[PATCH] tty: move the async flags from the serial code into the ttyincludes
From: Alan Cox
Date: Tue Aug 21 2012 - 09:18:21 EST
Huang - how about we add this patch first which moves the flags somewhere more sensible
and then your helper function (and probably a few others) would merge cleanly ?
Alan
--
From: Alan Cox <alan@xxxxxxxxxxxxxxx>
These are used with the tty_port flags which are tty generic so move the
flags into a more sensible place. This then makes it possible to add
helpers such as those suggested by Huang Shijie.
Signed-off-by: Alan Cox <alan@xxxxxxxxxxxxxxx>
---
include/linux/serial.h | 2 +
include/linux/tty.h | 1 +
include/linux/tty_flags.h | 78 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 81 insertions(+)
create mode 100644 include/linux/tty_flags.h
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 90e9f98..d63866d 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -15,6 +15,8 @@
#ifdef __KERNEL__
#include <asm/page.h>
+#include <linux/tty_flags.h>
+
/*
* Counters of the input lines (CTS, DSR, RI, CD) interrupts
*/
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 69a787f..dbebd1e 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -43,6 +43,7 @@
#include <linux/tty_driver.h>
#include <linux/tty_ldisc.h>
#include <linux/mutex.h>
+#include <linux/tty_flags.h>
diff --git a/include/linux/tty_flags.h b/include/linux/tty_flags.h
new file mode 100644
index 0000000..eefcb48
--- /dev/null
+++ b/include/linux/tty_flags.h
@@ -0,0 +1,78 @@
+#ifndef _LINUX_TTY_FLAGS_H
+#define _LINUX_TTY_FLAGS_H
+
+/*
+ * Definitions for async_struct (and serial_struct) flags field also
+ * shared by the tty_port flags structures.
+ *
+ * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
+ */
+#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes
+ * on the callout port */
+#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */
+#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */
+#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */
+#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */
+#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */
+#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during
+ * autoconfiguration */
+#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */
+#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */
+#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */
+#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */
+#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */
+#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */
+#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety
+ * checks. Note: can be dangerous! */
+#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */
+#define ASYNCB_LAST_USER 15
+
+/* Internal flags used only by kernel */
+#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
+#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
+#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
+#define ASYNCB_CLOSING 27 /* Serial port is closing */
+#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */
+#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */
+#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */
+#define ASYNCB_CONS_FLOW 23 /* flow control for console */
+#define ASYNCB_FIRST_KERNEL 22
+
+#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED)
+#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
+#define ASYNC_SAK (1U << ASYNCB_SAK)
+#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
+#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI)
+#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI)
+#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST)
+#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ)
+#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT)
+#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT)
+#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP)
+#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD)
+#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI)
+#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY)
+#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
+#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
+
+#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
+#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
+ ASYNC_LOW_LATENCY)
+#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
+#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
+#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
+
+#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
+#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
+#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF)
+#define ASYNC_CLOSING (1U << ASYNCB_CLOSING)
+#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW)
+#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD)
+#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ)
+#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW)
+#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1))
+
+#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/