 2.002960] [<c0008480>] (gic_handle_irq+0x2c/0x60) from
[<c04f26e4>] (__irq_svc+0x44/0x60)
[ 2.011718] Exception stack(0xdc851c48 to 0xdc851c90)
[ 2.017028] 1c40: c07a87a0 00000000 dc851c80
00000000 c0743f80 dc851da8
[ 2.025604] 1c60: 00000001 00000001 dc851cd7 00000000 c02dbb6a
c02dbb6c ffffffff dc851c90
[ 2.034179] 1c80: c04f2440 c04f2444 60000113 ffffffff
[ 2.039489] [<c04f26e4>] (__irq_svc+0x44/0x60) from [<c04f2444>]
(_raw_spin_unlock_irq+0x28/0x2c)
[ 2.048797] [<c04f2444>] (_raw_spin_unlock_irq+0x28/0x2c) from
[<c001871c>] (die+0xe0/0x324)
[ 2.057647] [<c001871c>] (die+0xe0/0x324) from [<c0008444>]
(do_DataAbort+0x88/0x98)
[ 2.065765] [<c0008444>] (do_DataAbort+0x88/0x98) from [<c04f2664>]
(__dabt_svc+0x44/0x80)
[ 2.074462] Exception stack(0xdc851da8 to 0xdc851df0)
[ 2.079742] 1da0: 00000140 00000002 00000002
dc8ffc10 fa05b000 00000001
[ 2.088317] 1dc0: 00000000 20000093 dc8ffc10 00000000 00000081
00000000 c07a8f00 dc851df0
[ 2.096893] 1de0: c02dc2dc c02dbb68 60000093 ffffffff
[ 2.102203] [<c04f2664>] (__dabt_svc+0x44/0x80) from [<c02dbb68>]
(_set_gpio_triggering+0x44/0x264)
[ 2.111724] [<c02dbb68>] (_set_gpio_triggering+0x44/0x264) from
[<c02dc224>] (gpio_irq_type+0x0/0x160)
[ 2.121490] [<c02dc224>] (gpio_irq_type+0x0/0x160) from [<00002002>] (0x2002)
[ 2.128967] ---[ end trace 8b4b88305e6b2aff ]---
[ 2.133911] ---[ end trace 8b4b88305e6b2b00 ]---
[ 2.138763] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[ 2.138763]
[ 2.148376] CPU1: stopping
[ 2.151214] [<c001bd5c>] (unwind_backtrace+0x0/0xf4) from
[<c0019c74>] (handle_IPI+0x130/0x15c)
[ 2.160339] [<c0019c74>] (handle_IPI+0x130/0x15c) from [<c00084ac>]
(gic_handle_irq+0x58/0x60)
[ 2.169372] [<c00084ac>] (gic_handle_irq+0x58/0x60) from
[<c04f26e4>] (__irq_svc+0x44/0x60)
[ 2.178131] Exception stack(0xdc869e10 to 0xdc869e58)
[ 2.183410] 9e00: 00000000
00000000 00000002 60000113
[ 2.191986] 9e20: 00000000 dc868000 c07970e4 00000000 00000000
00000001 00000002 00000000
[ 2.200561] 9e40: 00000001 dc869e58 c00936f4 c0093704 60000113 ffffffff
[ 2.207489] [<c04f26e4>] (__irq_svc+0x44/0x60) from [<c0093704>]
(lock_acquire+0xac/0x104)
[ 2.216156] [<c0093704>] (lock_acquire+0xac/0x104) from
[<c007a8bc>] (rebalance_domains+0x5c/0x1a8)
[ 2.225646] [<c007a8bc>] (rebalance_domains+0x5c/0x1a8) from
[<c007ae84>] (run_rebalance_domains+0x44/0x14c)
[ 2.235961] [<c007ae84>] (run_rebalance_domains+0x44/0x14c) from
[<c004a864>] (__do_softirq+0xb4/0x214)
[ 2.245819] [<c004a864>] (__do_softirq+0xb4/0x214) from
[<c004aba0>] (irq_exit+0x90/0x98)
[ 2.254394] [<c004aba0>] (irq_exit+0x90/0x98) from [<c0019c48>]
(handle_IPI+0x104/0x15c)
[ 2.262878] [<c0019c48>] (handle_IPI+0x104/0x15c) from [<c00084ac>]
(gic_handle_irq+0x58/0x60)
[ 2.271911] [<c00084ac>] (gic_handle_irq+0x58/0x60) from
[<c04f26e4>] (__irq_svc+0x44/0x60)
[ 2.280670] Exception stack(0xdc869f88 to 0xdc869fd0)
[ 2.285949] 9f80: c07a87a0 c0022a40 00000000
00000000 dc868000 c07c8d08
[ 2.294525] 9fa0: c04fe078 c0743d70 00000000 410fc0f0 c0743fa0
00000000 00000000 dc869fd0
The device tree data for acquiring the above GPIO interrupt line looks
like this.
+++ linux-omap-storage/arch/arm/boot/dts/omap5-evm.dts 2012-07-30
14:11:08.931694001 +0530
@@ -42,7 +42,8 @@
tsl2771@39 {
compatible = "taos,tsl2771";
reg = <0x39>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <21>; /* gpio line 149 */
};
};
Note: using "gpio_request_one" in the driver solves the issue.
Is using this api in the driver required?
Any pointer on the above crash?
~Sourav
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/